Skip to content
View in the app

A better way to browse. Learn more.

The Patriot Woodworker

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (â‹®) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Laminate countertop

Featured Replies

Ongoing updates to our home built in the 1990s. We still have the original laminate countertops and have decided its time to replace them. Considered quartz but after a couple estimates ($$$) decided to look at replacing with laminate. Menards has a pretty neat sink option that is built into the surface (so is a flush mount). This is a picture of the display of that sink.

20260918_153838.jpg

Anyway, worked on checking measurements and this main section is 12 foot 11/16 in length.

20260919_195300.jpg

In looking at the planning tool, there is nothing over 12 foot. Totally perplexed how we have this odd length (and yes, have measured and remeasured).

Trying to think of ideas of how to "stretch" the length to avoid an extra seam beyond that corner 45.

20260919_195354.jpg

Really want to have the integrated backsplash like we do now.

20260919_195431.jpg

Any suggestions or ideas are appreciated! Plan to go to Menards to see what they suggest next week. Had hoped for an "easy" update but our house seems to always have a surprise in store. 🙄

  • Author
39 minutes ago, lew said:

Maybe a thicker backsplash on the wall by the stove

I'm hoping to have the integrated backsplash that is continuous with the counter surface. Trying to avoid that caulk line along the joint if the backsplash is a separate piece.

How much is the overhang at the right end? Typically it's 1", so a 12' length would just omit the overhang.

Another thought... Are you planning to tile the backsplash? If so, you could add 1/2" Hardi tile backer (or even sheetrock) on the stove wall. (Actually, IIRC the Hardi product is only 7/16".) Then you only have 3/16" to worry about, which the overhang should cover.

I can't see what's to the left of the stove, but a little creativity at the end shouldn't be too much to deal with.

Maybe talking to Menards. You might get lucky and find their tops are just a tad longer than 12'.

Check your area for companies that make custom countertops. I would check to see how competitive their prices are.

We went with a square fit to get 12' on our countertop. To me it doesn't matter square or 45° a seam is a seam.

We have tile backsplash.

PXL_20260920_131353665.jpg

Edited by DuckSoup

  • Author
3 hours ago, JimM said:

How much is the overhang at the right end? Typically it's 1", so a 12' length would just omit the overhang.

Looked at that and still would be short such that the top of the cabinet would be exposed.

1 hour ago, JimM said:

Are you planning to tile the backsplash?

Plan to just keep the painted wall.

1 hour ago, JimM said:

I can't see what's to the left of the stove, but a little creativity at the end shouldn't be too much to deal with.

Here's the other side. I don't see this part to be too bad to figure out.

20260920_081041.jpg

1 hour ago, Fred W. Hargis Jr said:

Maybe talking to Menards. You might get lucky and find their tops are just a tad longer than 12'.

In a quick call yesterday, the associate said 12 foot max, but plan to go to the store to talk with someone. Easier to discuss with pictures, etc.

2 minutes ago, DuckSoup said:

Check your area for companies that make custom countertops. I would check to see how competitive their prices are.

Good idea. I do really want that integrated sink. I have a typical surface mount sink now and don't like that style. I had not seen the sink option from Menards before - not sure how widely available that would be.

I did see this online (FB image). Although terrible with that veined counter, it might work with the simple surface color/pattern we are considering. Also would be in the back corner where I typically have a fruit bowl, etc. Plus I don't need it to be very large. Not ideal, but a consideration.

Screenshot_20260919_204714_Chrome.jpg

Edited by BB1

  • Author
13 minutes ago, DuckSoup said:

We went with a square fit to get 12' on our countertop. To me it doesn't matter square or 45° a seam is a seam.

Yours looks nice with the use of a separate backsplash. As you noted, a seam is a seam. I looked at that arrangement but then realized I cannot have the integrated backsplash that is continuous with the counter in that back corner (one side only). I realize that's an "old style" but I like it for cleaning, etc.

20260920_082618.jpg

If you are going to keep a wood trim on the front edge you could have the countertop made to 12' and leave the laminate off the end. Continue the wood trim around the corner, where the laminate would have been & add a piece of wood to the end 3/4" thick and route it flush to the countertop and backsplash, that would give you the overhang.

  • Author
2 hours ago, DuckSoup said:

If you are going to keep a wood trim on the front edge

Was planning to update that to a laminate edge as that wood is a bit dated. We have been considering if there is a way to build up that edge without it looking like a DIY patch. And likely would need to repeat that on a couple other edges that face the room.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.