July 12, 201214 yr We've had alot of discussions on the main page lately but nobody is talking about their latest project. Anyone have anything in the hopper to talk about. I'm getting ready to build a new router table so that I can begin building new kitchen cabinets for the LOML. I bought a new Bosch 1617 router to hang under it and I took the lazy way out and ordered a MLCS 24 X 32 top with an aluminum insert. Hopefully, Monday I'll be building the lower unit. I'll have about $350 in the table but that's cheaper than $10,000 for new cabinets. Maybe I can get Moody to come to Indiana for an extended visit to help. So gang, what's on your bench?  Ron DudelstonSite HostAbove and Beyond WoodWorks
July 12, 201214 yr I made a trip to the Amish saw mill on Saturday to pick up some 4x4 cedar post. I am building two Big Green Egg tables out of cedar. Still got three porch swings to finish up. Since we got a break in the heat maybe I can get back into the shop.John MoodySite AdministratorJohn Moody Woodworkshttp://www.johnmoodywoodworks.com
July 12, 201214 yr I've got a bunch I need to be working on but here lately I seem to have had a severe case of the lazies  and haven't gotten anything accomplished. GregScroll Saw forum hosthttp://www.thesawdustfactoryga.com/
July 12, 201214 yr Want to make some more pepper grinders and salt cellars. My aunt wants an entertainment center, too. Oh yes, Mimi wants the house painted before summer is over, too.Lew Kauffman-Wood Turners Forum HostTime traveler. Purveyor of the world's finest custom rolling pins!
July 12, 201214 yr Lew's going to be a busy boy Lewis Kauffman said: Want to make some more pepper grinders and salt cellars. My aunt wants an entertainment center, too. Oh yes, Mimi wants the house painted before summer is over, too. Lew Kauffman-Wood Turners Forum HostTime traveler. Purveyor of the world's finest custom rolling pins!
July 12, 201214 yr I have started a split top workbench with a center well. Got my lumber cut to size. May get some more done now that the triple digit temps are gone.
July 12, 201214 yr I got to do the paint thing too Lew. Not looking forward to it either. John MoodySite AdministratorJohn Moody Woodworkshttp://www.johnmoodywoodworks.com
July 12, 201214 yr Author John and Lew, how about a painting patry?Ron DudelstonSite HostAbove and Beyond WoodWorks
July 12, 201214 yr I got 3 mirror frames made up and did the final sanding yesterday so they are ready to go to finish. Now I have to get the garage all cleaned up from all the sawdust so that I can spray next week. Allen WorshamCorona, CAallenworsham@earthlink.nethttp://www.awcreationsandwoodcrafts.com'Graze in every man's field, but always give your own milk' J. Vernon McGee
July 12, 201214 yr Author Allen, we have the same problem with dust. If my project is small I can finish it in the barn loft. If its large then i have to do a thorough cleaning.Ron DudelstonSite HostAbove and Beyond WoodWorks
July 12, 201214 yr We tried that one time it took more paint and beer than I anticipated!Ron Dudelston said:John and Lew, how about a painting patry?Ron DudelstonSite HostAbove and Beyond WoodWorks
July 12, 201214 yr What's on my bench? My weedwhacker and a bunch of rags! Then I gotta do a ton of yard work this weekend. I wish I had a more romantic picture of my bench for yall. It's finally slowed down at Courtland Woodworks, thank goodness! I'll be settin that ol rocker I been trying to finish up on the bench hopefully this Saturday, and get it all wrapped up!John MorrisThe Patriot WoodworkerProud Supporter of Wounded Warrior Project and Homes For Our Troops
July 13, 201214 yr Are you volunteering to come down? What size paint brush do you want? Ron Dudelston said:John and Lew, how about a painting patry? Ron DudelstonSite HostAbove and Beyond WoodWorks
July 13, 201214 yr I haven't been able to do any shop work since December with this remodel project going on. Hopefully I finish it someday and then I need to find someplace to set up my shop and get my equipment moved from Michigan to Ohio. So far I've got the master bedroom and bath, kitchen and most of the living room done. Can't say that I built the cabinets like some of you are doing, these are just the stock off the shelf ones from Lowes.
July 13, 201214 yr Are those before and after pictures?Roy Boomershine said: I haven't been able to do any shop work since December with this remodel project going on. Hopefully I finish it someday and then I need to find someplace to set up my shop and get my equipment moved from Michigan to Ohio. So far I've got the master bedroom and bath, kitchen and most of the living room done. Can't say that I built the cabinets like some of you are doing, these are just the stock off the shelf ones from Lowes.
July 13, 201214 yr Author Paint brush? We don't need no stinking paintbrush.John Moody said:Are you volunteering to come down? What size paint brush do you want?Ron Dudelston said:John MoodySite AdministratorJohn Moody Woodworkshttp://www.johnmoodywoodworks.com
July 14, 201214 yr Sadly after this picture was taken the bowl popped off the lathe and hit the wall I've had that happen.
July 15, 201214 yr I just did a cleaning of the shop and hopefully will get started on something next week. This week will be a right off as far as ww'ing goes. But I did just finish a box as a gift for my cousins wedding last month.
July 15, 201214 yr Author I really like the spalted lidScott Fleming said: I just did a cleaning of the shop and hopefully will get started on something next week. This week will be a right off as far as ww'ing goes. But I did just finish a box as a gift for my cousins wedding last month.
July 15, 201214 yr That's gorgeous. The purple inlay really sets off the spalting.Scott Fleming said: I just did a cleaning of the shop and hopefully will get started on something next week. This week will be a right off as far as ww'ing goes. But I did just finish a box as a gift for my cousins wedding last month.
Archived
This topic is now archived and is closed to further replies.