Search the Community
Showing results for tags 'manual'.
-
-
View File Rustic Carpentry Editor: Hasluck, Paul N. (Paul Nooncree), 1854-1931 Title: Rustic Carpentry Contents: Light rustic work -- Flower stands, vases, etc. -- Tables -- Chairs and seats -- Gates and fences -- Rosery walk -- Porches -- Canopy for swing -- Aviary -- Foot-bridges -- Verandahs -- Tool houses, garden shelters, etc. -- Summer houses. Release Date: Dec 20, 2012 Copyright Status: Public domain in the USA. Submitter John Morris Submitted
-
Version 1.0.0
6 downloads
Editor: Hasluck, Paul N. (Paul Nooncree), 1854-1931 Title: Rustic Carpentry Contents: Light rustic work -- Flower stands, vases, etc. -- Tables -- Chairs and seats -- Gates and fences -- Rosery walk -- Porches -- Canopy for swing -- Aviary -- Foot-bridges -- Verandahs -- Tool houses, garden shelters, etc. -- Summer houses. Release Date: Dec 20, 2012 Copyright Status: Public domain in the USA. -
I have a manual drill press ACME that was used as a yard ornament for years and now stands in my wife’s flower garden. I have had it there for about 20 years. It is rusted but on close inspection and it is not too bad. Every now and then someone will stop and ask if I want to sell it. It is frozen down where you can’t turn the manual wheel. I don’t want to force it and break it. It is a favorite but never gets used. My wife refuses to turn the handle. Preston
- 10 replies
-
- drill press
- manual
-
(and 1 more)
Tagged with:
-
These manuals may have been there already, but I received an email from Shop Smith stating they are starting to put many of their manuals online. Here is the link. Shopsmith -- WWW.SHOPSMITH.COM Shopsmith Owner Manuals Available For Download
- 1 reply
-
- shop smith
- smith
-
(and 2 more)
Tagged with:
-
Years ago I was given this Sears Sander from a guy who said it was junk and would not spin, just hummed. At the time I discovered the tension was very tight. To get it going I pushed back on the tension arm and it worked so I went with that. Today I got to looking at this and wondered why does it not just fire up correctly. In looking at the belt as it spun I also noticed at the bottom pulley the belt was not tracking correctly. So I looked for an adjuster for tracking, much like on a hand held belt sander. Found that, and adjusted the tracking but the tension issue remained. Removed the cover
- 2 replies
-
- sander
- adjustments
-
(and 2 more)
Tagged with:
-
Need parts only manual for the saw. Have operation manual but no parts manual. Anybody locate listing online?....
-
Is there a site where i down load a manual for a table saw.thanks