April 1, 201214 yr comment_31585 I'll get a review out in the next week folks, but I just wanted to boast a little.This was by far the best investment I have done in years for our shop.1. Noise is greatly reduced "No Load"2. Noise is greatly reduced "Under Load"I cannot believe how quiet my DeWalt 735 is now. This planer used to howl when I'd fire it up. Not now, you can barely hear it outdoors with my shop closed up. And even with one shop door open, it's no louder then a sander from outside.I am jazzed, and my wife and kids are jazzed too. No more noise telegraphing through the walls of the garage to the home like it did before.The cut, I have not sat down and trouble shooted the ridges yet. But I know once I take the time and reset the cutters that need it, it'll work fine, the ridges are barely visible, but I am expecting perfection in the cut so I just need to sit down and follow the steps in the trouble shooting section. I'll do that before I do the write up.Thanks for hearing my bragging!John MorrisThe Patriot WoodworkerProud Supporter of Wounded Warrior Project and Homes For Our Troops Report
April 2, 201214 yr comment_31593 Sounds like a quieter, more efficient machine, that combined with a happier family. Wow John that is the best of both worlds. No greater Loves than God, Family, Friends, country, the sight of flying chips and the smell of saw dust. Report
April 2, 201214 yr comment_31592 Sounds like a winner, John. It'll be interesting to find the culprit cutters.  Gene'The true soldier fights not because he hates what is in front of him, but because he loves what is behind him.' G. K. Chesterton Report
April 3, 201214 yr comment_31591 John - tell us more about this "Accu Head". Â Besides quieting the planer down, what else does it do, where can I see one, etc, etc, etc.Fredaka Pop's Shopwww.pops-shop.comEX-21'Don't complain about the storm - learn to dance in the rain.' Report
April 3, 201214 yr Author comment_31590 Fred, follow the link to view the exact one I got. Sorry for being so vague in my OP. The accuhead is a helical planer head for a surface planer.Here is the LINKFred Wilson said:John - tell us more about this "Accu Head". Â Besides quieting the planer down, what else does it do, where can I see one, etc, etc, etc.Fredaka Pop's Shopwww.pops-shop.comEX-21'Don't complain about the storm - learn to dance in the rain.'John MorrisThe Patriot WoodworkerProud Supporter of Wounded Warrior Project and Homes For Our Troops Report
April 3, 201214 yr comment_31589 Thanks for the link, John.Gene'The true soldier fights not because he hates what is in front of him, but because he loves what is behind him.' G. K. Chesterton Report
April 4, 201214 yr Author comment_31588 Thanks Russ, is sure is man. Everyone loves it!Russell Brechlin said: Sounds like a quieter, more efficient machine, that combined with a happier family. Wow John that is the best of both worlds. No greater Loves than God, Family, Friends, country, the sight of flying chips and the smell of saw dust. John MorrisThe Patriot WoodworkerProud Supporter of Wounded Warrior Project and Homes For Our Troops Report
April 4, 201214 yr Author comment_31587 I;'ll get to the cutters tomorrow night Gene. Hopefully I'll have some good news about the fix.Gene Howe said:Sounds like a winner, John. It'll be interesting to find the culprit cutters.  Gene'The true soldier fights not because he hates what is in front of him, but because he loves what is behind him.' G. K. ChestertonJohn MorrisThe Patriot WoodworkerProud Supporter of Wounded Warrior Project and Homes For Our Troops Report
April 4, 201214 yr Author comment_31586 You bet man!Gene Howe said:Thanks for the link, John.Gene'The true soldier fights not because he hates what is in front of him, but because he loves what is behind him.' G. K. ChestertonJohn MorrisThe Patriot WoodworkerProud Supporter of Wounded Warrior Project and Homes For Our Troops Report
.thumb.jpg.573d1497d0675219908c85aabefd797a.jpg)
Archived
This topic is now archived and is closed to further replies.