October 23, 20187 yr Popular Post comment_163718 I saw an interesting way to glue a cracked board. The piece was cracked at the end with a crack about 8 inches long. The guy had opened it just enough to get a piece of dental floss thru. He put glue in and on the crack and ran the floss back and forth to spread the glue thru the crack. I will have to try this one, I think it can work. Report
October 23, 20187 yr Popular Post comment_163726 I've used the shop vac trick. Apply the glue to the top of the board on the crack and put the shop vac hose on the other side of the board over the crack. The suction pulls the glue into the crack. Report
October 23, 20187 yr Popular Post comment_163730 This is why I visit this site! Great ideas. If I put the vac in one ear and suck the dental floss through the other ear, will it improve my memory so I remember this tip? Report
October 23, 20187 yr comment_163731 I wouldn't try it, Pete. Dental floss is a removal device. Report
October 23, 20187 yr Popular Post comment_163749 Well, finally a use for dental floss. Thanks for posting, I am going to try that, if I can find any dental floss. Herb Report
October 23, 20187 yr Popular Post comment_163751 Quote Hope he has unwaxed floss. I use an air gun to drive glue in. Edited October 23, 20187 yr by Cliff Report
October 23, 20187 yr comment_163754 8 minutes ago, Cliff said: I use an air gun to drive glue in. That always splatters it for me. Report
October 24, 20187 yr comment_163830 5 minutes ago, It Was Al B said: Do you have ghosts in your closets Dave? No, just skeletons Report
October 24, 20187 yr comment_163832 I have a rubber tipped blo gun and this works for me and sometimes there is no other side where I could use a vac. And if I don't want the extra glue on the surface I use these 12" long feeler gauges that go down to .0015 for the really thin cracks... Edited October 24, 20187 yr by Smallpatch Report
October 24, 20187 yr comment_163847 1 hour ago, Buckaroo said: Whittle toothpick down Now those I can make...usually need 3 or 4 good 8 foot 2x4's to make a batch, but I'm getting better at it. Report
October 29, 20187 yr comment_164458 On 10/23/2018 at 3:51 PM, lew said: That always splatters it for me. Can't have it on the surface. It's gotta be inside the crack then the air drives it deeper Report
October 13, 20196 yr comment_205060 On 10/23/2018 at 1:53 PM, Gene Howe said: I wouldn't try it, Pete. Dental floss is a removal device. The dental floss remove the air and gives room for the glue... Report
October 13, 20196 yr comment_205063 I'll have to keep the floss trick in mind. Usually if i can spread it I can get a syringe in it. Report
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.