Search the Community
Showing results for tags 'marker'.
Found 3 results
-
Got one of a set of nesting tables from a friend that had a leg broken off. Process of repair: Take off one end of legs with the damage Work apart the joint on the other end since the dowel pins were at right angles Find broken off pieces and glue and clamped them back on Removed broken off dowel pin. Cleaned out holes Filled remaining missing piece with stick epoxy, let cure a few minutes then chisel and sand down to flush Glued in new dowel pin and reglued the rest Lighty sand top Apply a bit of touch up marker where needed Apply a couple coats of shellac, then a coat of lacquer Before Putty with overfill Putty after sanding Glue up Back together
-
From the album: A Wedding Cross
Laid out some lines with a nice old Japanese marking knife and my home made square. I also scribed some limit lines on the edge of the boards to cut down too.-
- 2
-
-
- marker
- marking knife
- (and 2 more)
-
This image is an open sourced image uploaded to this community for re-use within our community graphics.© Attribution 4.0 International (CC BY 4.0)
.thumb.jpg.573d1497d0675219908c85aabefd797a.jpg)