My fault, I jumped the gun and purchased this shed online without verifying the actual dimensions, it advertises as a 4' x 8', I knew from experience it wouldn't be exact so I was ready for a inch or two on the lesser side of the overall, but who in the tarnation would add to the width! I was expecting to be able to frame up a floor and use a standard 4x8 sheet of ply, I thought I'd have to reduce the size of the floor a couple inches here and there, but not add to it! 51.6 Inches??????

 

Make the frame 4X8 and then bolt a 4x4 on the back even with the plywood.

2 minutes ago, HandyDan said:

Make the frame 4X8 and then bolt a 4x4 on the back even with the plywood.

Dan, to make sure I'm hearing ya right, so bolt a 4x4 on the long side outside right?

Just now, John Morris said:

Dan, to make sure I'm hearing ya right, so bolt a 4x4 on the long side outside right?

 Or to balance it out I could screw up a 2x4 on each side outside?

Yes bolt outside.  Wouldn't hurt my feelings.  More money though.

Edited February 8, 20251 yr by HandyDan

2x6's

 

Need to be careful of water runoff.  I like to see the siding drop the water to the ground.  You don't want it to land at floor level and run inside. 

21 minutes ago, lew said:

2x6's

YES! thanks Lew