February 25, 201214 yr comment_33426 I need some! I have a client who wants a project made entirely from Tiger Maple. This is the shelf he wants. It will be 48" wide by 48" tall. Thanks for looking! John MorrisThe Patriot WoodworkerProud Supporter of Wounded Warrior Project and Homes For Our Troops Report
February 26, 201214 yr comment_33443 I have heard a lot of good feed back about www.woodworkerssource. It's listed on the Resources page here at TPW.Harry BrinkBulldog WoodworkingMontana Report
February 26, 201214 yr comment_33442 Here's a place but the shipping will probably make it prohibitive.Hearnes Hardwood Lew Kauffman-Wood Turners Forum HostTime traveler. Purveyor of the world's finest custom rolling pins!Lew Kauffman-Wood Turners Forum HostTime traveler. Purveyor of the world's finest custom rolling pins! Report
February 26, 201214 yr comment_33441 Hey John, Bell Forrest Products in Ishpeming here in the Upper Peninsula of Michigan is a good source. They have a website and ship across the country. Report
February 26, 201214 yr comment_33440 John, I believe Bob Kloes hassome but the shipping from Wisconsin may eat you alive.Ron DudelstonSite HostAbove and Beyond WoodWorks Report
February 26, 201214 yr comment_33439 Kloes would have been my suggestion, but as Ron said the shipping may be a deal killer. He has a large supply though.John MoodySite AdministratorJohn Moody Woodworkshttp://www.johnmoodywoodworks.com Report
February 26, 201214 yr comment_33438 John,Can't help you with the tiger maple, but wow what a beautiful shelf!SQHappiness is wood chips flying! Report
February 26, 201214 yr comment_33437 John,How much do you need in what thickness?My friend at church is a lumber/materials supplier and the company he works for deals with most of the hardwood lumber dealers and furniture manufacturers throughout Orange, Riverside, San Bernardino and Los Angeles Counties area. I asked him this morning and said that he could look into the tiger maple as he has some folks that would have it in the Los Angeles area but needs to know what you need. He has one guy who has logs that he cuts slabs in maple. If you could work with veneers then that is no problem as those are more readily available. So let me know.Allen WorshamCorona, CAallenworsham@earthlink.nethttp://www.awcreationsandwoodcrafts.com'Graze in every man's field, but always give your own milk' J. Vernon McGee Report
February 27, 201214 yr Author comment_33436 Thanks Harry! I checked em out, a bit pricey, but nice stuff!Harry Brink said:I have heard a lot of good feed back about www.woodworkerssource. It's listed on the Resources page here at TPW.Harry BrinkBulldog WoodworkingMontanaJohn MorrisThe Patriot WoodworkerProud Supporter of Wounded Warrior Project and Homes For Our Troops Report
February 27, 201214 yr Author comment_33435 Thanks Lew, same deal, a bit pricey with the shipping. You were right.Lewis Kauffman said:Here's a place but the shipping will probably make it prohibitive.Hearnes Hardwood Lew Kauffman-Wood Turners Forum HostTime traveler. Purveyor of the world's finest custom rolling pins!Lew Kauffman-Wood Turners Forum HostTime traveler. Purveyor of the world's finest custom rolling pins!John MorrisThe Patriot WoodworkerProud Supporter of Wounded Warrior Project and Homes For Our Troops Report
February 27, 201214 yr Author comment_33434 John and Ron, I contacted Kloes before you guys suggested, great minds think alike! I need to let him know exactly what I need, but I have a feeling the shipping might be much from there as well. Thanks guys.John Moody said:Kloes would have been my suggestion, but as Ron said the shipping may be a deal killer. He has a large supply though.John MoodySite AdministratorJohn Moody Woodworkshttp://www.johnmoodywoodworks.comJohn MorrisThe Patriot WoodworkerProud Supporter of Wounded Warrior Project and Homes For Our Troops Report
February 27, 201214 yr Author comment_33433 It'll be fun to build SQ! I'll keep some progress shots coming as I jump into it.SQ said:John,Can't help you with the tiger maple, but wow what a beautiful shelf!SQHappiness is wood chips flying!John MorrisThe Patriot WoodworkerProud Supporter of Wounded Warrior Project and Homes For Our Troops Report
February 27, 201214 yr Author comment_33432 Allen that is great! No veneers. But what I am looking for is about 48 bdft of Tiger, I can get curly at Reel Lumber but the Tiger is hard to find.If you could let him know I need Tiger in 7" width minimum. The width of the shelf is 6 1/2 inches. It is 48" high by 48" wide so minimum lengths are 60 inches. Thickness is 4/4, full 4/4 if possible, I'll mill it to my own thickness. Tell your buddy thanks for helping if he can!Allen Worsham said:John,How much do you need in what thickness?My friend at church is a lumber/materials supplier and the company he works for deals with most of the hardwood lumber dealers and furniture manufacturers throughout Orange, Riverside, San Bernardino and Los Angeles Counties area. I asked him this morning and said that he could look into the tiger maple as he has some folks that would have it in the Los Angeles area but needs to know what you need. He has one guy who has logs that he cuts slabs in maple. If you could work with veneers then that is no problem as those are more readily available. So let me know.Allen WorshamCorona, CAallenworsham@earthlink.nethttp://www.awcreationsandwoodcrafts.com'Graze in every man's field, but always give your own milk' J. Vernon McGeeJohn MorrisThe Patriot WoodworkerProud Supporter of Wounded Warrior Project and Homes For Our Troops Report
February 27, 201214 yr comment_33431 John,I sent him an email with the specifics as well as a copy of the image that you posted in this thread. I will let you know what he has to say. John Morris said:Allen that is great! No veneers. But what I am looking for is about 48 bdft of Tiger, I can get curly at Reel Lumber but the Tiger is hard to find.If you could let him know I need Tiger in 7" width minimum. The width of the shelf is 6 1/2 inches. It is 48" high by 48" wide so minimum lengths are 60 inches. Thickness is 4/4, full 4/4 if possible, I'll mill it to my own thickness. Tell your buddy thanks for helping if he can!John MorrisThe Patriot WoodworkerProud Supporter of Wounded Warrior Project and Homes For Our Troops Report
February 27, 201214 yr Author comment_33430 That's awesome Allen. Thanks for checkin on this for me.Allen Worsham said:John,I sent him an email with the specifics as well as a copy of the image that you posted in this thread. I will let you know what he has to say. John Morris said:Allen WorshamCorona, CAallenworsham@earthlink.nethttp://www.awcreationsandwoodcrafts.com'Graze in every man's field, but always give your own milk' J. Vernon McGeeJohn MorrisThe Patriot WoodworkerProud Supporter of Wounded Warrior Project and Homes For Our Troops Report
February 27, 201214 yr comment_33429 John,Here is the email that I got back from my friend Skip at church. These are the ones closest to you as opposed to being in the Los Angeles area. Hopefully you can track something down from one of them.--------------------------------------------------------------------------------------------------------Good morning Allen, Here are a few companies that should have this material. I was informed that this type of maple is usually culled from the units because most customers do not want it, and that it will usually be turned into a flooring product. Anjelo at Cherokee 909-920-5430 Erick at Weber 714-259-1100 Joe at Atlas 909-591-9442 One of these companies should have the material you are looking for. Have a good week! SkipAllen WorshamCorona, CAallenworsham@earthlink.nethttp://www.awcreationsandwoodcrafts.com'Graze in every man's field, but always give your own milk' J. Vernon McGee Report
February 27, 201214 yr comment_33428 I recently bought 50 bf from Bob Kloes and it was beautiful. He planned off mill marks at no charge and shipped it to me. It came in 3 days. He is a member of this site and i don't think you will find it cheaper anywhere. I paid less than $5 /bf. Locally it costs around ten. I will let him know about this post.Adam WelkerRed Car Construction and Fine Woodworking Report
February 28, 201214 yr Author comment_33427 Well that is an excellent price Adam. My client will be very happy if we could find some Tiger in this price range, even with shipping the savings on the lumber would offset the shipping. I have been in contact with Bob already and I am awaiting his reply to the price he is charging now for the tiger. Thanks all for taking an interest and thank you Allen. I am very excited to get into this project, it is going to look really nice. Adam Welker said:I recently bought 50 bf from Bob Kloes and it was beautiful. He planned off mill marks at no charge and shipped it to me. It came in 3 days. He is a member of this site and i don't think you will find it cheaper anywhere. I paid less than $5 /bf. Locally it costs around ten. I will let him know about this post.Adam WelkerRed Car Construction and Fine WoodworkingJohn MorrisThe Patriot WoodworkerProud Supporter of Wounded Warrior Project and Homes For Our Troops Report
.thumb.jpg.573d1497d0675219908c85aabefd797a.jpg)
Archived
This topic is now archived and is closed to further replies.