Popular Post John Morris Posted January 21, 2019 Popular Post Report Posted January 21, 2019 Good Monday Morning! Good Monday morning Patriot Woodworkers! What did you get done over the weekend, and what have you planned for the week ahead! Inquiring minds want to know. Please tell us what's happening in your shops, your life, and any events going on with you. Thank you for being here folks! New Members Please welcome to our community, @ErnestoP, please click on their names and leave a message of welcome on their profile page. And to our new members, welcome to your new community folks! Updated Wiki Page Axe: The axe has been around for a long time, being one of the oldest tools used by mankind as far back as 1.6 million years ago. The first known man to use the axe were Homo ergastar. These axes had no shaft, or any means to hold an axe other than by the axe head itself. These axes would be classified as hand axes for obvious reasons. Read more... Featured Topic Featured Image Boys in Catholic High School wood shop learning scroll sawing. Retrieved from the Digital Public Library of America <http://collections.lib.uwm.edu/cdm/ref/collection/jbmurdoch/id/2420>. FlGatorwood, Cal, Gunny and 3 others 6 Quote
Popular Post DAB Posted January 21, 2019 Popular Post Report Posted January 21, 2019 gluing up today. also unclamped a blank that will be a new recipe box for my wife. wormy maple with walnut accents. work on that tomorrow. also washed my filthy truck. with captured, very cold, rain water and snow melt. brrr..... will wash off the parking pad another day. was too chilled to use the hose anymore. Gunny, HARO50, Harry Brink and 3 others 6 Quote
lew Posted January 21, 2019 Report Posted January 21, 2019 Played a little on the lathe today but mostly just trying to recover from shoveling rain soaked snow. The snow blower broke down before I even got to the driveway! FlGatorwood, Gene Howe, HARO50 and 1 other 4 Quote
Gunny Posted January 21, 2019 Report Posted January 21, 2019 Installed new electric heater today. Minor electrical work to upgrade outlet to 30 amp. Thankfully I went overkill years ago and used 8 gauge wire to this outlet. Only had to change outlet and the wire end that goes to shop A/C. Put two safety chains on just in case. Both plug into same outlet, but not at same time. Heater attached to same sled as fan so only change out fan / heater based on season. Very nice. Ran on 3000W, low setting and took shop from 45F to 80F in 1 1/2 hours. Means less run time and less $$ on my bill. Cal, FlGatorwood and HARO50 3 Quote
Gunny Posted January 21, 2019 Report Posted January 21, 2019 Now back to router table / drawer build. FlGatorwood, HARO50 and Cal 3 Quote
Gene Howe Posted January 21, 2019 Report Posted January 21, 2019 Working on an adjustable coping/small parts router sled. Gotta use those knobs for something. Hair cut, truck de muck, ship some saw blades, have the PO hold our mail...all tomorrow. Then, hook up the trailer with the Polaris when I get home. Leaving Wednesday for a 5 or 6 day stay in Tucson. FlGatorwood, Cal, Gunny and 1 other 4 Quote
lew Posted January 22, 2019 Report Posted January 22, 2019 41 minutes ago, Gene Howe said: Leaving Wednesday for a 5 or 6 day stay in Tucson. Enjoy!! Cal 1 Quote
Popular Post Gunny Posted January 22, 2019 Popular Post Report Posted January 22, 2019 Was inspired by Steven Newman and his finds at these flea markets and such. Dug out my Grandfathers angle tool and polished the steel back. The handle was done, split and such. The lock nut was missing so I found a round knurled knob and made that fit my new handle. Mahogany and a piece of purpleheart. Used it today and was pleased with the results. HandyDan, steven newman, Grandpadave52 and 5 others 7 1 Quote
Gene Howe Posted January 22, 2019 Report Posted January 22, 2019 12 hours ago, lew said: Enjoy!! Thanks, Lew. Five days of warmth, sun and GREAT Mexican food. Couldn't be better. But, it always feels good to get back home. HARO50, Gunny and Cal 3 Quote
HandyDan Posted January 22, 2019 Report Posted January 22, 2019 Just doing some reorganizing this week. Hard job for a borderline hoarder like me. Can't seem to toss what should be tossed because you never know what it might be good for. Grandpadave52, HARO50, Gunny and 1 other 3 1 Quote
Grandpadave52 Posted January 23, 2019 Report Posted January 23, 2019 Late to the party again. Kids were out of school yesterday for MLK Day. 3x round trips to HS yesterday plus swim conference finals in county seat last night. 2x round trips today. One more swim meet Thursday and the regular season is over. Sectional State prelims next Thursday. Guess I'm going to the boy's varsity basketball game Saturday night. Oldest grand-daughter is one of four seniors nominated for Winter Homecoming Queen. Reveal and crowning ceremony at half-time. Some personal business to attend to...remainder of the week trying to cope with the daily weather extremes and entertain an extremely bored dog. HARO50, Cal, p_toad and 1 other 4 Quote
Stick486 Posted January 23, 2019 Report Posted January 23, 2019 just napping my way into Tuesday... p_toad, Cal and HARO50 1 2 Quote
Gunny Posted January 23, 2019 Report Posted January 23, 2019 20 minutes ago, Stick486 said: just napping my way into Tuesday... Pace yourself! Cal, p_toad and HARO50 3 Quote
Stick486 Posted January 23, 2019 Report Posted January 23, 2019 2 minutes ago, Woodbutcherbynight said: Pace yourself! I am... no sense in over exerting myself... HARO50, Cal and p_toad 3 Quote
Gunny Posted January 23, 2019 Report Posted January 23, 2019 Just now, Stick486 said: no sense in over exerting myself... Exactly!! Besides you need to rest up. I am almost done with router project. Have yet to decide what is next and the wife says she doesn't have anything she wants done. I am thinking I need a computer desk with drawers. Maybe do it up in a purple camo epoxy top. My old coworkers from Iraq will be enjoying that one. p_toad, HARO50 and Cal 3 Quote
Grandpadave52 Posted January 23, 2019 Report Posted January 23, 2019 14 minutes ago, Woodbutcherbynight said: and the wife says she doesn't have anything she wants done. dangerous statement...be sure to run that through the enigma several times HARO50, Cal, DuckSoup and 1 other 4 Quote
Popular Post Gunny Posted January 23, 2019 Popular Post Report Posted January 23, 2019 44 minutes ago, Grandpadave52 said: dangerous statement...be sure to run that through the enigma several times She is Ukrainian, trust me when she wants something she will say as much.... no beating around the bush. steven newman, Grandpadave52, p_toad and 2 others 5 Quote
steven newman Posted January 23, 2019 Report Posted January 23, 2019 Wasn't a very good weekend.... HARO50, Grandpadave52 and Cal 1 2 Quote
Gunny Posted January 23, 2019 Report Posted January 23, 2019 5 minutes ago, steven newman said: Wasn't a very good weekend.... Understandable for you Steve, sorry about your loss. Grandpadave52, steven newman, Cal and 1 other 3 1 Quote
Popular Post p_toad Posted January 23, 2019 Popular Post Report Posted January 23, 2019 18 hours ago, Woodbutcherbynight said: no beating around the bush I've heard that can be very painful. Stick486, Grandpadave52, Gunny and 3 others 1 5 Quote
.thumb.jpg.573d1497d0675219908c85aabefd797a.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.