June 15, 20197 yr comment_193505 I try to match the bit size to the shank of the screw. The part the threads wind around. I do it by eye, but a guy could use a caliper. In hardwood I drill the full length of the screw. In soft wood, I stop a bit shy of the full length to give the pointy end something to bite. And, I always lube the screw. I keep a melted toilet wax ring in a plastic box and stick all the screws in it. Keeps them handy and pre lubed. Report
June 15, 20197 yr comment_193513 37 minutes ago, Gene Howe said: I keep a melted toilet wax ring in a plastic box and stick all the screws in it. Keeps them handy and pre lubed. Good tip! Report
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.