KevTN Posted March 7, 2023 Report Posted March 7, 2023 Ordered my CNC today. Went with a Millright Carve King 2. I am going to use Ventric Desktop for software. Paul thank you for all the input on the SO I am still wanting to get one. MillRight CNC Carve King 2 Kit Bundle | Affordable CNC Machines MILLRIGHTCNC.COM MillRight CNC Carve King Kit Bundle is the new standard for affordable CNC machines. With thoughtful design elements, it outperforms the competition. Artie, 4DThinker, Cal and 1 other 4 Quote
4DThinker Posted March 7, 2023 Report Posted March 7, 2023 I had to look up the Millright CNC. Hard to tell from the images but check for front to back flex when you get it. I'm suspicious of the thin corner uprights. CNCs can generate considerable sideways force as the bit plows through hardwoods, and any flex in the frame will show up as chatter of the bit and/or imperfect results due to the deflection. I'll also recommend you set the speed dial on the router to 5 rather than it's max. Often the bearings used on these routers aren't design to run continuously at the top speed of the router. Used on a CNC where the router may be running for a couple hours on a 3D carve you don't want bearings to fail. All the CNCs I've used and overseen used routers, and I set them all one under their top speed setting. I did have to replace brushes a few times, but never lost a router to bad bearings. 4D Artie, Cal, Grandpadave52 and 1 other 4 Quote
Grandpadave52 Posted March 7, 2023 Report Posted March 7, 2023 4 hours ago, KevTN said: Ordered my CNC today. Went with a Millright Carve King 2. I am going to use Ventric Desktop for software. Congrats Kevin. Glad we could help you spend your money. Of course you know the drill? Pictures (when it's delivered) or it didn't happen Larry Buskirk, Cal and Artie 2 1 Quote
Fred W. Hargis Jr Posted March 7, 2023 Report Posted March 7, 2023 Looking forward to seeing your reports on the machine, congrats! Grandpadave52, Artie, Larry Buskirk and 1 other 4 Quote
honesttjohn Posted March 7, 2023 Report Posted March 7, 2023 1st step. Yay. Once you start you'll wish you got a bigger one. Lol Grandpadave52, Cal, 4DThinker and 1 other 4 Quote
4DThinker Posted March 7, 2023 Report Posted March 7, 2023 7 hours ago, honesttjohn said: 1st step. Yay. Once you start you'll wish you got a bigger one. Lol Generally very true, and sometimes the step up to a larger model reveals much more you can do besides just larger flat projects. This also applies to the software you use. I started with VCarve (when there was only one version) as it came with my first CNC, and relied on outside sources for 3D models to carve. When I moved up to Aspire (for the difference in initial price between the versions) I could create my own 3D models, as well as export those models to .STL files that I could 3D print. Quite by accident the second machine I ordered held the potential to open up the bed and clamp parts vertically or at any angle below the spindle. The makers of the machine had not yet realized this potential until I pointed it out to them and they started to include it in their specs. https://4dfurniture.blogspot.com/2016/04/advanced-compound-angle-cnc-clamping.html honesttjohn, Grandpadave52, Cal and 1 other 4 Quote
KevTN Posted March 8, 2023 Author Report Posted March 8, 2023 On 3/6/2023 at 8:49 PM, 4DThinker said: I had to look up the Millright CNC. Hard to tell from the images but check for front to back flex when you get it. I'm suspicious of the thin corner uprights. CNCs can generate considerable sideways force as the bit plows through hardwoods, and any flex in the frame will show up as chatter of the bit and/or imperfect results due to the deflection. I'll also recommend you set the speed dial on the router to 5 rather than it's max. Often the bearings used on these routers aren't design to run continuously at the top speed of the router. Used on a CNC where the router may be running for a couple hours on a 3D carve you don't want bearings to fail. All the CNCs I've used and overseen used routers, and I set them all one under their top speed setting. I did have to replace brushes a few times, but never lost a router to bad bearings. 4D Thank you for the tips Cal, Grandpadave52 and Artie 3 Quote
KevTN Posted March 8, 2023 Author Report Posted March 8, 2023 23 hours ago, Grandpadave52 said: Congrats Kevin. Glad we could help you spend your money. Of course you know the drill? Pictures (when it's delivered) or it didn't happen Yes sir! I'm also cheating a bit too. Because I am rarely home this time of the year (Work travel M-TH then college softball travel Fri-Sun) I paid for them to do the majority of the assembly for me. I just do not have 8-10 hours to put it together. Grandpadave52, Artie and Cal 3 Quote
KevTN Posted March 8, 2023 Author Report Posted March 8, 2023 16 hours ago, Fred W. Hargis Jr said: Looking forward to seeing your reports on the machine, congrats! Thank you Fred I am looking forward to getting to know this type of wood working. Grandpadave52, Cal and Artie 3 Quote
KevTN Posted March 8, 2023 Author Report Posted March 8, 2023 13 hours ago, honesttjohn said: 1st step. Yay. Once you start you'll wish you got a bigger one. Lol Well until I get a bigger space I am out of room. I am still trying to figure out where to put this one! Cal, Artie and Grandpadave52 3 Quote
honesttjohn Posted March 8, 2023 Report Posted March 8, 2023 Fred - - you can get on this too quite reasonable with my Probotix. LOL Just saying...... Artie, Cal, KevTN and 1 other 4 Quote
KevTN Posted March 8, 2023 Author Report Posted March 8, 2023 6 hours ago, 4DThinker said: Generally very true, and sometimes the step up to a larger model reveals much more you can do besides just larger flat projects. This also applies to the software you use. I started with VCarve (when there was only one version) as it came with my first CNC, and relied on outside sources for 3D models to carve. When I moved up to Aspire (for the difference in initial price between the versions) I could create my own 3D models, as well as export those models to .STL files that I could 3D print. Quite by accident the second machine I ordered held the potential to open up the bed and clamp parts vertically or at any angle below the spindle. The makers of the machine had not yet realized this potential until I pointed it out to them and they started to include it in their specs. https://4dfurniture.blogspot.com/2016/04/advanced-compound-angle-cnc-clamping.html Are you talking about Tiling? At some point I know I will need to learn how to do that. Artie, Grandpadave52 and Cal 3 Quote
4DThinker Posted March 8, 2023 Report Posted March 8, 2023 7 hours ago, KevTN said: Are you talking about Tiling? At some point I know I will need to learn how to do that. Tiling is just dividing a large project into sections you can cut within the limits of your CNC, slide the work then cut the next tile section, and so on. I taught furniture design to college kids, and what I was talking about was being able to cut joinery and slots and complex details on furniture by opening up the bed of the CNC, mounting it on an open frame (with no top), and being able to clamp parts at just about any angle within the space below. Cal, Grandpadave52 and Artie 3 Quote
Cal Posted March 8, 2023 Report Posted March 8, 2023 Exciting stuff Kevin! What sorts of projects do you want to do with it? Grandpadave52 1 Quote
KevTN Posted March 8, 2023 Author Report Posted March 8, 2023 Ahhh. Okay thank you. I have a lot to learn lol Cal and Grandpadave52 2 Quote
KevTN Posted March 8, 2023 Author Report Posted March 8, 2023 1 minute ago, Cal said: Exciting stuff Kevin! What sorts of projects do you want to do with it? Signs, bowls. Maybe try to come up with a little side hustle with little projects mostly have fun. I was playing with the software the other night and came up with this little catch all of the mascot for my daughters college. Artie, Cal, Larry Buskirk and 1 other 4 Quote
4DThinker Posted March 8, 2023 Report Posted March 8, 2023 Just be warned that selling work with trademarked/copyrighted images on it may get you attention you don't want. That is unless you've licen$ed the right to do that from the source. 4D Artie, Grandpadave52, Cal and 1 other 4 Quote
Popular Post KevTN Posted March 9, 2023 Author Popular Post Report Posted March 9, 2023 a couple of more that I did tonight. The boat I am thinking putting some epoxy to "try" to highlight the detail. The other is for my daughter who will begin working on her Doctorate in PT starting in May... Fred W. Hargis Jr, Larry Buskirk, Artie and 4 others 6 1 Quote
KevTN Posted March 18, 2023 Author Report Posted March 18, 2023 Nothing like being out of town and your father texts. ‘That thing is here’ and you won’t be able to pick it up until later Monday Headhunter, honesttjohn, Artie and 2 others 1 4 Quote
Popular Post 4DThinker Posted March 18, 2023 Popular Post Report Posted March 18, 2023 3 hours ago, KevTN said: Nothing like being out of town and your father texts. ‘That thing is here’ and you won’t be able to pick it up until later Monday That's like being told on Christmas day that Santa got held up and your presents won't be here until New Years day. I feel your pain, 4D KevTN, Cal, Grandpadave52 and 2 others 3 1 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.