MY WORK TABLE IS DIRECTLY IN FRONT OF AND SAME HEITH AS TABLE SAW.  i BUILT A GIZMO TO HANDLE THE CHIPS FROM BLADE. WIDE AT TOP NARROW AT BOTTOM.

CAULKED EVERY OPENING ON TOP OF TS. THIS THING  GOES FROM TOP UNDER BLADE TO THE FLOOR...

NEAR THE FLOOR MADE OPENING FOR A 5 HOSS, BOUT 8 GALLON, VACUUM.

MADE PLACE UNDER THE TABLE FOR IT TO LIVE, HOOKED IT UP TO THE GIZMO TO CATCH THE CHIPS.

VACUUM/DOWN PRESSURE IS SO GREAT NO CHIPS GO ANYWHERE BUT DOWN.  WIRED 5 HOSS INTO TS SWITCH, BOTH COME A LIVE AT SAME INSTANT.

 

 

 

 

HAVE SEVERAL BLACK ??/PLASTIC CLAMPS(BOUT 8" LONG) FOR SMALL PLACES/PIECES.

CLOSED UP/TOGETHER MAKES A OPENING/CIRCLE IN THE JAW AREA.

I DRILLED A HOLE N A 2X (UP HEAD HIGH) DROVE A DOWEL IN HOLE

SLID MANY OF THESE CLAMPS ON THE DOWEL, USING THAT JAW HOLE

THEY UP HIGH & HANDY.

Hey Buck, how about some pictures of your table saw gizmo?  I have about given up on dust collection from my table saw, so I'm open to any ideas.

15 hours ago, PostalTom said:

Hey Buck, how about some pictures of your table saw gizmo?  I have about given up on dust collection from my table saw, so I'm open to any ideas.

THINK ABOUT WHAT I'D HAVE TO DO TO MAKE PICTURES, SORRY.