April 26, 20232 yr Popular Post Hard to believe that April is almost over! Our Patriot Turners- One of our long time forum members @Mark Wilson posted a couple of his projects. First is a beautiful natural edge walnut bowl Mark's post has some progress shots! Mark also posted some cool screwdriver handles! In his post there are several different designs- If you get a chance, check out Mark's profile- https://thepatriotwoodworker.com/profile/1926-mark-wilson/?tab=activity @Steve Krumanaker was busy in his shop! This gorgeous goblet is for his club's President Challenge. Steve explains more in his post- Steve also works with a local gift shop. He turns custom lids for one of their products. Check his post to see where these beauties are used. A while back, @jthornton told us he was working on a "dizzy bowl". He got a chance to post his progress- More images in the addition to his original post- @HandyDan continues to amaze us with his tiny turnings. This week he used some really old red wood. The growth rings are really amazing. Check his post for more images- "What's On Your Lathe" continues to receive lots of interest. Thanks to everyone for making this a popular thread! What’s Coming Up- Click on the images for links to registration and more information- For The Newbies- A lot from Richard Raffan this week. Here he shows how to mark center and laying out diameters on a wood lathe. Considering turning a bottle stopper? Nice video with step by step instructions. Expand Your Horizons- Last week we posted a video from Alan Stratton on making inside out turnings. One of his turnings had a flame shape. This video takes us through how that turning was done. Mike Waldt turns a beautiful cherry vase from a log- If you add carved embellishments to any of your turnings, a carving stand can be invaluable. They can be purchased or as Mike Peace shows us- they can be made from simple materials New Turning Items- Setup jigs for sharpening lathe tools, from Ron Brown- https://www.longworthchuck.com/index.php?route=product/product&path=30&product_id=427 Everything Else- Had a little time at the lathe this week. Finish turning a roughed out little elm bowl. Still experimenting with the Easy Wood Tools beading cutters @Jordan Martindale. Tried to make the bead, at the lip of the bowl, set centered on the rim. The outside and top of the bead was pretty straight forward. To turn the inside portion, I had to run the lathe in reverse to get the proper angle on the tool. My lathe sets against a wall so access for turning is only from the front. Came out OK for my first try. A smaller bead as a foot sorta carries the theme from top to bottom. Safe turning
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.