January 15, 20197 yr 23 minutes ago, Grandpadave52 said: Is that where s(p)alted wood originates? SNORK!!!
January 16, 20197 yr Popular Post 13 hours ago, Gene Howe said: Gator, stick with the 3 In One. Just ask yourself if you've ever seen sawdust on those sheaves. Got it done today. Actually, I still use the turbine oil sent to me by Mr. Bill Mayo who rebuilt these headstocks. He sent me a bottle of Zoom with a very long neck just like the ones they use at the factory. I find it much easier to use with that long neck. Got it all waxed except for the insides of the headstock. I need to wipe out with mineral spirits and then apply the paste wax. Right now, it works wonderfully. I waxed the locks and they work well. Tomorrow, I'll get that done and start on the bandsaw. Getting the itch to throw some wood up there and get 'r done. While oiling the sheaves today, noticed my main belt is wearing. Time to get a new one. Can't do without this machine. I need to pull out the second one and give it a good going over as well. Edited January 16, 20197 yr by FlGatorwood
January 16, 20197 yr 22 hours ago, Woodbutcherbynight said: The Ace Hardware close to my work has some, will pick up tomorrow and give the TS a swirl. shake well before and during use...
January 16, 20197 yr 2 minutes ago, Stick486 said: shake well before and during use... Him or the Zoom? Edited January 16, 20197 yr by Grandpadave52
January 16, 20197 yr 5 minutes ago, Grandpadave52 said: Him or the Zoom? in this case.. Him.. Zoom doesn't need shaking... but the dry lubes do...
January 16, 20197 yr 22 hours ago, Woodbutcherbynight said: The Ace Hardware close to my work has some, will pick up tomorrow and give the TS a swirl. clean really well what ever you are going to lube 1st...
January 16, 20197 yr On 1/15/2019 at 1:56 AM, Stick486 said: you'll really like it... Got this for $8 at Ace by my job. Have to see how it works. Anything I should do as in cleaning before using this on the TS carriage?
January 16, 20197 yr brake cleaner clean... DO NOT use carb cleaner... remember... very little goes a very long way.... Edited January 16, 20197 yr by Stick486
January 16, 20197 yr 3 minutes ago, Stick486 said: DO NOT use carb cleaner... Don't use this stuff, even at work. Brake cleaner I have several cases of as I can buy in bulk through work.
January 16, 20197 yr 56 minutes ago, Stick486 said: be stingy when you apply the TF... Gotcha. On another topic. This is a mock up of the air inlet for the lower part of router. One of these on both sides of the cabinet. Opening space is 1 1/2 times the area of the DC. Enough?
January 16, 20197 yr 1 hour ago, Stick486 said: go 2x... one on each side of the motor is 3 x the air the DC can pull in, roughly. I could do the math but I cannot find my Abacus.
January 17, 20197 yr Popular Post 5 hours ago, Woodbutcherbynight said: I could do the math but I cannot find my Abacus. hsa_math_reference_sheet_v2.pdf CLICK TO ENLARGE...
January 17, 20197 yr 5 hours ago, Woodbutcherbynight said: one on each side of the motor is 3 x the air the DC can pull in If it's too much vane the openings to fine tune the system...
January 17, 20197 yr 6 minutes ago, Stick486 said: CLICK TO ENLARGE... I clicked on it, but it stays the same
January 17, 20197 yr 2 minutes ago, Grandpadave52 said: I clicked on it, but it stays the same cursor on the chart... left click...
January 17, 20197 yr Popular Post 8 hours ago, Stick486 said: cursor on the chart... left click... Oh yeah that worked fine...but the text reads...Click to Enlarge
January 17, 20197 yr Popular Post 5 hours ago, Grandpadave52 said: Oh yeah that worked fine...but the text reads...Click to Enlarge picky picky picky....
.thumb.jpg.573d1497d0675219908c85aabefd797a.jpg)
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.