Search the Community
Showing results for tags 'transitional'.
Found 8 results
-
The local resale store proprietor sometimes texts me when there is something that might interest me. I got one of those texts last week and stopped by to find that she had a little transitional plane for me to look at. I have had a general rule to not buy a lot of transitional planes but this little guy just spoke to me so a rule was broken once again! Nothing too unusual here, just a nice little transitional smoother. HSB Revonoc marked on the toe so Conover Hardware Co. and it has a 92 patent Stanley iron in it. The iron has been well sharpened, about 3/4 of the wat worn to the keyhole. Aside from wiping off the dust, is in nice overall condition with minimal rust. I intend to spruce it up a bit in time but thought I would share a few pics as I got it. 10 bucks damage on this one.
-
From the album: Shaker Furniture
A wonderful project, I highly recommend anyone to build these chairs, suitable for most skill levels. The weaving in this seat was considerably more challenging than the square stools I weaved. The trapezoidal shape of the seat created some interesting challenges, but I got through them.- 4 comments
-
- 3
-
-
- weaved seat
- cherry
- (and 4 more)
-
.jpg.c37357ab77e5aabde236b5434b1389e9.jpg)
From the album: Shaker Furniture
This morning I put the final coat of General Finishes Gel Topcoat on our chair, it should be ready to weave the seat tomorrow, I hope!- 4 comments
-
- 2
-
-
- new lebanon
- shaker
- (and 5 more)
-
.jpg.a53b56812ee21653e4ab0b7a7d269b90.jpg)
From the album: Shaker Furniture
Once I weave the seat into the chair, it will be striking, I am very happy with this project. -
.jpg.691540d03f52ce1850f907ce01b33011.jpg)
From the album: Shaker Furniture
I love the patina this chair gained during the finishing, the cherry just got deeper, richer and thick. I love the tone. -
.jpg.aad3d1009b3834fc1355de91dbed0226.jpg)
From the album: Shaker Furniture
The side view looks just as good as the front view, I am happy with the results thus far. -
.jpg.bd1dbd78300073b3e905eb209ba215b6.jpg)
From the album: Shaker Furniture
I dry fit the chair together and checked for fit, mortises, tenons, racking, and square, it all lined up beautifully. -
From the album: Shaker Furniture
After each chair piece has been sanded to 600 on the lathe, I pick up a handful of shavings and push them onto the piece while it's spinning at max RPM. An instant sheen or glow appears, I enjoy this final touch before I pull it from the centers.- 3 comments
-
- 1
-
-
- new lebanon
- rocker
- (and 5 more)
.thumb.jpg.573d1497d0675219908c85aabefd797a.jpg)