Skip to content
View in the app

A better way to browse. Learn more.

The Patriot Woodworker

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Lathe Tool Sharpening System

Featured Replies

Fairly new to the forum, and certainly new to turning. I've been a cabinet maker for more than 30 years but haven't used a lathe since high school shop. (which is longer than I would like to admit)

I bought a Delta 46-541S many years ago at an auction and it has been sitting around my shop ever since. I'm starting to slow down with my cabinet making and want to start turning a few things. The lathe came with a set of tools and I know carbide tools are a possibility too. I have one square carbide chisel and can see the benefit of both type tools. At least at my experience level. I know the older Delta lathe isn't optimal and will certainly buy something else in the future if all works out.

My question is there any recommendations out there for a sharpening system that's best for all tool types, certainly not carbide, that will serve me well for years to come? (i.e no other adapters or add on parts later for certain tools.) Also what's the best option for a grinding wheel? Maybe I should say less expensive best option.

I have both an 8" and 6" grinder already. I would rather buy a system for the 6" grinder unless there's an advantage to having on an 8" grinder.

Hopefully these aren't dumb questions and thanks in advance for the help!!

Bryan

Hi Bryan and Welcome to the Patriot! I'll try to answer some of your questions and I'm sure our other turners will be along shortly with more information!

Probably one of the most popular sharpening systems is the Wolverine sharpening setup-

https://woodturnerscatalog.com/products/oneway-wolverine-sharpening-system-4-piece-set

https://woodturnerscatalog.com/products/oneway-sharpening-essentials-6-piece-set?pr_prod_strat=e5_desc&pr_rec_id=a01e288ef&pr_rec_pid=6921692971031&pr_ref_pid=6921693429783&pr_request_id=09cd4b2c-1038-4551-8b54-807ae9197208-1795189537&pr_seq=uniform

The 8" grinder setup will create a slightly less concave grind on diamond parting tools and the underside of gouges. A slow speed grinder will create less heat when sharpening. "White" wheels are good for sharpening although the CBN wheels are also popular and remove less material from the tools but they are more expensive. Here's a source if you want to go the CBN route-

https://woodturnerswonders.com/collections/cbn-wheels

Hope this helps. If you have any questions about the site, let me know!

Watch for our Wednesday’s Wisdom For Woodturners. We are always looking for projects, ideas and suggestions. Please jump in and tell us what you think!

Lew

Welcome to the forum! As a not-so-good turner (I've been a hack for longer than I care to admit, and too long to consider my self a beginner) I settled on the wolverine system Lew described for my turning tools. It makes getting repeatable results a lot easier. I use an 8" slow speed grinder with mine, though I think the system works with a smaller one as well. That said, I do my skew chisel and scraper free hand, using the Wolverine platform (as opposed to the Vari grind which is useful for gouges and such).

Bryan,

I purchased the Pro Grind Sharpening System for 8 Inch Benchtop Grinders and since then I’ve had a bit of love / hate relationship with it. I did end up ordering a ONEWAY Wolverine Vari-Grind Attachment to go along with it. The pro grind works good as long you like the preset angles. The vari-grind gives you more options but cost a little more.

You might also want to invest in a CBN Grinding wheel, another purchase I don’t regret buying.

Edited by Gordon

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.