Laguna 1.5 HP Dust Cyclone (MCYC1.5MOBMC-110V-0145) Pleated Filter

[Mark Wilson]

Hi everyone 

I have a Laguna 1.5 HP Dust Cyclone (MCYC1.5MOBMC-110V-0145)dust collector. There’s no number on the filter and the manual doesn’t tell me anything about it either. Laguna doesn’t sell this model anymore. Just trying to find a replacement filter for it. The filter is 23” tall, 15” wide, , has 6” dust hose port on top , and bottom is open for clear collection bag . If anyone has an idea where to locate one I’d appreciate the help. Thanks 

[Grandpadave52]

Have you contacted Laguna Customer Service directly Mark with an inquiry about a suitable replacement? They're usually pretty responsive and helpful.

Edited December 2, 2024 by Grandpadave52

[John Morris]

Hey Mark, is it part "J" No. 58 in attached manual?

MCYC1.5MOBMC-110V-0145_Manual for UB-1000V-1.5HP 13 -03 2015.pdf

[Mark Wilson]

13 hours ago, Grandpadave52 said:

Have you contacted Laguna Customer Service directly Mark with an inquiry about a suitable replacement? They're usually pretty responsive and helpful.

I haven’t contacted them yet because it was Thanksgiving weekend and I had other things come up. I’ll have to contact them and see what they say. 

[Mark Wilson]

11 hours ago, John Morris said:

Hey Mark, is it part "J" No. 58 in attached manual?

Thanks John

I read the manual over the weekend and seen that . That number is for Laguna i think because-on the internet they think it’s a 0145 filter but everywhere I look one up it’s not the same as the I have .  So I guess I’ll have to contact Laguna. Was just trying to see if there was a cheaper alternative due to the time of the year. 

11 hours ago, John Morris said:

MCYC1.5MOBMC-110V-0145_Manual for UB-1000V-1.5HP 13 -03 2015.pdf 1.54 MB · 4 downloads

 

[John Morris]

8 minutes ago, Mark Wilson said:

That number is for Laguna i think because-on the internet they think it’s a 0145 filter but everywhere I look one up it’s not the same as the I have .

Ya I understood it's the Laguna number, I was just trying to visualize exactly what part you are referring too. There has to be a cross fit part. These machines are typically the same across the spectrum, Grizzy, Shopfox, Laguna, they basically come out of the same ISO Taiwanese factory with a different paint job and perhaps some minor modifications, Laguna's tools seem to be a cut above the rest in many regards, they have some special fitments going on, but the main structure of the machines are similar, so I bet if they don't supply that filter anymore, they'll have a cross ref for another. Let us know how it works out Mark!

And hey, we'd love some more pics of your working shop/home! Now that you are breaking it all in! 

[Gerald]

I do not remember where I got my filter but probably Wynn. At any rate here are a couple places you can call and I am Sure they will be able to meet your needs.

 

Wynn

 

AirMax