Search the Community
Showing results for tags 'drop spindle'.
Found 5 results
-
I posted about making drop spindles for a local shop a while back. The first batch was received well so the shop owner ordered more. I've been working on them and it happens the first reading at our church service last Sunday was selected versus from Proverbs 31. It's generally accepted that king Solomon wrote proverbs and in chapter 31 he is extolling the virtues of a good woman or wife. Two of the versus were verse 13 and verse 19. I knew as soon as I read them I had to use them with this batch of spindles. I'm really happy with the laser engraving on this. You may notice a little notch on the right side of the whorl, that's on purpose and traps the wool when spinning.
- 9 replies
-
- 10
-
-
-
- proverbs 31
- laser engraving
- (and 6 more)
-
Happy Thanksgiving. Hope your lives are filled with friends, family and food. For those in Pennsylvania, good luck on the first day of buck season on Monday. Our Patriot Turners- Last week, @RustyFN showed us his basket weave illusion vase. He added to his post the jigs he used to create the weave lines- @Gerald posted a Christmas tree turning that he embellished. Check it out. I really like the star topper! @Steve Krumanaker makes items for a local artisan who works in wool. Steve found the perfect adornment for the drop spindles he makes- In his post, Steve tells us where he got the inspirations- What’s Coming Up- Click on the image for links to registration and more information- Cindy Drozda's Live Online Woodturning is this Friday November 24. For The Newbies- Tim Yoder turns some recycled plastic! Some fun with messy stuff all over the shop. The link to getting the plastic blanks is below the video's description. Click on "Watch on YouTube" for all the information. Expand Your Horizons- Lyle Jamieson's ornament video talks about design and vibration reduction- New Turning Items- Boy, Santa is really keeping any new items under wraps. Can't believe something hasn't been released for the holidays. Everything Else- From Ron Brown's weekly newsletter- Easier The Second Time Most folks are afraid to try new things. Turners are no different. 1) Fear of the unknown a. Your imagination presents all kinds of scary scenarios. You aren’t sure how long something might take, or what else you could end up needing. You don’t understand the process. b. You are not sure exactly how to get started or what steps to take and in which order. 2) Fear of failure a. Probably the number one reason people never get started. b. Your vivid imagination will show you all kinds of ways it could go wrong, how you might get hurt, or how you might damage your equipment in the process. 3) Fear that it’s not what you are used to and that is uncomfortable a. I know folks that only turn bowls because that is what they are used to. It’s the same with some pen-turners. We all have things we are very comfortable making and have become very accomplished at those items. The thought of making something different seems uninviting. When you finally work up the courage to try something different, you are stepping out of your comfort zone. Since we are all creatures of habit, new stuff isn’t what you are used to and it feels awkward. The first time you try, it is usually as hard as you imagined it would be. In Order To Learn New Things, We Must Be Willing To Fail. The first time you mainly learn what not to do. The second time you already know mostly what not to do and you can think about improving your sequence to gain a better result. From the third time on, you can focus on alternative techniques and tools. After that, if you are still interested in making more of this new item, besides improving your techniques and methods, you can work on variations, larger, smaller, additional elements, etc. John Jordan, a very well know turner who recently passed, always said “Life is too short to turn crappy wood.” I recommend you actually do use crappy wood the first couple of times because failure is part of succeeding. You shouldn’t have to fail with expensive materials. I recommend that you step out and try something new this week. I think you will be surprised at how much fun it is. You never know what you might like making once you try it. Safe turning
- 6 replies
-
- 6
-
-
- newsletter
- lyle jamieson ron brown
- (and 16 more)
-
Missed last weeks post so this one will be have a little extra. Our Patriot Turners- @nevinc posted a couple of projects he has been working on. First, a neat little table item that would be useful in any kitchen- Nevin combined woodworking and turning to complete the project- He also posted a question and his method of storing sawdust from various species of wood he uses as fillers. He was wondering what storage method the rest of us use for storage. Check out his post and let him know your method- And, Nevin showed us some beautiful walnut bowls he had finished- He received lots of positive comments in his post- @Steve Krumanaker has been busy fulfilling orders to some of the artisans in his area. He has been working with one who sells "Bee Products" for whom he make honey dipper lids. Steve posted a couple of short videos on how he has upgraded his manufacturing process. Steve is also making drop spindles for another craftsperson. These are used in the process of turning wool into yarn. He developed a neat jig to create shop made dowels for part of the pieces. In this post, he explains why he made the parts instead of buying them- @Gerald added a project to our "Off The Lathe And Finished" thread. These beautiful ornaments got lots of great comments and a couple of questions as well. Head on over to the thread and check out more on these- Gerald was also kind enough to provide links to videos on sharpening. I must apologize for not recording who asked the question on sharpening. Gerald had entered the AAW August Turning Challenge and provided us with the link to the voting and winners- https://www.aawforum.org/community/threads/august-2023-turning-challenge-final-results.21511/ @KevTN Asked for help identifying a specific pattern for the rim of a platter. Our turners had several suggestions. If you can identify this patter, please help out Kevin- @RustyFN has a gorgeous spalted bowl on his lathe! What’s Coming Up- Cindy Drozda is live tomorrow- Thursday, October 12 at 2pm EDT. She will be discussing how do you protect your eyes, ears, and lungs in the workshop. For registration, follow this link- https://streamyard.com/watch/PsF54zh7XSVb For The Newbies- Kent Weakly's video on what tools are not suitable for bowl turning- Carl Jacobson makes an oak lidded box. Notice that Carl uses both traditional and carbide tools to complete the project- A simple bowl turning to use as a succulent planter from Craft Supplies USA From Tim Yoder on choosing your sandpaper Richard Raffan demonstrates how to make your turned bowls look really top notch by refining the bottom. Expand Your Horizons- Several articles from Kent Weakley on bowl finishes. https://turnawoodbowl.com/my-favorite-food-safe-wood-finish-waterproof-almost/?ck_subscriber_id=1577117793 https://turnawoodbowl.com/make-shellac-wood-bowl-finish/?ck_subscriber_id=1577117793 https://turnawoodbowl.com/spray-lacquer-illustrated-guide-equipment-system-set-up-technique/?ck_subscriber_id=1577117793 Jim Rodgers continues his series on hollowing- Alan Stratton posted this video on YouTube. It reminded me of a similar project that @Gerald had shown us sometime back- The Four Ways videos from the first of the month- Mike Peace- Richard Raffan- Sam Angelo- Tomislav Tomasic- New Turning Items- From Niles Bottle Stoppers- https://nilesbottlestoppers.com/product/cocktail-muddler-set/ From Woodturners Wonders- Diamond wheels for both bench grinders and Tormek grinders- https://woodturnerswonders.com/collections/diamond-wheels?_kx=gV5SF2As_3IwtBi5TrpHVQM0F3UvGVbQKzhWGippDlk%3D.VJvU8R Everything Else- From Ron Brown's Newsletter- When you share the joys of your craft with someone who has never seen shavings fly off a fresh bowl blank or get to watch a spinning top appear in just a few minutes, you might change their world. A small pebble can create a world of ripples. Members of our woodworking club have attended county fairs, woodworking shows, and symposiums which always included live demonstrations. Why? Most people can’t visualize what we do. I’ve seen people become fascinated with turning after they made a simple maple or oak pen at one of these events. I’ve seen their entire family get interested and turning became their family hobby. They’ve planned family trips around turning shows and symposiums along with week-long hands-on learning at folk schools. I’ve witnessed folks buying their first mini lathe and accessories then go on to develop a lifelong passion for the smell of freshly milled lumber and the shavings from another bowl blank. The benefit to you of doing something like that is they bring their non-turning skill sets from their regular jobs, i.e. management, leadership, and organizational skills. Many have become club officers including President. One such fellow served three terms and on a personal note, became my dentist until he retired. We’ve seen lawyers, engineers, business executives, moms, teenagers, pastors, and doctors get the turning bug all because they saw a turning demonstration at a craft fair or other public event. I’ve told the story many times of how I attended a two-hour club demonstration in a cold dark basement one Saturday between Christmas and the New Year. Nick Cook made a top, a garden dibble, a honey dipper, a toothpick holder, and a mahogany plate plus some other things I don’t remember. One couple thought that was terrific and booked a day's instruction with Nick. Then they started a turning club, then I attended, then I got hooked. Now I make a great living inventing and offering turning accessories to the turning community worldwide. During the thirteen years I was on the Woodworking Show Circuit, I was able to demonstrate turning in front of over a million people. That’s a pretty good ripple! Thank you, Nick Cook. In order to cause the ripple, you have to toss the stone in the first place. I would encourage you to invite someone to a club meeting or over to your shop for an hour or two for coffee and to make some shavings. You never know how big that ripple might become Safe turning
- 4 replies
-
- 6
-
-
-
- tomislav tomasic
- sam angelo
- (and 42 more)
-
I posted a couple weeks ago about a shop contacting me to make drop spindles which are used in spinning wool. There are two basic components, the "whorl" which is pretty easy and quick to do. The shaft, which is a little problematic. The shaft needs to be about 12" long and around 5/16" diameter. Kind of difficult and tedious to turn and with a small margin I need to turn them as quickly as possible. Looking for options I bought a dowel jig that uses a drill motor to create a dowel. It works but I got more tearout than I liked, especially on woods like oak or ash. I then did some searching and watched some videos about using a table saw to make dowels. You read that right, you can make a dowel or spindle using your table saw. It works, and it works pretty darn good. Pretty nice finish which will require just a little sanding and it's pretty consistent as far as diameter Produce_5.mp4
- 10 replies
-
- 7
-
-
-
- woodturning
- spindle
- (and 8 more)
-
A lady who owns a local spinning shop contacted me and asked about making her some drop spindles to sell in her shop. Now, I've heard of drop spindles and I've even seen pictures of some others have turned but I never really knew what they are for or do. I visited her shop and I was stunned. I had no idea spinning wool is still a thing. VERY nice shop with knitted and woven items every where. She sells equipment, wool, and teaches the craft. It was really an interesting visit. She didn't have any drop spindles like she wanted made and she was sold out and her current mail order supplier wasn't responding or filling orders. She described what she wanted and said she's wanted someone local for a while and one of her customers gave her my name. Don't know what will come of this but here are four of the first ones I've made for her. They are about 11" long and the "whorl"(new word for me) is about 2 1/2" diameter. According to the shop owner drop spindles predate spinning wheels by a few centuries and basically evolved from sticks. The underside is hollowed to provide stability and shift the mass to the rim so they spin longer. The Easy finisher is the bomb for that. Basically no sanding here.
- 6 replies
-
- 7
-
-
-
- woodturning
- wool
- (and 9 more)
.png.f004ec4f531fc97f2770d5e0a983ac56.png)
.png.412cfc6ee24db21f58cce132992ccf08.png)
-.png.f849b758464fd3a37baa1e9bface1e04.png)
