March 15, 20233 yr Author Popular Post comment_310693 My Starlink has been down for a month now and I have to use the phone to connect to the internet... took a while to sort that out and also to find out that unlimited data on my phone is actually somewhat limited after 15Gb. So I'll update this thread with photos when I get my Starlink back online. Starlink went down and after figuring out how to create a "ticket" and waiting a few weeks for a new "kit" it worked once... they sent me a new cable and modem and the modem has been in Memphis since the 2nd and the replacement modem for the replacement modem is due to ship 3-20 to 3-26. While trying to figure out some way to have internet on my LAN I managed to screw up my dev PC where I do programming in the morning with my coffee... finally figured out to install Debian I needed the router to be online with the PC. Dizzy Bowl #2 is in progress and I learned a lot with #1. I made a circle cutting jig for the band saw and it worked perfect. The 1/4" Timber Wolf blade did not like a radius under 3", does anyone know of a bandsaw blade that cuts a smaller radius? JT Report
March 15, 20233 yr comment_310736 6 hours ago, jthornton said: My Starlink has been down for a month now I was wondering where ya went! Report
March 15, 20233 yr comment_310741 Woodcraft has some 3/16" wide blades that might do the trick- https://www.woodcraft.com/search?q=bandsaw+blades+3%2F16&button=search Report
March 15, 20233 yr Popular Post comment_310747 The people with Ring master attachments were big into the dizzy bowls and were adept at cutting rings. Here is a video by Bill Bulloch. He has done many dizzy bowls. Report
March 16, 20233 yr Author comment_310769 I think I found the problem, the center of the circle was not exactly even with the teeth of the blade. I dug up the box and it claims that blade can cut a 5/8" radius! JT Report
March 16, 20233 yr comment_310785 1 hour ago, jthornton said: I think I found the problem, the center of the circle was not exactly even with the teeth of the blade. I dug up the box and it claims that blade can cut a 5/8" radius! JT Glad you got it figgered out. Sure caused some head scratching. Report
April 26, 20233 yr Author Popular Post comment_313097 Internet was down for a month then busy as can be and to top it off a PC died and had to sort that out... I'm actually working on Dizzy Bowl II now but I'll finish up this thread with photos of Dizzy Bowl I. JT Report
April 26, 20233 yr Author comment_313113 More to come tomorrow... it really shines with the finish on. JT Report
April 26, 20233 yr comment_313114 17 minutes ago, jthornton said: More to come tomorrow... it really shines with the finish on. JT Anxiously awaiting to see it with the finish. Report
April 28, 20233 yr Author Popular Post comment_313189 Finished sanding and burnishing with wood shavings... no finish on the wood yet. First coat of Tried & True varnish oil. The finished bowl with two coats of T&T varnish oil. JT Report
May 1, 20233 yr comment_313380 Nice. I don’t know anything about turning, but i’m surprised you used pine. I would have thought that was too soft. Report
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.