Gunny Posted October 8, 2019 Report Posted October 8, 2019 Northfield still in business. For $34,000 you can own a new one. Beautiful saw. Everything they say it is. But impractical for most of us. Artie, Cal and Fred W. Hargis Jr 3 Quote
Gene Howe Posted October 9, 2019 Report Posted October 9, 2019 (edited) I saw a used on on eBay for 19k. If I read the specs correctly, it was 5 hp and, it took a 14" blade. A beast. There were several others for between 3 and 5k. Edited October 9, 2019 by Gene Howe Gunny 1 Quote
Larry Buskirk Posted October 9, 2019 Report Posted October 9, 2019 6 minutes ago, Gene Howe said: I saw a used on on eBay for 19k. If I read the specs correctly, it was 5 hp and, it took a 14" blade. A beast. There were several others for between 3 and 5k. That's still way out of my budget! Gunny 1 Quote
Gunny Posted October 9, 2019 Report Posted October 9, 2019 4 hours ago, BillyJack said: Why is the saw $36k Good question, I would have made a link this afternoon but was busy at work. Again for everyone keep in mind this saw was meant for a full on woodshop. Durable, and will last a LONG time. Yes, it is pricey, and if you have the money and urge to get one for your shop, GO FOR IT! I have seen one in the flesh and got a chance to run some boards for my friend through it. Awesome!!! Do I have one, negative red rider. If your wife leaves you, or kicks you out of the house, well actions have consequences. Here is a LINK Takes you to Northfield tools, specifically the specs on a #4 Standard Tablesaw. Here are just a few of the goodies. Wide Choice of Models ---Northfield Tilting Arbor Variety Saws are available in four different models, each of which is designed for a variety of uses. Each model can accommodate saw blades from 14" to 18". The saww arbor can be tilted from 0 degrees to 45 degrees through a conveniently located hand wheel. A vertical saw adjustment of 4" is standard. The stock capacity for each machine is listed in the specifications. Each Machine is Electronically Balanced ---Each Northfield machine is carefully tested with modern vibration analyzing equipment. Even conditions hidden frm view which might interfere with the smooth, long life of the machine, are detected and corrected. Precision Tables ---All tables on Northfield Tilting Arbor Variety Saws, whether stationary or rolling, are carefully seasoned, heavily ribbed and precision planed and polished to maintain accuracy. A graduated scale is marked on the top for ripping widths. Dovetailed slots are provided for the sliding gauges. The Gauges ---Two sliding, combination, cut-off or miter gauges are provided with dovetail slide strips permitting them to be drawn clear of the table without falling. An adjustable rack and pinion type rip fence is furnished. 23 minutes ago, Gene Howe said: I saw a used on on eBay for 19k. If I read the specs correctly, it was 5 hp and, it took a 14" blade. A beast. There were several others for between 3 and 5k. Still out of my league on the price, never mind the space. But one can dream. Cal and Artie 2 Quote
BillyJack Posted October 9, 2019 Author Report Posted October 9, 2019 Nothing against the saw but I would only buy that saw is to put a powered feed on it and run it an 8 hr shift just to cut molding of thick tables and for most there going to beam saws for tables. At this point for long term usage it might be fine. But I don't know as I have never work in a shop with one. Now being a cabinet maker, a commercial cabinet maker and currently a furniture maker for that kind of money I would drop that kind of money on a Altendorf F45. Then you got the whole package. I know of powermatic and unisaws that have been around 20-30 years. It's not expensive to correctly change out bearing,etc if there correctly maintained Cal 1 Quote
Ron Altier Posted October 9, 2019 Report Posted October 9, 2019 My wife likes to watch the home remodel, rebuild, etc shows. I pay particular notice to the saws and other tools they use. Professionals don't buy cheap or low performing saws. I saw that most use the Dewalt construction table saws. I read the reviews on all saws before I got my Dewalt. It saws smooth, and consistently square, ripping or cross cutting. With my very limited space, it is my favorite. Cal and Artie 2 Quote
BillyJack Posted October 9, 2019 Author Report Posted October 9, 2019 8 minutes ago, Ron Altier said: My wife likes to watch the home remodel, rebuild, etc shows. I pay particular notice to the saws and other tools they use. Professionals don't buy cheap or low performing saws. I saw that most use the Dewalt construction table saws. I read the reviews on all saws before I got my Dewalt. It saws smooth, and consistently square, ripping or cross cutting. With my very limited space, it is my favorite. Sometimes that's the way to find out what's being used. Just be careful as sometimes it's just who is paying the bill Gunny, Cal and Artie 3 Quote
Gunny Posted October 9, 2019 Report Posted October 9, 2019 1 hour ago, BillyJack said: Now being a cabinet maker, a commercial cabinet maker and currently a furniture maker for that kind of money I would drop that kind of money on a Altendorf F45. Then you got the whole package. I agree, and like you said being in a commercial setting changes the game. Now the Altendorf F45, another beautiful example of exquisite machinery. But also way out of reasonable price for the majority of home wood workers. 1 hour ago, BillyJack said: I know of powermatic and unisaws Nice saws as well, and closer to reality for home woodworkers. Bit on the high end but deals can be had and as you mentioned they can be fixed. I have the same Delta Contractor saw my Dad and I used when I was in high school. Bought one for myself later in life, now have both in a single cabinet set up. Maintained they have given us service since 1983. Both saws have the original motors. Nothing has broken, only updated the switches to magnetic switches. I used to drool over getting a Unisaw, just never happened. In looking back kinda glad. I might have had a lot more issues making my twin TS set up with two Unisaws. Not impossible, but not the same either. Cal and Artie 2 Quote
Gerald Posted October 9, 2019 Report Posted October 9, 2019 Looked at the specs on the Northfield and that beast actually has a 18 inch blade option. For me kinda like buying a Lamborgini and just parking it in the garage and not driving it, cause that is about hiw much I use my TS now. Gunny, Artie and Cal 2 1 Quote
Gunny Posted October 9, 2019 Report Posted October 9, 2019 2 minutes ago, Gerald said: that beast actually has a 18 inch blade option. Yeah I saw that as well. Sent a picture to my Dad and told him I need this. He replied, "You won the lottery?" Artie, Cal and Gerald 3 Quote
Al B Posted October 9, 2019 Report Posted October 9, 2019 We all have budgets and needs to consider. As a hobbiest and handyman, my 10" Jet contractors saw with biesmeyer fence has served me well for several years. Artie, Gunny and Cal 3 Quote
Gunny Posted October 9, 2019 Report Posted October 9, 2019 5 minutes ago, Al B said: We all have budgets and needs to consider. I have champagne tastes, but am on a diet low fat beer budget. Cal, Artie, Gene Howe and 1 other 4 Quote
Fred W. Hargis Jr Posted October 9, 2019 Report Posted October 9, 2019 (edited) For those questions about why Northfield tools cost so much, this tour of the plant might explain some of it. It's only 15 minutes, and I found it interesting...I first saw this some time back on another forum. Edited October 9, 2019 by Fred W. Hargis Jr Al B, Artie, Gunny and 1 other 4 Quote
CharlieL Posted October 9, 2019 Report Posted October 9, 2019 8 hours ago, Ron Altier said: Professionals don't buy cheap or low performing saws. I saw that most use the Dewalt construction table saws. I read the reviews on all saws before I got my Dewalt. It saws smooth, and consistently square, ripping or cross cutting. With my very limited space, it is my favorite. I believe they are actually called Jobsite saws. In my opinion they are overpriced plastic and aluminum bench top saws with maybe a better fence. For a small saw Delta made a small contractor's table saw, it is my favorite. Cal 1 Quote
CharlieL Posted October 9, 2019 Report Posted October 9, 2019 15 hours ago, BillyJack said: I'm not worried about it ,I fear for you.. Whatever thats sapose to mean. Quote
Larry Buskirk Posted October 9, 2019 Report Posted October 9, 2019 7 hours ago, Woodbutcherbynight said: I have champagne tastes, but am on a diet low fat beer budget. Hey Gunny, Get it when you build that 150,000 S.F. shop on the 20 acres out by Gene. Gunny, Artie and Al B 3 Quote
BillyJack Posted October 9, 2019 Author Report Posted October 9, 2019 (edited) I tell you what, when working at Jacobe furniture we had a Powermatic 126 slider that took a 16 blade. It's a lot of blade and scary to use. I didn't operate the saw but didn't like being around it when it was on. It makes a sound thats easy to hear and say s"get away" and that's what I did.... If you've never been around those big blades it will definetly make you think about operating such a blade.there is a lot of flex in those bladed. Edited October 9, 2019 by BillyJack Gunny and Al B 2 Quote
Gene Howe Posted October 9, 2019 Report Posted October 9, 2019 2 hours ago, Larry Buskirk said: Hey Gunny, Get it when you build that 150,000 S.F. shop on the 20 acres out by Gene. Yeah, Gunny. And, I'd happily help you use it. Gunny, Al B and Artie 3 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.