Friday again folks,

Guess I'll give @Grandpadave52 a break from the extra duties I piled on him while I was to busy/pooped to turn on the computer.

Waiting for the weather to warm up a bit so we can figure out why the brakes went out on the plow Blazer. Currently 11 with a wind chill of -1 here.

So while we sit here "Two Weeks From Anywhere" waiting for a thaw,

 

What's on Your Weekend Agenda? 

I got an order for a sideboard.....from another person in our house. o I'll be checking my lumber stash to see what's available, and trying to work out some details. I'm supposed to emulate an existing POS sideboard we have in the house at the moment. Might try to futz around on the lathe a little tinkering with Christmas ornaments. Amonst all of this I'll work on a nap or two and psych myself up for my once-weekly donut on Sunday morning. 

Hope to get back to shop reorganization after a couple days putting together a new dust collector. Need to grab some more 2x4 to build a new wood storage rack as I as short with what I have on hand. Currently I'm using the "lean against the wall" method. This is my most recent sketch.

This will be for longer boards and then some tool storage on the "shelves." Will add leftover OSB for backing. Debating on making it a bit larger to put bins with my sorted cutoffs on the shelf area rather than tools. Will see what works best on the space I have.

 

 

Anybody seen the Sun? 

 

 

2 minutes ago, Larry Buskirk said:

Anybody seen the Sun? 

 

 

It was out here all day yesterday, and so far this morning it's been quite bright.

1 hour ago, Fred W. Hargis Jr said:

It was out here all day yesterday, and so far this morning it's been quite bright.

It was here most of yesterday which made that 15 degree high feel not so bad. 20 so far today but no showing of the Sun, feels much colder than yesterday. 

Will try to get a table Varnished this weekend...

 

got down to 8 above 0 last night.....looking out the windows behind the computer desk, and seeing 4' long icicles hanging from the Neighbor's roof...

Busy week but no significant accomplishments. The snowpack and cold just makes everything 2x more difficult to accomplish much plus the motivator is hard starting in this kind of weather. Contemplating running some errands this afternoon.

 

Weekend; youngest grandson has a 6th grade basketball tournament tomorrow; first game at 9A; at least it's at his school; so far they are undefeated; his travel team has two games Sunday afternoon at our county seat high school; they also are undefeated so far this year.

 

A football game in Indianapolis at Lucas Oil Stadium tomorrow night that's getting a lot of publicity might "peek" my curiosity.😉. Sunday school + church Sunday morning.

 

Winter shop rules remain in force as does the search for that perfect grail, holiday, circular pastry.

5 hours ago, Larry Buskirk said:

Guess I'll give @Grandpadave52 a break from the extra duties I piled on him

Thanks. I was beginning to think the weekend would never arrive.

Just now, Grandpadave52 said:

Thanks. I was beginning to think the weekend would never arrive.

Weekend? 

2 hours ago, Larry Buskirk said:

Anybody seen the Sun? 

 

 

We finally received our December allocation yesterday. Getting partial payment today. It sounds like the weekend show has been canceled.

3 hours ago, BB1 said:

Hope to get back to shop reorganization after a couple days putting together a new dust collector. Need to grab some more 2x4 to build a new wood storage rack as I as short with what I have on hand. Currently I'm using the "lean against the wall" method. This is my most recent sketch.

This will be for longer boards and then some tool storage on the "shelves." Will add leftover OSB for backing. Debating on making it a bit larger to put bins with my sorted cutoffs on the shelf area rather than tools. Will see what works best on the space I have.

 

 

 

Not sure how your new shop is constructed. I'm in my basement and needed lumber storage. Somewhere I came across the idea to make a lumber rack. It is completely customizable. I built mine out of 2x4's and it goes from the floor to the ceiling. The tops of the posts are tied into the ceiling joist- which are actually the floor joist of the house main floor. The lumber supports are angled up at about 5°. Spacing between the lumber supports and between the vertical uprights is what ever suits your environment and needs.

 

 

Here's an idea for the cart

 

If you use Sketchup, I have several drawings for the cart.

 

3 hours ago, BB1 said:

Currently I'm using the "lean against the wall" method. This is my most recent sketch.

That's a lot of math to lean stuff against the wall.   However it might explain a few things...I need to do some recalculations. 

Waiting around on Varnish, at the Moment...

once this dries, then I can varnish the top of the table...

1 hour ago, Grandpadave52 said:

We finally received our December allocation yesterday. Getting partial payment today. It sounds like the weekend show has been canceled.

We must have also, wait a minute I think it's peaking out now, guess not supposed to get 3-5" of new snow tomorrow night into Sunday now.

Guess we'll have to replace that master cylinder in the morning unless Bruce decides to do it yet today. 

Had an interesting day yesterday.  There was a local business that does a 'charity day' every year.  The company treats them to lunch, then they do a project in the afternoon.  This is a small company with about 40 people  in the factory.  they bought two pallets of RTA furniture (a dresser and a nightstand) and had their employees assemble them coached by 3 of us from the furniture bank.   Problem was, only about 4 of them spoke English.   About 80% of the staff was female,  that was  not a problem, but trying  to explain directions got a little funny.

Want to get my air scrubber up on the ceiling. I got the brackets, eye bolts and chains in place. Time to recruit my bride to assist me getting it hung. It only weighs 35# so there is that. 
 

Then I’m going to remeasure my widows and cut some trim.  Planning on assembling it in the shop and bring it in to put up.  What can go wrong right? Was it 78 1/2” or 87 1/2”? Thanks to @Grandpadave52 I’m laughing. 🤣 

Spent this past week setting out decorations for the holidays, I'm the laborer on this crew. The tree goes up today & decorated tomorrow; the Sunday coffee club will take care of that. Patti starts her baking next week & I hide until I'm called for, sometimes for a sampling, it's a dirty job but I'm happy to step up.

I'm kind of curious what's going to happen in Indiana as well. Go Buckeyes!

 2-4" or 4-6" forecast for this evening. I'm hoping for 0". 

We laughed as the outfeed table isn’t quite as steady as I thought when you get to the long edge. But after a woah or two we got it. After lunch I will get the last filter installed and run it.  I will do a post on it later on.