Dear folks, help us raise funding for our community directly. And in the process you'll have a chance to win some terrific tools donated by our sponsors! Read More...
Search the Community
Showing results for tags 'mahogony'.
Found 2 results
I have taken on a project that has taken on a life of its own and I need to throw a question out there. Bear with me as I explain what I have. I'm adding three roll out shelves to a custom made mahogany credenza. There is currently one lower roll out shelf so I'm adding three more. The door is on the far left side of the unit and the door attaches to the far left side of the credenza. The credenza is made from a wood core with South American Mahogany Veneer. Because the shelf needs pass by the open door there needs to be (3) 1 x 3 x 19" spacer boards attached to the wall of the credenza to screw the shelf slides to. Herein lies the problem. Aattaching the spacer boards.The side wall of the credenza is 3/4" thick so I have to be very careful not to drill the pilot holes through the side wall or dimple the veneer so the deepest I can screw into the side wall is 1/2". I would like to apply adhesive to help bond the spacer boards to the wall. What kind of strong adhesive should I use? Help!! Here are 2 photos. The one with the door shows the door, the current shelf and the spacer board. The other picture shows the current shelf.