-
Latin (group) name: Pinus
-
Latin (specific) name: Pinus Contortata Var. Latifolia Englemann
-
Average max height: 60' to 150'
-
Average diameter: 12" to 36"
-
Associated state: none
The Tree
The Lodgepole Pine is a straight tree from 60 to 150 feet tall and 12 to 86 inches in diameter, and grows from low elevations in the north up to 11,500 feet in the south. It is typically a Northern Rocky Mountain pine. For a long time this tree was rated very low as a timber tree because of its knotty lumber and the rather poor quality of the wood. It grows in dense stands of tall straight trees. The bark is a quarter of an inch thick, a pale brown or grayish color with many thin irregular scales. The bright yellowish-green needles, usually about two inches long, grow in pairs.
The shiny light yellowish-brown to dark brown cones up to two inches long, frequently grow in clusters. The cone scales have a sharp prickle. Some of the cones open at maturity, while others remain on the tree for several years before opening to release the seed. Because of the dense stands of the tree, serious damage is done to it by forest fires. The tree also suffers great damage from mistletoe and fungi, bark beetles, and porcupines.
Common Names in Use
Lodgepole Pine (Wyo., Wash., Mont., Idaho., Colo.)
Prickly Pine (Utah)
Sand Pine (Oreg)
Birdseye Pine (Idaho., Wyo.)
Scrub Pine
Black Pine (Wyo., Mont.)
Shore Pine (lit)
Bolander’s Pine
Spruce Pine (Colo., Idaho., Mont.)
Henderson’s Pine
Tamarack Pine (Calif., Wash.)
Jack Pine (Colo.)
Tamarack (Wyo., Utah., Mont., Calif., and trade)
Knotty Pine
Murray Pine (Calif., lit.)
Twisted Pine (Eastern States)
North Coast Scrub Pine (Calif., lit.)
White Pine (Mont., Colo.)
Fox Tail Pine (left), Lodgepole Pine (right)
![]()
Lodgepole Pine Cone
![]()
Growth Range
The growth range of Lodgepole Pine is from southern Alaska, western Canada southward through Washington, Oregon and California and eastward into most of the Rocky Mountain region as far south as New Mexico and northern Utah.
![]()
The Wood
The heartwood varies in color from a light yellow to a creamy yellowish light brown-tan sometimes having a reddish tinge, while the sapwood is narrow and nearly white. The wood is moderately hard, stiff, straight grained, medium fine-textured, and brittle. It contains numerous fine resin ducts which exude resin. It is easy to work, glues well and holds paint reasonably well. The tangential surfaces frequently have a “dimpled” or pebbled appearance resembling “bird’s-eye” because of which it is sometimes called Bird’s-eye Pine.
Lodgepole Pine wood

Bibliography
Shelley E. Schoonover (American Woods) 1951 (Watling & Co. ) Santa Monica, CA