November 22, 20187 yr anyone needing bits Kutzall is having a sale. Theeeeeese are the bits I'm having trouble wearing out..
November 22, 20187 yr Thanks for the heads up, Jesse. There's some good deals to be had there. Edited November 22, 20187 yr by Gene Howe
November 23, 20187 yr Author When you get the carving station set up nice and purty how about a picture or two for my area could use a face lift type of modernizing. I happened to put it in a dead corner and even though I have a small fan to start the dust going one direction it seems to turn and go into circles around my head before it gets to the fan on the floor with the hepa filter then it supposed to go on to the fan going out side in the ceiling...I have been designing some arrows to scroll saw out to place here and there then maybe the dust can understand what it should do!!! I hope you did notice I added hepa for I have no idea what that is but read it somewhere and at the time sounded very important, likeund to me.
November 23, 20187 yr Jesse, mine will only be about 4' wide. Depth TBD...I'm guessing about 3'. I want to make it portable so, collapsible legs. The top/bench will likely be peg board so, the saw dust can be exhausted with a dedicated DC. I'll have a back on it for lights and to hang the motors. Probably use Baltic Birch ply for most of it.
Join the conversation
You are posting as a guest. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.