John Morris Posted October 5, 2020 Report Posted October 5, 2020 "What's It" Basic Rules Reminder For a full run down on this project and rules please go to: "The Patriot Woodworker and MWTCA "What's It" project" Only Patriot Woodworker Members are eligible to participate and receive the award. The MWTCA only accepts a verified source to support your answer, so one should be submitted with your answer, such as a patent, catalog entry, tool book reference, or a respectable website on the subject. Do not let these requirements prevent you from having fun and submitting educated answers on the subject without verification, we can worry about references later. All answers are welcome, as well as healthy debates regarding "What's It". If a verified and referenced answer is not arrived at by the end of each month's "What's It" project, a random draw will be performed for a "One Year MWTCA Club Membership". Only Patriot Woodworker's who participate in this "What's It" topic will be included in the random draw. Additional What's It Rules Unless you are completely sure what this item is, please avoid "definitive statements" that appear that you are without a doubt claiming that you know what the item is. For example stating, "this item is called a "widget xx" used for "insert purpose here". If you are making a definitive statement you must accompany your statement with evidence or proof from a secondary source. An example of acceptable statements within the realm of having fun and educated guesses would be something like this, "I believe it could be", or "It appears it's made for this or that", etc etc etc... Ok ladies and gentlemen, we now have our "What's it" live and ready! The image(s) below is a MWTCA "What's It" image for you to research, and tell us all here in this topic post, just what the heck is it! Project Details The information provided hereon is all the information that is provided, no further information on this item will be added. Cal, Gunny and FlGatorwood 3 Quote
Fred W. Hargis Jr Posted October 5, 2020 Report Posted October 5, 2020 It's a rolling pin for fluted pie crusts. Cal, HARO50, Gunny and 1 other 2 2 Quote
Popular Post DRAGON1 Posted October 5, 2020 Popular Post Report Posted October 5, 2020 It's an old roller for making noodles out of pasta dough HARO50, Fred W. Hargis Jr, HandyDan and 3 others 4 2 Quote
FrederickH Posted October 5, 2020 Report Posted October 5, 2020 Used for rolling massages/cellulite reduction. https://stock.adobe.com/images/massage-with-maderotherapy-rolling-pin/215581151 Fred W. Hargis Jr, Cal, FlGatorwood and 1 other 4 Quote
HandyDan Posted October 5, 2020 Report Posted October 5, 2020 I agree, it's a pasta noodle roller. Here is one for ravioli Gunny, FlGatorwood and Cal 3 Quote
John Morris Posted October 5, 2020 Author Report Posted October 5, 2020 The ridges are too shallow for pasta cutter or roller. Cal and FlGatorwood 2 Quote
John Morris Posted October 5, 2020 Author Report Posted October 5, 2020 11 minutes ago, FrederickH said: Used for rolling massages/cellulite reduction. https://stock.adobe.com/images/massage-with-maderotherapy-rolling-pin/215581151 Pretty danged close! FrederickH, Cal and FlGatorwood 3 Quote
AndrewB Posted October 5, 2020 Report Posted October 5, 2020 (edited) Thats a rolling pin for Pastries LOL. I'm an ex full time military cook. Id recognize something like that anywhere. Its just a wooden version of the new ones. Well it can either be used for pastries or pasta. How ever the one in the OP is I'm assuming a pasta noodle roller. (Note a pasta roller... can be any size or depth the individual person wants it to be and for its intended use and purpose.) Unless this is a factory model design which it doesn't look like. Edited October 5, 2020 by AndrewB FlGatorwood and Cal 2 Quote
JohnM Posted October 5, 2020 Report Posted October 5, 2020 Welp, I was going to say pasta roller also. Cal and FlGatorwood 2 Quote
p_toad Posted October 5, 2020 Report Posted October 5, 2020 anyone else note the metallic appearing pieces on the end and the split about 1/3 from the left side? FlGatorwood, John Morris, HARO50 and 1 other 3 1 Quote
John Morris Posted October 5, 2020 Author Report Posted October 5, 2020 I don't think it's anything for cooking guys. Just think of the wash up, it has metal ends, as if for enclosed bearings, constant washing would ruin the mechanism, I'm still leaning toward Frederick's example. Cal and FlGatorwood 2 Quote
AndrewB Posted October 5, 2020 Report Posted October 5, 2020 Then that only leaves one option.... Its a rolling strainer to squeeze out the water. If it isn't for cooking and meant for washing. Apply pressure to the pin the grooving in the pin is for the water to drain out when pressed. That would make more sense. If its not a pasta roller. FlGatorwood and Cal 2 Quote
Popular Post kmealy Posted October 5, 2020 Popular Post Report Posted October 5, 2020 Springerle press Larry Buskirk, FlGatorwood, steven newman and 4 others 7 Quote
HandyDan Posted October 6, 2020 Report Posted October 6, 2020 Pasta dough is rolled out and pretty dry. Lots of flour used to keep them from sticking. Cal and FlGatorwood 2 Quote
p_toad Posted October 7, 2020 Report Posted October 7, 2020 it's a roller for a felting machine. FlGatorwood and Cal 2 Quote
John Morris Posted October 7, 2020 Author Report Posted October 7, 2020 10 hours ago, p_toad said: it's a roller for a felting machine. That's interesting Peter, hmm, further explanation? I looked up felting machine and not sure what it does yet. Cal and FlGatorwood 2 Quote
John Morris Posted October 7, 2020 Author Report Posted October 7, 2020 On 10/5/2020 at 2:20 PM, p_toad said: anyone else note the metallic appearing pieces on the end and the split about 1/3 from the left side? I was wondering about that split as well Peter, like it's in two sections? Cal and FlGatorwood 2 Quote
Larry Buskirk Posted October 7, 2020 Report Posted October 7, 2020 ... https://www.bing.com/images/search?q=wallpaper+printing+roller&qpvt=wallpaper+printing+roller&form=IQFRML&first=1&scenario=ImageBasicHover FlGatorwood, Cal and Gerald 3 Quote
Gerald Posted October 7, 2020 Report Posted October 7, 2020 3 hours ago, Larry Buskirk said: ... https://www.bing.com/images/search?q=wallpaper+printing+roller&qpvt=wallpaper+printing+roller&form=IQFRML&first=1&scenario=ImageBasicHover Was thinking that but this one has no paint on it FlGatorwood, Cal and HARO50 3 Quote
Ron Altier Posted October 7, 2020 Report Posted October 7, 2020 On 10/5/2020 at 7:22 AM, John Morris said: The ridges are too shallow for pasta cutter or roller. Depends on how thick you like your pasta, think about angel hair spaghetti John Morris, Cal, FlGatorwood and 1 other 4 Quote
.thumb.jpg.573d1497d0675219908c85aabefd797a.jpg)
Recommended Posts
Join the conversation
You are posting as a guest. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.