March 15, 201412 yr comment_4135 Does anyone know where I can get a replacement dust port adapter for a Dewalt 735 planer? Report
March 15, 201412 yr comment_4153 Mark, Is this the piece that connects the hose to the planer? Lew Kauffman-Wood Turners Forum HostTime Traveler and Purveyor of the Universe's Finest Custom Rolling Pins! Report
March 15, 201412 yr comment_4152 Yes it is Lew. I have been trying to find one on Ebay or other places, even Dewalt does not list it in their parts manual, go figure.Lewis Kauffman said: Mark, Is this the piece that connects the hose to the planer? Lew Kauffman-Wood Turners Forum HostTime Traveler and Purveyor of the Universe's Finest Custom Rolling Pins! John MorrisThe Patriot Woodworker Report
March 15, 201412 yr comment_4150 Is this it- Lew Kauffman-Wood Turners Forum HostTime Traveler and Purveyor of the Universe's Finest Custom Rolling Pins! Report
March 15, 201412 yr comment_4149 That's the one Lew!Lewis Kauffman said: Is this it- Lew Kauffman-Wood Turners Forum HostTime Traveler and Purveyor of the Universe's Finest Custom Rolling Pins! John MorrisThe Patriot Woodworker Report
March 15, 201412 yr Author comment_4148 Levi that's what mine looks like but instead of the hole on the notch it has another notch Report
March 15, 201412 yr comment_4147 If you think this one will work, where would you like it sent? Lew Kauffman-Wood Turners Forum HostTime Traveler and Purveyor of the Universe's Finest Custom Rolling Pins! Report
March 15, 201412 yr Author comment_4146 I might be able to to take my dremel and make the notch on the other side. On the back planer the dust port hole has a little round rand tab on each side. You just slide it on and turn to lock it on Levi Report
March 15, 201412 yr Author comment_4145 Yeah that's probably the one because the side I thinking has another notch is shattered and I didn't get to see or feel it before it was like that. Thank you for finding it!!!!! I appreciate all your help!!!! Report
March 15, 201412 yr comment_4144 The 2 round pins on the planer side chip ejection port. One is fixed and the other is spring loaded so it stays "popped out". The plastic adapter hooks on by placing the adapters slotted hole onto the fixed pin and then using a punch (or the supplied blade change Allen wrench) depress the spring loaded pin and slide the adapter onto the planer chip ejector chute. The rotate the adapter clockwise so the fixed pin seats into the bottom of the slot/hole and the spring loaded pin pops out into the single hole. The remove the adapter- reverse the steps by pushing in op the spring loaded pin and turning the adapter counter clockwise.Where would like the adapter sent??Mark Wilson said:Yeah that's probably the one because the side I thinking has another notch is shattered and I didn't get to see or feel it before it was like that. Thank you for finding it!!!!! I appreciate all your help!!!! Report
March 15, 201412 yr Author comment_4143 Thanks for information Levu. Guess if should've looked at it better. My address is. 209 E. Ross Palmyra, MIO 63461 . Thank you so much !!!! Report
March 15, 201412 yr comment_4142 I'll stick it in the mail on Monday. You should have it in a couple of days.LewMark Wilson said:Thanks for information Levu. Guess if should've looked at it better. My address is. 209 E. Ross Palmyra, MO 63461 . Thank you so much !!!! Report
March 15, 201412 yr comment_4141 http://www.ereplacementparts.com/adapter-p-71402.htmlSomewhere in Kenya.... a village is missing its idiot! Alaskans for Gobble Warming. Report
March 17, 201412 yr comment_4140 Mark, I put the adapter in the US Mail today. They said you should have it by Thursday. Lew Lew Kauffman-Wood Turners Forum HostTime Traveler and Purveyor of the Universe's Finest Custom Rolling Pins! Report
March 17, 201412 yr Author comment_4139 Lewis thank you for putting the adapter in the mail for me . I'll keep an eye out for it. Thanks again!!!!! Report
March 23, 201412 yr comment_4138 Mark, did the adapter arrive??Mark Wilson said:Lewis thank you for putting the adapter in the mail for me . I'll keep an eye out for it. Thanks again!!!!! Report
March 23, 201412 yr Author comment_4137 Lewis I received the adapter Friday . Sorry about taking so long to let you know. Been busy with my daughter. Thank you very much it works great. Report
March 23, 201412 yr comment_4136 Great job guys!!!!! I love it when folks come together for the betterment of the other, team work and giving at its' finest transpires here on The Patriot Woodworker, thanks guys for being a part of our community. John MorrisThe Patriot Woodworker Report
Archived
This topic is now archived and is closed to further replies.