April 18, 20188 yr I have had three Grizzly tools and have had problems with all of them. Yesterday, I was trying to lower the table on the drill press and the crank handle slipped. No problem, it's held in by a set screw. A metric one, of course because they apparently got a deal on them somewhere. Found the right hex wrench and just started to turn it. Pop. Case broke. Well, it's a plastic lever surrounding a steel (non-metric 1/2" diameter) collar. OK, maybe the steel collar will hold it. Set screw moves in and out just fine, but not when the collar is on the shaft. Apparently, it's stripped inside. I am not going to call Grizzly and get a $14 part and $18 shipping. I may try to re-thread an SAE set screw, failing that, Friday visit to the repair shop to find a part from another vendor. I will never buy another, even used, Grizzly.
April 18, 20188 yr Not sure it's at the same place but the crank on my Bridgewood drill press broke. Some JB Weld fixed it- so far.
April 18, 20188 yr Sorry to hear about your Grizzly problem, have read numerous complaints just like yours recently. Keith, I found that most power tools now have a mix of SAE and metric I have sets of both now thanks to HF they aren't too expensive. Also found that Lowes, Ace, HD and the local screw store supply metric screws and bolts. Also have a set of metric taps and dies too, they come in handy once in awhile. Herb Edited April 18, 20188 yr by Dadio
April 18, 20188 yr Hmmmm. Never had that happen on my HF drill press. Nor, on either of my Shopsmiths.
April 18, 20188 yr Keith, one possibility, there may be two set screws top one locks the bottom in place.
April 18, 20188 yr 4 hours ago, Gene Howe said: Hmmmm. Never had that happen on my HF drill press. Nor, on either of my Shopsmiths. Me either, go Harbor Freight!!!
April 20, 20188 yr 38 minutes ago, Cliff said: You just articulated the reason there ain't no green in my shop Or white ones, either.
April 20, 20188 yr 3 hours ago, Grandpadave52 said: There you guys go again...rubbing it in about having a dedicated shop. you say this like it's bad thing....
April 20, 20188 yr 13 hours ago, Grandpadave52 said: There you guys go again...rubbing it in about having a dedicated shop. They just have no respect, Gramps! They love to rub it in, don't they? Let's see how they would like going from a 500 sq/ft dedicated shop to 50 sq/ft in the corner of a garage. I sure do miss my; full size table saw w/outfeed table, band saw, dust collection, assembly table and workbench, dedicated tool storage, material storage rack(s)...
April 20, 20188 yr Popular Post 3 hours ago, schnewj said: They just have no respect, Gramps! They love to rub it in, don't they? Let's see how they would like going from a 500 sq/ft dedicated shop to 50 sq/ft in the corner of a garage. I sure do miss my; full size table saw w/outfeed table, band saw, dust collection, assembly table and workbench, dedicated tool storage, material storage rack(s)... Garages are for Shops, not cars. my 2 vehicles live outside, and like it. Herb
April 20, 20188 yr 6 hours ago, Gene Howe said: Dave, ya gotta have somewhere to store the tools. Oh, I do...in boxes on top of boxes which are behind other boxes, containers, totes, etc. except for the ones that are hanging behind different boxes. 14 hours ago, Stick486 said: you say this like it's bad thing.... You say tomato, I say broccoli
April 20, 20188 yr 4 hours ago, schnewj said: They just have no respect, Gramps! They love to rub it in, don't they? Yep sure do...I'm not whining though...wait a minute, I am.
April 20, 20188 yr Popular Post 4 minutes ago, Grandpadave52 said: Oh, I do...in boxes on top of boxes which are behind other boxes, containers, totes, etc. except for the ones that are hanging behind different boxes. Holy crap! I don't remember posting those tips have you been looking at my photo gallery?
April 20, 20188 yr 1 minute ago, schnewj said: Holy crap! I don't remember posting those tips have you been looking at my photo gallery? ...suppose we can get published in one of those high society WW magazines?
April 20, 20188 yr Popular Post Just now, Grandpadave52 said: ...suppose we can get published in one of those high society WW magazines? Ah, NO! They're too GOOD for the likes of us. We're just peons in their eyes. My revenge is coming, I'm patient, AND I have a long memory...sooner or later I'll get my shop back. Just a series of unfortunate circumstances; job ended, marriage ended, and my mother's health went south. My ex did everything she could to drain my woodworking budget. I finally told her that it was obvious I'd finally get a completed shop when "Pigs fly". So, for now I'm patient, when my mother is gone, so am I (from Florida). I'll move and build my shop where I want to live, and on the roof will be a weather vane of a flying pig. My ex (if her bad heart holds out) will get some nice pictures of my shop and a close up picture of a flying pig on the roof...she'll get the message from just the photos.
April 20, 20188 yr Popular Post Schnewj. “All people bring joy! Some by arriving, some by leaving”. Mark Twain. He was a right smart feller.
April 20, 20188 yr Popular Post 1 hour ago, schnewj said: and on the roof will be a weather vane of a flying pig. My ex (if her bad heart holds out) will get some nice pictures of my shop and a close up picture of a flying pig on the roof. SNORK!! SNORK!! Stop it! Stop it...I beg of you to stop now...It's obvious you do not realize the pain hot coffee rapidly discharging from nasal cavities can inflict late in the afternoon.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.