September 25, 201411 yr comment_55018 Yesterday I was driving about a mile west of me when I saw an older gentleman putting this out by the road. It's a Cabboose Stove made by the Excelsior Stove Co. of Quincy Ill. Since my shop is a converted 24' trailer, this should be just about perfect. It needs a little work, the top is broke by the chimney pipe, and the doors are rusted shut. I got the lower draft door working today after a few hours in the electrolysis tank. Report
September 25, 201411 yr comment_55019 That's pretty cool...pun intended. Hope you can get it to burn safely. I had a Rock Island wood burner that took 2' long logs. Those old stoves can get very hot. I had to locate the stove 3' away from the Green Board wall.(supposedly fire resistant) Used to be a time when an asbestos panel would have helped. I found one here but not sure of how effective it is. Report
September 25, 201411 yr comment_55020 Snow on the ground, pot of Joe on the top, toasty warm in the shop. Doesn't get much better than that! Report
September 26, 201411 yr Author comment_55021 That's pretty cool...pun intended. Hope you can get it to burn safely. I had a Rock Island wood burner that took 2' long logs. Those old stoves can get very hot. I had to locate the stove 3' away from the Green Board wall.(supposedly fire resistant) Used to be a time when an asbestos panel would have helped. I found one here but not sure of how effective it is. Snow on the ground, pot of Joe on the top, toasty warm in the shop. Doesn't get much better than that! Gene, I'm dismantling the whole stove, it bolts together in sections. I'll probably braze the top back together, it has three clean breaks which can be seen in the second photo. This is a real small stove, about 12" diameter by 23" high. I use cement board around wood burners, I also have a "fancy old" fireplace insert cover that I will put behind this stove as a heat shield. In the house we have an 1880's "Parlor" Stove, and a 1918 gas/wood burning "Kitchen Range" that we use every year. Lew, I can wait for the snow, nothing like a cup of Joe out of an enamel wear percolator! Report
September 26, 201411 yr comment_55026 I'll pass on the snow but I love perc'ed coffee. BTW Larry, did i miss pictures of the completed mobile shop inside? Report
September 26, 201411 yr Author comment_55027 I'll pass on the snow but I love perc'ed coffee. BTW Larry, did i miss pictures of the completed mobile shop inside? Gene, I'm having a cup of percolated coffee now. No you didn't miss photos of the shop, I'm finally getting back to it. It has been used basically for storage for the past couple of years. Report
September 27, 201411 yr comment_55035 Now that is just too cool Larry. I love it and the association! Report
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.