February 7, 20187 yr Popular Post Grand Prize We are proud to offer a Woodriver No. 63 Low Angle Jack Plane to this months "What's It" winner. This months "What's It" is sponsored by our supporter Woodcraft Supply. Originally advertised as a plane for heavy stock removal across the grain, the No. 62 has found a home as a smoother and is quite popular among collectors. The WoodRiver® No. 62 is faithful to the original design, but is almost a full pound heavier at approximately 4.6 lbs. It features a body cast from ductile iron, with a bed angle of 12°, a bubinga tote and front knob, and a high-carbon steel blade with a 25° bevel. The plane measures a little less than 14" in length x 2-7/16" in width and has a 2"-wide blade. (Value $205.00) "What's It" Basic Rules Reminder (For a full run down on this project and rules please go to: "The Patriot Woodworker and MWTCA "What's It" project") Only Patriot Woodworker Members are eligible to participate and receive the award. The MWTCA only accepts a verified source to support your answer, so one should be submitted with your answer, such as a patent, catalog entry, tool book reference, or a respectable website on the subject. Do not let these requirements prevent you from having fun and submitting educated answers on the subject without verification, we can worry about references later. All answers are welcome, as well as healthy debates regarding "What's It". If a verified and referenced answer is not arrived at by the end of each month's "What's It" project, a random draw will be performed for a "One Year MWTCA Club Membership". Only Patriot Woodworker's who participate in this "What's It" topic will be included in the random draw. Ok ladies and gentlemen, we now have our February "What's it" live and ready! The image(s) below is a MWTCA "What's It" image for you to research, and tell us all here in this topic post, just what the heck is it! Project details No further information provided, what you see, is what you have. Remember, "What's It" is not always woodworking related!
February 8, 20187 yr @schnewj said: ..by the way...thanks for all of the congratulatory posts...now, where is this months tool... Sunday @John Morris said: Coming up Bill!
February 8, 20187 yr @p_toad I greatly appreciate the nudge. Hey, I think we found our new MWTCA Forum host!
February 8, 20187 yr saddle maker's single line lacing threader... straight blade.. insert tool through a hole.. insert the end of your cord/lace into the tool and draw the tool back through the hole... this threads the cord/lace though the hole.. commonly used to make laddered lacing... http://www.fineleatherworking.com/saddlemaker-tools saddle maker's lacing tool... hooked tool... used to make draw loops w/ leather lacing.. push the tool through the/a hole in the leather.. lay the cord/lace in the hook... pull the lace back thorough the hole forming a loop... https://www.stecksstore.com/finished-lace/ Edited February 8, 20187 yr by Stick486
February 8, 20187 yr They are used in molding to create certain features. You only show two but a complete set is a whole herd. A lot of them are hand made for doing a particular mark or design. Preston
February 8, 20187 yr 6 minutes ago, Chips N Dust said: Lobotomy tools for a surgeon Far too large for brain surgery! John
February 8, 20187 yr Caning tools: http://www.diyupholsterysupply.com/424-S.html http://www.diyupholsterysupply.com/424-B/CaningTools.html http://www.diyupholsterysupply.com/405-18/CaningTools.html Just some examples, they come in all kinds of basic shapes/quality.
February 8, 20187 yr 1 minute ago, schnewj said: Caning tools: http://www.diyupholsterysupply.com/424-S.html http://www.diyupholsterysupply.com/424-B/CaningTools.html http://www.diyupholsterysupply.com/405-18/CaningTools.html Just some examples, they come in all kinds of basic shapes/quality. That's pretty compelling Bill, now the next step in verification? Perhaps contact the pros via email with this topic link in it, and ask them for their opinion? We always get a ton of great ideas with these MWTCA projects, but you guys never go the next step, verification!
February 8, 20187 yr Those tools were used for glass removal and installation back when windows were held in with rubber gaskets. I used similar tools myself replacing windows in heavy equipment but back then we didn't take many pictures. The tools have taken on a high polish from being dragged through the rubber seal. They came along with stronger thinner tools and these were obsolete. Eventually a lock bead gasket came out which made more room and the glass was easier to get in place and this tool came out to insert the bead. Dish soap was used as a lubricant. Edited February 8, 20187 yr by HandyDan
February 8, 20187 yr 8 minutes ago, HARO50 said: FWIW, this one is actually a cotter pin puller. John I guess it could be used for that https://www.ebay.com/p/CRL-General-Purpose-Windshield-and-Back-Glass-Rubber-Installation-Tool/1840237888?iid=191832947690
February 8, 20187 yr Got one of these in a Craftsman screwdriver set back in the 70's. They called it a cotter pin tool. Possibly one of the first "Multi-Purpose" tools? John
February 8, 20187 yr 7 hours ago, Gene Howe said: First glance, those are rug weaving tools. Second glance, they're not. Trying squinting with one or both eyes.
February 8, 20187 yr Still drives me nuts folks want help to identify something but unwilling to give more than one picture. You would think he might have separated the two, placed them side by side, used some type of scale to indicate dimensions... Seems they want to know as long as they don't have to put forth any effort and that 1/1,000,000,000 shot somebody is still using a set of these. Bottom tool has "US????" on handle...maybe nothing more than USA...who knows what markings if any upper tool may have. Guess we'll never know... End of...
Join the conversation
You are posting as a guest. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.