Yuba Sawsmith radial arm saw restoration

[Drumone]

Normally, I would just refer to my own thread about parts suppliers over on Woodworking Talk. However, I need parts for a 65 year old saw that hasn't been manufactured for 60 years. I picked up a Yuba Sawsmith RAS (circa 1959-60) last year. I didn't realize it at the time, but it's missing a number of parts that I have to have to make it functional/operational. A lot of things from years ago are no longer available. I have read through the entire thread on the Shopsmith Forum about this machine. If anyone has one of these machines that they are willing to part out OR if you see one of these machines for sale somewhere, please let me know. Any help in finding replacements is greatly appreciated. Please help!!!

Here's a list of what I am looking for (Ref. No, Part No., Description):

Mandatory - Motor-Carriage Assembly
53 - 4864 - Nut-Spindle, L.H.
87 - 27032 - 1-1/4" Arbor-Saw
13 - 2355 - Washer

Needed but not required - Motor-Carriage Assembly
54 - 4868 - Wrench-Arbor
98 - 700040 - Anti-Kickback Assembly
Rubber boot that covers the unused side of the arbor shaft

Mandatory - Base, Column, Arm and Table
23 - 4694 - Wire-Coiled
24 - 4698 - Wire-Main, with Plug
76 - 700048 - Lock Assembly-With Key (My key is stuck in the on position and won't turn. The key is also partially broken.)

Needed but not required - Base, Column, Arm and Table
80 - 700057 - Switch Assembly (I'm missing the plastic "Start" button, but the switch itself works.)

I'm also curious if anyone knows whether or not a more recent (or past) SHOPsmith arbor w/ the set screw will work with the old RAS? Thanks for your thoughts and input!

[lew]

@Larry Buskirk should be along shortly with some information

[Grandpadave52]

13 hours ago, Drumone said:

Normally, I would just refer to my own thread about parts suppliers over on Woodworking Talk.

First, welcome to The Patriot Woodworker. Glad you ventured over and found us. Several SS users here including our "boss" @John Morris. Cool score on your part.

 

I'll state the probably obvious solutions which likely you've already researched; searches on Craigslist as well as Facebook Market Place. Perhaps place a "Wanted" on those sites.

 

No doubt you've already located THIS listing as well but thought I'd link just in case. Aside from this, can't be much assistance. Good luck on your search. Hope you'll keep the thread alive as well as join us on a regular basis.

[Larry Buskirk]

4 hours ago, lew said:

@Larry Buskirk should be along shortly with some information

 

Hate to say it Lew, but I'm not that up on the SS stuff. 

[Drumone]

I've officially given up on this machine. It's listed for parts here, FB Marketplace, and other places. I already have some interest in a few parts. I hope to break even on what I paid for it.

[Fred W. Hargis Jr]

It's a fairly rare tool. I saw it mentioned once or twice (at lost) over at the Dewalt Radial Arm saw forum (devoted to the RAS of all makes) but never much said about them.