September 24, 20232 yr Popular Post Got the Christmas ornaments done for this year. Made mice. Running out of Ideas. I think this is the 15th year I have made ornaments to give away. I used a 1.5 X 1.5 X 2.75 blank and they ended up about 2.25" long. A tear drop shape made the best looking bodies IMO. They're finished with Shellac. The eyes and nose are sewing pins. Cut the head off a pin to use as a drill bit. Cut the black heads off leaving appx. .5" of pin to insert into the holes and no glue was required. Here is where I bought them. https://www.amazon.com/pengxiaomei-Straight-Quilting-Dressmaker-Decoration/dp/B087NCXR67?th=1 The tails are pipe cleaners cut to 3" pieces and glued into drilled holes. Purchased them here. https://www.amazon.com/your-orders/pop?ref=ppx_yo2ov_dt_b_pop&orderId=114-0234615-4143423&lineItemId=qiqlqqhlonnsqny&shipmentId=XqMb3k65F&packageId=1&asin=B0054G62V6 For the ears I used .5" X .5" blanks and turned an ear shape. Cut them down the middle on the band saw and glued them in drilled holes. Couple of them broke off while sawing. Dang-It. Can always make more I guess.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.