John Morris Posted October 1, 2017 Report Share Posted October 1, 2017 Grand Prize We are proud to offer a Woodriver No. 63 Low Angle Jack Plane to this months "What's It" winner. This months "What's It" is sponsored by our supporter Woodcraft Supply. Originally advertised as a plane for heavy stock removal across the grain, the No. 62 has found a home as a smoother and is quite popular among collectors. The WoodRiver® No. 62 is faithful to the original design, but is almost a full pound heavier at approximately 4.6 lbs. It features a body cast from ductile iron, with a bed angle of 12°, a bubinga tote and front knob, and a high-carbon steel blade with a 25° bevel. The plane measures a little less than 14" in length x 2-7/16" in width and has a 2"-wide blade. (Value $205.00) October "What's It" Basic Rules Reminder (For a full run down on this project and rules please go to: "The Patriot Woodworker and MWTCA "What's It" project") Only Patriot Woodworker Members are eligible to participate and receive the award. The MWTCA only accepts a verified source to support your answer, so one should be submitted with your answer, such as a patent, catalog entry, tool book reference, or a respectable website on the subject. Do not let these requirements prevent you from having fun and submitting educated answers on the subject without verification, we can worry about references later. All answers are welcome, as well as healthy debates regarding "What's It". If a verified and referenced answer is not arrived at by the end of each month's "What's It" project, a random draw will be performed for a "One Year MWTCA Club Membership". Only Patriot Woodworker's who participate in this "What's It" topic will be included in the random draw. Ok ladies and gentlemen, we now have our October "What's it" live and ready! The image(s) below is a MWTCA "What's It" image for you to research, and tell us all here in this topic post, just what the heck is it! Project details No further information provided, what you see, is what you have. Remember, "What's It" is not always woodworking related! Quote Link to comment Share on other sites More sharing options...
HandyDan Posted October 1, 2017 Report Share Posted October 1, 2017 I'm thinking it may be a vintage carvers vise for small items. MEBCWD and Grandpadave52 2 Quote Link to comment Share on other sites More sharing options...
HandyDan Posted October 1, 2017 Report Share Posted October 1, 2017 Looks long enough to carve a few flutes on it too. Quote Link to comment Share on other sites More sharing options...
Dadio Posted October 1, 2017 Report Share Posted October 1, 2017 Sure looks like a Safeway scaffold jack to me. Herb Quote Link to comment Share on other sites More sharing options...
John Morris Posted October 7, 2017 Author Report Share Posted October 7, 2017 Looks like this one got the membership all twisted up! This is all ya got folks! We even have an awesome award attached to this months teaser! Quote Link to comment Share on other sites More sharing options...
Chips N Dust Posted October 7, 2017 Report Share Posted October 7, 2017 Maybe a single screw from a plant press Quote Link to comment Share on other sites More sharing options...
John Morris Posted October 7, 2017 Author Report Share Posted October 7, 2017 29 minutes ago, Chips N Dust said: Maybe a single screw from a plant press I googled plant press Kelly, putting this What's It topic aside, I love the plant pressing art! Thanks for mentioning it here, it opened up a whole new world to me. Even incorporating pressed plants and the colors in woodworking, my mind is ablaze right now. Quote Link to comment Share on other sites More sharing options...
Roly Posted October 7, 2017 Report Share Posted October 7, 2017 Looks to me as some type of balance scale. If you note in the second picture you can see holes for moving the hook thing on the left side and what appears to be a slot for sliding the hook on the right side. I don't understand the three wooden nuts. Roly Quote Link to comment Share on other sites More sharing options...
Dadio Posted October 7, 2017 Report Share Posted October 7, 2017 23 minutes ago, Roly said: Looks to me as some type of balance scale. If you note in the second picture you can see holes for moving the hook thing on the left side and what appears to be a slot for sliding the hook on the right side. I don't understand the three wooden nuts. Roly I think those are steel nuts, Roly Maybe this is a spreader bar to hang up Hogs to shave them when slaughtering . Herb Quote Link to comment Share on other sites More sharing options...
HARO50 Posted October 7, 2017 Report Share Posted October 7, 2017 1 hour ago, John Morris said: my mind is ablaze right now. SOMEBODY CALL THE FIRE DEPARTMENT!!!!! John Quote Link to comment Share on other sites More sharing options...
Roly Posted October 7, 2017 Report Share Posted October 7, 2017 10 minutes ago, Dadio said: I think those are steel nuts, Roly Maybe this is a spreader bar to hang up Hogs to shave them when slaughtering . Herb I was calling the scaffold jack nuts as the wooden nuts, does not look heavy enough for a large hog. Roly Dadio 1 Quote Link to comment Share on other sites More sharing options...
Dadio Posted October 7, 2017 Report Share Posted October 7, 2017 2 minutes ago, Roly said: I was calling the scaffold jack nuts as the wooden nuts, does not look heavy enough for a large hog. Roly You are right about that , maybe Rabbits ? What is strange to me is that the large screw/ nut setup is way out of proportion to the bar, and clamps on the bar. It looks more like a homemade whodoneit. A bunch of junk thrown together to perform a specific task. I do that all the time, take what ever I can find laying around and slap it together for a one time jig. Quote Link to comment Share on other sites More sharing options...
Dadio Posted October 7, 2017 Report Share Posted October 7, 2017 Maybe a bracket to hold one end of a hammock . Herb Quote Link to comment Share on other sites More sharing options...
HandyDan Posted October 7, 2017 Report Share Posted October 7, 2017 2 hours ago, Dadio said: You are right about that , maybe Rabbits ? What is strange to me is that the large screw/ nut setup is way out of proportion to the bar, and clamps on the bar. It looks more like a homemade whodoneit. A bunch of junk thrown together to perform a specific task. I do that all the time, take what ever I can find laying around and slap it together for a one time jig. I do that quite often too. Dadio 1 Quote Link to comment Share on other sites More sharing options...
HandyDan Posted October 7, 2017 Report Share Posted October 7, 2017 I think the big wooden nut on the wood screw is original and the other two big wooden nuts are were made and added later. The smaller ones don't have the "patina". Quote Link to comment Share on other sites More sharing options...
MEBCWD Posted October 8, 2017 Report Share Posted October 8, 2017 On 10/1/2017 at 11:32 AM, HandyDan said: I'm thinking it may be a vintage carvers vise for small items. I think Dan is right, that was my first thought when I saw it. The two small nuts go under the bench, screw goes through a dog hole and the two nuts reinstalled. Two nuts adjust for height and act as lock lock/jamb nuts and the large nut is tightened to clamp it to the bench top and make angular adjustments. The long bar has adjustment holes for different size stock. Thumb screws adjust to hold the project. Probably used for items like cabriole legs but could be used for just about any item you want to work. steven newman 1 Quote Link to comment Share on other sites More sharing options...
Cal Posted October 8, 2017 Report Share Posted October 8, 2017 Mike, I am leaning more towards a type of measuring gauge. That long bar and thumb screw set up doesn't appear heavy duty enough to hold a piece good enough to do any work to it. Cal Quote Link to comment Share on other sites More sharing options...
Roly Posted October 8, 2017 Report Share Posted October 8, 2017 I was looking at it wrong as I think the parts with the loops on them are lock nuts for the screws not a place to hang something. Roly Quote Link to comment Share on other sites More sharing options...
Wil Posted October 25, 2017 Report Share Posted October 25, 2017 I believe this was used to stretch animal hides. Still looking for an image of sorts, but if home made not sure I can get one. Quote Link to comment Share on other sites More sharing options...
HandyDan Posted October 30, 2017 Report Share Posted October 30, 2017 I'll take one more stab at it. Could be a version of a craft paper, wrapping paper, wallpaper, etc. dispenser. Quote Link to comment Share on other sites More sharing options...
.thumb.jpg.573d1497d0675219908c85aabefd797a.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.