Dadio Posted June 3, 2018 Report Posted June 3, 2018 Well here we go again. new set of Drawers for my Jessem Router table. Stick486, lew, Grandpadave52 and 1 other 3 1 Quote
Dadio Posted June 3, 2018 Author Report Posted June 3, 2018 When I tried to put the box into the table it hit the router lift. So I cut the top out of the box and then it was too low when I got it in place., I had to turn the fron angle over to get it to slide in Stick486 and HARO50 2 Quote
Dadio Posted June 3, 2018 Author Report Posted June 3, 2018 Then when I got the lower two shelves built, I realised that the top shelf was too narrow for the router bits, so I knocked off the top and sxtended it up 1 1/2" HARO50, Stick486 and Grandpadave52 3 Quote
Popular Post Dadio Posted June 3, 2018 Author Popular Post Report Posted June 3, 2018 Then I found that it still wasn't deep enough to close so drilled holes thru the bottom of the drawers for the shanks, and only half of them would fit , so ended up abandoning that idea and used the second drawer down for the bits. Stick486, HARO50, Grandpadave52 and 2 others 5 Quote
Stick486 Posted June 3, 2018 Report Posted June 3, 2018 sure do see a lot of ''stuff'' that didn't come from HF Herb... they know you aren't the loyal fan they think you are??? other than that... nice job and execution ... Dadio, HARO50, Grandpadave52 and 1 other 1 1 2 Quote
Joeb41 Posted June 3, 2018 Report Posted June 3, 2018 Great storage! Excellent design and workmanship. Dadio 1 Quote
HandyDan Posted June 3, 2018 Report Posted June 3, 2018 Nice Herb. More storage more stuff. Dadio 1 Quote
schnewj Posted June 3, 2018 Report Posted June 3, 2018 Herb, Herb, Herb! I'm disappointed in you. You took a perfectly acceptable shelf of tools, where you knew EXACTLY were everything was, and organized them into drawers. Now, you know that you won't be able to find anything now! You'll be opening all of the drawers hunting for where you ORGANIZED the item. What a waste of precious shop time. I think that you just wanted a busy project. In addition, you just wanted to show off your outstanding skills with that beautiful cabinet. Shame on you. Cal, Dadio, Grandpadave52 and 1 other 2 2 Quote
Dadio Posted June 3, 2018 Author Report Posted June 3, 2018 You are right about finding them again. I sure like your "Smilies", Do you make them or have a source to import them? just curious, you come up with the Koolest ones. Herb Grandpadave52 1 Quote
Popular Post Grandpadave52 Posted June 3, 2018 Popular Post Report Posted June 3, 2018 12 hours ago, Dadio said: new set of Drawers I really need some too...the elastic in the waste-band has gone bad.... Oh, I see the pictures now...never mind... HARO50, Gerald, Bdavep and 2 others 5 Quote
Grandpadave52 Posted June 3, 2018 Report Posted June 3, 2018 Ya' outdid yourself yet again...really classed the stand up...looks great... I like the cedar bit holders too...wonder if it will help keep the surface rust at bay??? Quote
Dadio Posted June 3, 2018 Author Report Posted June 3, 2018 43 minutes ago, Grandpadave52 said: Ya' outdid yourself yet again...really classed the stand up...looks great... I like the cedar bit holders too...wonder if it will help keep the surface rust at bay??? I don't know,we don't have humidity problems here like some areas do. Never had a tool rust inside, only if left out in the rain. I use the cedar because I like to work with it and it smells good and the color sets off good. Herb Cal and Grandpadave52 2 Quote
Gerald Posted June 4, 2018 Report Posted June 4, 2018 Good save on the alterations and since it cannot be seen we will never tell Love the setup and those wheels look nice on that platform . Dadio 1 Quote
Dadio Posted June 4, 2018 Author Report Posted June 4, 2018 1 hour ago, Gerald said: Good save on the alterations and since it cannot be seen we will never tell Love the setup and those wheels look nice on that platform . I put most of my tools on dollys,that way I can reposition them easier. When I first tried it I put swivel castors on the 4 corners, but didn't like that as well as 2 swivel and 2 fixed. Herb Cal 1 Quote
HARO50 Posted June 4, 2018 Report Posted June 4, 2018 On 6/3/2018 at 1:22 PM, Grandpadave52 said: I really need some too...the elastic in the waste-band has gone bad.... Oh, I see the pictures now...never mind... Great minds, and all that... When I saw the heading, I thought Herb had had a kick-back on the table saw, or some such! But seriously, Herb, NICE WORK! All your tool cabinets look good enough to put in the living room. Mine just look like... well, tool cabinets. John Dadio and Grandpadave52 1 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.