Popular Post John Morris Posted February 16, 2018 Popular Post Report Posted February 16, 2018 It's Friday! Good day Patriot Woodworkers! What y'all doing this weekend an what have you planned for shop time? Also, what have you planned for life? Any topic is welcome, birthday parties, woodworking, trips, anything. So, lets hear it, plans, we want your plans! A Good Project @Dale Felice is not going to be stymied just because he doesn't have a lathe, he's going to build a bowl by golly! MWTCA "What's It" Our February "What's It" is in full bloom and we are having fun! Join us! Featured Image of the Weekend The Chief Master SGT. of the Air Force insignia hangs in the hallways of the Binnicker Professional Military Education Center at Joint Base Pearl Harbor-Hickam, Hawaii. The CMSAF is the senior enlisted member of the Air Force and takes precedence over all enlisted member while serving in the position. Attribution: (U.S. Air Force photo/Tech. Sgt. Jerome S. Tayborn) Source: http://www.15wing.af.mil/News/Article-Display/Article/376432/former-cmsaf-visits-joint-base-pearl-harbor-hickam/ HARO50, Gerald, Cal and 2 others 4 1 Quote
Stick486 Posted February 16, 2018 Report Posted February 16, 2018 @John Morris.. that is one of your better images... Quote
Allen Worsham Posted February 16, 2018 Report Posted February 16, 2018 This past week we had to replace our 50 gallon water heater in the garage. It was installed in 2001 in our new construction home so we got almost 17 years out of it. In order to replace it I had to move everything out of the way and then had a friend come by to help me lift the old unit off the platform and throw it in the back of the truck to take to the dump. Then we lifted the new water heater into place and strapped it down. So today I finally get to put everything back into place in the garage and paint the stained area around the water heater with some Kilz stain blocking paint since the drywall is fully dried after a number of days with two box fans blowing on it for a number of days. Harry Brink, Grandpadave52, Dadio and 3 others 2 4 Quote
HandyDan Posted February 16, 2018 Report Posted February 16, 2018 Got some goofing off to do. I will get into the shop. Been working on a couple prototypes for my next project. Should finish them off by Monday. Cal 1 Quote
Stick486 Posted February 16, 2018 Report Posted February 16, 2018 watch the train trip from in real time from Bergen to Oslo... that should take care of 8 hours or so... retirement has it's merits... HARO50 and Cal 1 1 Quote
Gerald Posted February 16, 2018 Report Posted February 16, 2018 Getting ready for Magnolia Woodturners meeting tomorrow. In last finish phase on 4 BOC bowls. Ain't life fun ? finish one project and start another and then spring gets in the way with all that growing stuff. Cal and HARO50 2 Quote
Grandpadave52 Posted February 16, 2018 Report Posted February 16, 2018 Cub Scout Awards Banquet and cake project auction tonight. More troubleshooting on the truck electrical, voltage specifically...2nd alternator now doing the same...research is heavily pointing to a failed voltmeter motor in the instrument cluster circuit panel...R&R is within my scope...repair nada. Rest depends on the weather and who knows...Wife's weekend for on-site facility manager. Cal, p_toad and HARO50 3 Quote
Grandpadave52 Posted February 16, 2018 Report Posted February 16, 2018 5 hours ago, John Morris said: @Dale Felice is not going to be stymied just because he doesn't have a lathe, he's going to build a bowl by golly! @Dale Felice doesn't post much in the regular forum threads but does some amazing work which he frequently shares in the Gallery section. I would encourage everyone to check out his (and others) gallery posts. Some beautiful and creative works you might be missing. p_toad, HARO50 and Cal 2 1 Quote
Stick486 Posted February 16, 2018 Report Posted February 16, 2018 (edited) made it to Vickersund... another 1½hours to Oslo.. Edited February 16, 2018 by Stick486 HARO50, Grandpadave52, Cal and 1 other 1 1 2 Quote
Grandpadave52 Posted February 16, 2018 Report Posted February 16, 2018 19 minutes ago, Stick486 said: made it to Vickersund... another 1½hours to Oslo.. Food car serving? HARO50 and Cal 2 Quote
Stick486 Posted February 16, 2018 Report Posted February 16, 2018 3 minutes ago, Grandpadave52 said: Food car serving? yup... it's called a Cafe on the train.. the Calzone is next level.. .. p_toad, Cal and HARO50 2 1 Quote
Grandpadave52 Posted February 16, 2018 Report Posted February 16, 2018 13 minutes ago, Stick486 said: the Calzone is next level Aahh, a good Italian sausage, spinach, ricotta, mozzarella, red onion, green & red bell pepper, banana pepper stuffed calzone sounds good about now. HARO50, Cal and Stick486 3 Quote
p_toad Posted February 16, 2018 Report Posted February 16, 2018 Little bit of Restore on Saturday. Neighbor asked me to see if they had any brick mold sets (there were some, but who knows?). I need another one myself so i hope they're still there. Need to get more pictures of that rocker. Turned out i didn't have to do any glue work on the base, only the top. Cal and Grandpadave52 2 Quote
Stick486 Posted February 16, 2018 Report Posted February 16, 2018 33 minutes ago, Grandpadave52 said: Aahh, a good Italian sausage, spinach, ricotta, mozzarella, red onion, green & red bell pepper, banana pepper stuffed calzone sounds good about now. hold the spinach.. Cal 1 Quote
Ron Dudelston Posted February 16, 2018 Report Posted February 16, 2018 Saturday project is put shelf pin sleeves in my grandson's bookcase and deliver it. Sunday... Worship and loaf. In that order. Grandpadave52, p_toad and Cal 3 Quote
Al B Posted February 17, 2018 Report Posted February 17, 2018 For now, I'm planning to make plans, for hopefully, making something in the shop. Grandpadave52, Cal and p_toad 3 Quote
Ron Dudelston Posted February 17, 2018 Report Posted February 17, 2018 I just got my Saturday schedule changed. Our Sunday School teacher is ill and I got drafted to teach about worrying and the Kingdom of God. Matthew 6. p_toad, Cal, Grandpadave52 and 1 other 3 1 Quote
Grandpadave52 Posted February 17, 2018 Report Posted February 17, 2018 20 minutes ago, Ron Dudelston said: to teach about worrying and the Kingdom of God. Matthew 6 Read Matthew 6...then don't worry about the teaching part. Ron Dudelston, HARO50, Cal and 1 other 2 1 1 Quote
Popular Post Fred W. Hargis Jr Posted February 17, 2018 Popular Post Report Posted February 17, 2018 I now find myself getting some shop time in. although it's still setting things up. So I was able to gte my DC bracket built and on the wall, next comes assembly of the DC itself, then hang it. It's really nice to be in the shop again. Al B, Grandpadave52, Cal and 4 others 7 Quote
.thumb.jpg.573d1497d0675219908c85aabefd797a.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.