October 18, 20214 yr Popular Post Good Monday morning! Good Monday morning Patriot Woodworkers! What did you get done over the weekend, and what have you planned for the week ahead! Inquiring minds want to know. Please tell us what's happening in your shops, your life, and any events going on with you. Thank you for being here folks! Welcome new members To view our newest members and welcome them to our digs, please see our Members Page, you can "Sort" by join date and click on their names and be taken to their profile page where you can leave a message of welcome. Thank you for making our newest folks feel welcome. Featured topic @HandyDan and some wonderful awl's. This topic also caught my eye for the pleasing presentation and his thoughtful tagging of the topic, well done Dan! Featured download It's rare that a member shares a download with our community, if you would like to share a plan, a file, or even a drawing schematic, please do so at our Download department. None this week. Featured link No new links this week. Featured video One of my favorite YouTube channels is Townsends. Here is an informational and historical breakdown of axes. Enjoy!
October 18, 20214 yr Popular Post About ready to cut and install melamine white boards for the laser and SCMS bench. After those get done, it'll be time to finally reassemble my Jointech system....providing I can remember how it goes together. Shoulda took some pictures before I took it apart.
October 18, 20214 yr Author Popular Post 11 minutes ago, Gene Howe said: About ready to cut and install melamine white boards for the laser and SCMS bench. One of the things I love about melamine coverings for shop furniture like this, specially for the table saw side table, is you can jot down numbers with a pencil on the surface, it cleans up great with windex. Often I'd take a measurement, then go straight to the saw, and just jot down the measurement on the melamine before I forgot it, it's serves second duty as a whiteboard.
October 18, 20214 yr Popular Post Off to the hospital, Marie is having some kind of test for her impending stomach/esophagus surgery. Any time available this afternoon might be spent in the shop. I have a bowl in the lathe I haven't touched for 6 days or more, I may get back to practice on it.
October 18, 20214 yr Popular Post 36 minutes ago, John Morris said: One of the things I love about melamine coverings for shop furniture like this, specially for the table saw side table, is you can jot down numbers with a pencil on the surface, it cleans up great with windex. Often I'd take a measurement, then go straight to the saw, and just jot down the measurement on the melamine before I forgot it, it's serves second duty as a whiteboard. Thanks, John. Do Sharpies wipe off with Windex? All our dry erase markers have dried up.
October 18, 20214 yr Popular Post 18 minutes ago, Fred W. Hargis Jr said: DNA will wipe off sharpies. So, I gotta bleed on it? Kidding aside, thanks for that tip, Fred!
October 18, 20214 yr Author Popular Post 32 minutes ago, Gene Howe said: Thanks, John. Do Sharpies wipe off with Windex? All our dry erase markers have dried up. Not sure about Sharpies and Windex Gene, I always used pencil.
October 18, 20214 yr Popular Post Got some windows to wash outside and a few other small chores. Going after those when the weather permits and hitting the shop otherwise.
October 18, 20214 yr Popular Post Still working through datacenter software upgrades. The good news is that about half the estate is finished. VXRails delivered but as yet unpowered...hurry up and wait. .40
October 18, 20214 yr Popular Post 2 hours ago, forty_caliber said: Still working through datacenter software upgrades. The good news is that about half the estate is finished. VXRails delivered but as yet unpowered...hurry up and wait. .40 Finally, someone says something I understand
October 19, 20214 yr Popular Post Yep...that "Monday Thingy".....was trying to slip by without it being aware....... have a small box to sand... Splines were a bit hard to sand..but...we have ways... Picked at a garage sale a few months back....it even had the right contour block....
October 19, 20214 yr Popular Post Spent the morning doing final cleanup of shop of a deceased club member. After getting back to the shop with more stuff than I need I finished the platter I left on lathe yesterday. Pictures in turning.
October 19, 20214 yr Popular Post Monday? Glad I missed it! Actually was a nice sunny day that got things dried up enough to get half of the mowing done. Today's supposed to be more of the same, so will attempt to get the other half done.
October 19, 20214 yr Popular Post Spent yesterday mowing the lawn and other yard chores. Likely spend a good bit of this week on making a new panel sled for my table saw. I have an old one patterned after Norm's NYW. I have been watching a William Ng you tube video and I really like his, I think it will be a major upgrade.
October 19, 20214 yr Popular Post I understood a couple of posts and now we are on to "lawns" and "mowing". Next someone will say that water falls from the sky or some such voodoo. If I can get some free time I am going to drill a whole bunch of holes in the workbench tops.
October 19, 20214 yr Popular Post 3 minutes ago, Static_LV said: If I can get some free time I am going to drill a whole bunch of holes in the workbench tops. I do that all the time- but not on purpose
.thumb.jpg.573d1497d0675219908c85aabefd797a.jpg)
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.