Search the Community
Showing results for tags 'laguna'.
Found 11 results
-
VetsTurn Application deadline is fast approaching. These applications need to be submitted by October 31, 2020. This video contains the information needed to apply. If you know a veteran that could benefit from this turning package, please contact them!
-
- 1
-
-
- veterans
- toolmetrix
- (and 3 more)
-
Well I'm not sure if this belongs here but...I've had on/off problems with my Laguna 14-12 since I bought it at Woodcraft in Richmond Virginia and Laguna has been contacted several times. This recent issue seems to crop up from time to time where when changing the blade is difficult to the point it won't stay on the wheels for even several hand revolutions. Last night was one of those times. I had the 1/2" blade on and went to install the 1/4". I released the tension and took the 1/2" blade off, put the 1/4" on and went to tension the blade. I turned the wheel by hand less that 2 r
-
I have a Delta 1 1/2 HP dust collector in my shop that for the most part does a good job. I have 4" PVC pipe run to all of my machines and usually only have one gate open at a time. However there are times when I have help in the shop and we are using multiple machines and just don't get enough air flow to pull on the machines. My Delta table saw is the worse of the bunch. I have the overhead guard/dust collector and pulling off the bottom but it just doesn't get the enough pull. I am thinking of going to a 3 hp to get the higher CFM's and to allow multiple machines to run at the same time
-
It's been a few months since I won the raffle, winning the $500.00 gift certificate from Laguna Tools. I've finally gotten it set up in my shop, so thought it was time to post a photo. -
.thumb.jpg.573d1497d0675219908c85aabefd797a.jpg)
VCarve Training - Basic Fri, Sep 29, 2017 2:00 PM - 4:00 PM PDT - Overview of VCarve features - Introduction to CNC - Drafting - Toolpathing - Importing 2D and 3D work - Preparing the file for your CNC - Setting up tools - Q & A Please join my meeting from your computer, tablet or smartphone. https://global.gotomeeting.com/join/365073373 You can also dial in using your phone. United States: +1 (872) 240-3212 Access Code: 365-073-373 First GoToMeeting? Try a test session: https://care.citrixonline.com/g2m/getready VCarve Training Free Sessions Dates: ( -
Did y'all see this? I think this is a good thing - two good companies. David =========================================== Laguna buys SuperMax SuperMax Tools acquired by Laguna Tools September 19, 2017 | Latest News SuperMax Tools acquired by Laguna Tools St. Paul, Minnesota – September 18th, 2017: SuperMax announces it has been acquired by Laguna Tools, Inc. Laguna Tools is an Irvine, California-based manufacturer of advanced CNC machinery and award-winning bandsaws, tablesaws, edgebanders, and other woodworking equipment. “We were looking fo
-
I was perusing the Laguna Tools CNC customer stories and came upon this pretty awesome business, they build wooden mountain bikes, here is the Laguna page at https://lagunatools.com/customer-stories/savvy-cycles-wood-on-wheels/ Link to Savvy Cycles http://www.savvy-cycles.com/bikes.html The projects you can create by CNC are vast and endless it seems, how cool is that!
- 2 replies
-
- 1
-
-
- savvy cycles
- laguna
- (and 1 more)
-
I am thinking of a better dust collection system and I noticed both Woodcraft and Laguna tools are sponsors. So how does purchasing a Laguna DC from Woodcraft improve The Patriot Wood Worker? -
From the album: Shaker Furniture
After ripping my post blank to 1 5/8" square by 45" long, I had to flatten it on the jointer, after ripping the post blank out, it stressed and bent a tad, the blank should be absolutely straight before setting it up in the lathe. -
From the album: Shaker Furniture
Soon after I had the blank in the lathe, my son walked in and I put him to work on roughing out the blank, he did a pretty nice jog for his first time. -
The Raffle is Ending, January 30th Midnight Pac Daylight Time! Start your New Year by Winning the new Laguna Revo 10|16 Mini Lathe! A $499.00 Value The Patriot Woodworker's are holding a raffle! Our raffle is ending midnight January 30th Pac Daylight Time! What a great way to start off the New Year by entering and winning the Laguna Revo 10|16 Lathe!We are holding 12 consecutive raffles for the year of 2015, with one featured woodworking tool or machine up for grabs every month of 2015 to a lucky woodworker. Purchase your Entries now by clicking on the tic
- 4 replies
-
- 2
-
-
- revo 10|16
- lathe
- (and 4 more)
.jpg.6b38c87f1c9d6bda9359515945b45693.jpg)