Popular Post kmealy Posted February 26, 2019 Popular Post Report Posted February 26, 2019 Spent most of the day "screwing around." #8 x 2.75" w/ #2 Robertson needing countersink, #6 x 5/8 w/ #2 Squipps, #1 Squipps, or #1 Robertson, #6 x 1.25" w/ #2 Robertson. Full extension 12" & 14" side glides with 1/2" extra clearance on hinge side, 3.5" from top, 2.75" from bottom, with width +0 to -1/16". 1/2" dovetails 2" on center, 3/4" dovetails 3" on center. Cup hinges, face frame, 3/8" overlay, self closing, w/ one set of four 35mm holes, 22.5 mm from edge 16" on center, 4" from ends, the other 35mm holes, 22.5 mm from edge set so side glides did not hit on the way out and miss face frame on bottom. My head hurts. Last week, I did 140 1/4" shelf pin holes, 32mm apart on the top half of this unit. Gary Hanscom, Ron Altier, steamshovel and 9 others 11 1 Quote
Popular Post lew Posted February 26, 2019 Popular Post Report Posted February 26, 2019 Now my head hurts! HARO50, Grandpadave52, steamshovel and 2 others 1 4 Quote
HandyDan Posted February 26, 2019 Report Posted February 26, 2019 That's a lot of work. Looking good. Gunny and FlGatorwood 2 Quote
Popular Post Grandpadave52 Posted February 26, 2019 Popular Post Report Posted February 26, 2019 6 hours ago, lew said: Now my head hurts! Mine too trying to read this "screwy project." Gunny, schnewj, FlGatorwood and 2 others 1 4 Quote
Popular Post kmealy Posted March 1, 2019 Author Popular Post Report Posted March 1, 2019 today's progress HARO50, Gunny, Stick486 and 7 others 10 Quote
Grandpadave52 Posted March 1, 2019 Report Posted March 1, 2019 32 minutes ago, kmealy said: today's progress WOW...you're not "screwing" around now. Gonna' need some help to get that out of the basement. Cal, FlGatorwood and HARO50 3 Quote
Stick486 Posted March 1, 2019 Report Posted March 1, 2019 (edited) That's better than nice Keith... Edited March 1, 2019 by Stick486 Cal and FlGatorwood 2 Quote
Gunny Posted March 1, 2019 Report Posted March 1, 2019 NICE!! I was lucky to get a small box made and fitted at a few angles this evening. FlGatorwood, Grandpadave52, LarryS and 1 other 3 1 Quote
kmealy Posted March 1, 2019 Author Report Posted March 1, 2019 11 hours ago, Grandpadave52 said: WOW...you're not "screwing" around now. Gonna' need some help to get that out of the basement. Yes, been seeing a series of doctors and the main one says I should not be doing any heavy lifting. Made in 3 pieces because I need to deliver them 4 hours away. Gotta get them out of the shop and into the pickup. Cal, Gunny, FlGatorwood and 3 others 4 2 Quote
Grandpadave52 Posted March 1, 2019 Report Posted March 1, 2019 2 hours ago, kmealy said: Yes, been seeing a series of doctors and the main one says I should not be doing any heavy lifting. Hope everything is OK? Pay attention when they say no heavy lifting. Gunny and Cal 2 Quote
kmealy Posted March 1, 2019 Author Report Posted March 1, 2019 1 hour ago, Grandpadave52 said: Hope everything is OK? Pay attention when they say no heavy lifting. Some nerve issues in spine and of all things an excess of growth hormone seems to be the findings after a number of tests. Doc's first impression was, "You have really big hands." You know what they say about men with big hands and big feet? We have a really hard time finding gloves and shoes that fit. Grandpadave52, p_toad, Gunny and 1 other 4 Quote
Stick486 Posted March 1, 2019 Report Posted March 1, 2019 2 hours ago, Grandpadave52 said: Hope everything is OK? Pay attention when they say no heavy lifting. here's pulling for you... 48 minutes ago, kmealy said: We have a really hard time finding gloves and shoes that fit. that too... FlGatorwood and p_toad 2 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.