December 13, 20214 yr Popular Post Good Monday morning! Good Monday morning Patriot Woodworkers! What did you get done over the weekend, and what have you planned for the week ahead! Inquiring minds want to know. Please tell us what's happening in your shops, your life, and any events going on with you. Thank you for being here folks! Welcome new members To view our newest members and welcome them to our digs, please see our Members Page, you can "Sort" by join date and click on their names and be taken to their profile page where you can leave a message of welcome. Thank you for making our newest folks feel welcome. Featured topic @forty_caliber MonkeyPod Bowl is a wonderful turning by forty. Featured download It's rare that a member shares a download with our community, if you would like to share a plan, a file, or even a drawing schematic, please do so at our Download department. None this week. Featured link No new links this week. Featured video My favorite magazine creators of Mortise and Tenon Magazine, have produced another wonderful video about setting up your hand tool shop, or if you are simply interested in back saws, this is a must see. Enjoy!
December 13, 20214 yr Popular Post Supposed to be some nice weather, for this time of year, this week. Want to go out and hit the leaves one more time since they were late this year. Putting the finishing touches on the Christmas stuff.
December 13, 20214 yr Popular Post Spent yesterday playing with Sketchup. Learning how to create dovetail drawings in preparation for making a storage box. Supposed to be a little warmer so maybe I can get the rolling pin holders polyed.
December 13, 20214 yr Popular Post Finished up the bowls on commission. Now have 23 hand bells to complete turning and doing finish on them. We are having a Christmas party for 29 people tomorrow night so got lots of Honey Does for that.
December 13, 20214 yr Popular Post Working on design for small cabinet for finishing room. As always I want several options but the reality is I can have 2 of 3 but not all 3. Edited December 13, 20214 yr by Gunny
December 13, 20214 yr Popular Post 3 minutes ago, Gunny said: Working on design for small cabinet for finishing broom. As always I want several options but the reality is I can have 2 of 3 but not all 3. Mmmm does that broom sweep everything away?
December 13, 20214 yr Popular Post 4 minutes ago, Gunny said: Working on design for small cabinet for finishing broom. As always I want several options but the reality is I can have 2 of 3 but not all 3. Just now, Gerald said: Mmmm does that broom sweep everything away? Maybe....
December 13, 20214 yr Popular Post Working the J.O.B. this week. Not really expecting much in the way of shop time during the week. 14 minutes ago, Gunny said: Working on design for small cabinet for finishing broom. As always I want several options but the reality is I can have 2 of 3 but not all 3. Is that going next to the board stretcher or the OD bore gauge? .40
December 13, 20214 yr Popular Post Spent most of the weekend learning about the Shopsmith that I picked up a couple weeks ago. @Masonsailor was nice enough to drop by and give me a crash course and point out some of the really clever design features of the machine. Ran through the setup process yesterday to make sure everything is squared up, cleaned, lubricated, waxed, etc... I got a ton of accessories and ancillary parts with this machine but much to my amusement the one thing that I didn't get was an upper spindle drive hub for SPTs so I will definitely be ordering a couple of those today.
December 13, 20214 yr Popular Post Getting my "honey-do" listS accomplished. Both grand-daughters will be home for Christmas break by the end of the week. Need to take recycling to drop off point; also trip to John Deere store to pick-up some special order parts. Weather will dictate any garage or outside work. Supposed to warm up along with MUCH NOT NEEDED rain. Today's focus will be locating my get-up & go. I've found 7 pencils and a stale donut so far but...
December 13, 20214 yr Popular Post I need to get the drawers installed in the media room and then continue on with the Xmas presents. Paul
December 13, 20214 yr Popular Post 55 minutes ago, Grandpadave52 said: Today's focus will be locating my get-up & go. It probably done got up and went somewhere with mine.
December 13, 20214 yr Popular Post 17 minutes ago, Larry Buskirk said: It probably done got up and went somewhere with mine. That likely won't be good for any of us
December 13, 20214 yr Popular Post 28 minutes ago, Grandpadave52 said: That likely won't be good for any of us Must be really lost, haven't seen it in awhile.
December 13, 20214 yr Popular Post Had to go to the UPS store to send off that box. Then to the grocery store to pick up some candy and cookie making supplies for Phyl. Now, to work on the planer. It's the DeWalt 735 with the Shelix head. Yesterday, I ran a piece of walnut and got some nasty ridges. Nothing that a bit of sanding couldn't fix but, there are about 50 boards to plane and, I'm really not in to sanding them all before the glue up. so, some cutters will need adjusting. Besides, it just ain't supposed to do that. Hope to get several of the leg blanks in clamps by eod Thursday. Friday, we pick up my sister who's flying from IL to spend a week with us. She lands at a small airport in Mesa. So, we don't have to fight the traffic at the Phoenix Sky Harbor airport. There will be very little shop time next week. But, we'll hit it hard the next week! It really feels good to finally be making Some sawdust.
December 13, 20214 yr HmmmMonday? Not off to a very good start....guess I can't even stay in bed.... 1 minute, I'm sleeping quite peacefully IN the bed....only to get awakened by a crash....somehow I had landed face down on the bedroom floor..2' down below where I thought I was.....LZ Nose, LZ Elbows, and LZ Knees were complaining...then Uncle Charles decided to try and help me stand up...by cramping up the legs....and, NO..I did not bounce..that I know of..nor, left a dent in the floor... On that note..shop stays closed, today... Edited December 13, 20214 yr by steven newman
December 13, 20214 yr Popular Post 2 hours ago, Larry Buskirk said: Must be really lost, haven't seen it in awhile. In 12 months, all I've done in the shop is re-arrange a few things and try to clean up a little. Then the LOML hands me a honey-do list. It seems that the hot decorating item this year is tree cut-outs, so after a bit of research, I ended up making these for a friend. She was ecstatic! Now I have to find tine, and wood scraps, to make more! These are 10", 12" and 14" tall, not counting the bases. Feels good to make a little sawdust again.
December 13, 20214 yr Popular Post 30 minutes ago, HARO50 said: In 12 months, all I've done in the shop is re-arrange a few things and try to clean up a little. Then the LOML hands me a honey-do list. It seems that the hot decorating item this year is tree cut-outs, so after a bit of research, I ended up making these for a friend. She was ecstatic! Now I have to find tine, and wood scraps, to make more! These are 10", 12" and 14" tall, not counting the bases. Feels good to make a little sawdust again. Ya' done good John. Very nice. Glad you're stirring up some dust again that doesn't involve cleaning. Edited December 13, 20214 yr by Grandpadave52
.thumb.jpg.573d1497d0675219908c85aabefd797a.jpg)
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.