Search the Community
Showing results for tags 'scraper'.
-
Congrats to all of those who participated in this summer's annual fund raiser. Thanks for the donations and the help in keeping our site alive. As @Gerald pointed out last week, we are in the summer doldrums. Not much turning taking place. This week's post is all about videos. Hope you find something interesting among them. Our Patriot Turners- What’s Coming Up- Something from Todd Raines- Click on the image for the link to registration. For The Newbies- A bandsaw is probably the turners second most used power machine. Kent Weakley offers this video for Bandsaw safety. As turners, we typically reach for the "old standby" tool for a specific task. Turning a spindle? Spindle gouge. A bowl? Bowl gouge. Here are videos that use some not so typical tools for turning- Richard Raffan- Craft Supplies USA- Expand Your Horizons- August brings another installment of the "4 Ways" series. This month the topic is turning a wheel. From Tim Yoder- A short video on using colors to enhance your turnings- New Turning Items- From Mike Peace, a 6Pc M2 Cryo HSS Woodturning Tool Set Review- Everything Else- From Ron Brown's Newsletter- In A World Full Of Problems, Be The Solution- There is plenty to complain about every day. I am issuing a 7-day challenge: every day for the next 7 days address a problem that has been bothering you and implement a solution. Here are some common challenges that every woodturner faces. I bet you can think of plenty non-turning problems you can fix too. 1) If you are having difficulty because your tools need sharpening and you are not very good at sharpening them yourself, find someone to teach you how to sharpen them properly. If you need a sharpening jig, buy one and learn how to use it. 2) If you always get catches with a skew chisel, watch some YouTube videos or spend a minute with someone who knows how this tool works. Then practice until you can show someone else without getting catches. 3) You always get torn grain on the inside of a bowl and sanding to remove them takes forever. Watch some videos on shear scraping and practice until you can sand the surface beginning with 180-220 grit. You might have to learn to use a negative rake scraper to get the results you expect. 4) You would turn more but the wood is too expensive. Visit the owners of a tree service company and make a deal to get free green wood in exchange for a few salad bowls. This is a perfect solution when you have more time than money. 5) Your shop has so much sawdust that you can’t walk. Take time to sweep up the shavings and save them for your flowerbeds. Be careful with each dustpan full, there might be long-lost treasures (spur drives, sockets, T-handle Allen wrenches, scroll chuck jaws and/or screws!) 6) Your scroll chuck is hard to operate, open, or close. Take time to disassemble and clean your chucks and jaws. Re-oil and reassemble. 7) The banjo sticks and is difficult to move. Clean and wax the bed ways often. I prefer ceramic car polish. Turning green wood coats them with a lot of moisture. You might have to do this every day or two if you turn a lot of wet stuff. 8) Your tools stick and don’t slide on the tool rest anymore. Dress the top of the toolrest with a file to remove the nicks. This is basic maintenance. 9) Turned-lidded boxes are always a crowd favorite with threads or without. You can use exotic timber, branchwood, glued-up blanks, or domestic timber, they all look marvelous. Practice until you can get a suction-fit lid or, if you are up for the challenge, learn to hand-chase the threads. 10) If nobody participates in show-and-tell at your turning club, bring extra things yourself. If you have trouble getting guest presenters, volunteer yourself. These are obvious issues, but the point is that someone has to do something, it might as well be you. Safe turning
- 4 replies
-
- richard raffanmike peace
- sam angelo
- (and 22 more)
-
First time, for me, seeing this. Pretty cool.
- 7 replies
-
- stanley.number 70
- plane.
-
(and 2 more)
Tagged with:
-
We have a little over a month left in our summer fund raiser drive! Some great prizes from our very generous sponsors. Get your raffle tickets here- Our Patriot Turners- Please welcome back a forum member who checked in this week. Great to have @AndrewB posting again and getting all of us caught up with what he has been doing! @John Morris posted about a turning artisan he follows, Jarrod Dahl. Mr. Dahl's video created a question that got lots of responses from our group. Jump over to John's post and see if you can add more to the conversation- Another great week for our "On/Off Your Lathe" running post! From "On"- @Gerald's spalted maple plate. Beautiful wood and lovely shape! And from "Off"- Gerald showed us his finished sculpted lidded vessel. Talk about a beautiful work of art!! I can't imagine how much sandpaper he must have gone through!! Our gang gave him a huge thumbs up on this one! What’s Coming Up- Click on the images for links to more information and registration. Cindy Drozda's Tool Talk this Friday Cindy and Todd Raines Zoom Sharing Meeting- For The Newbies- When it comes to bowl turning, the grinds on a bowl gouge can be confusing. Which one is best? Which one should I use and where? Sam Angelo has some information that may help you answer these questions- Turning a bowl, box or any hollow type form requires the turner to know just how deep into the wood they can go before making the inside larger than the outside. Richard Raffan shows us how to make a simple tool to help with judging the depth. When hollowing out turnings with straight sides (i.g. boxes), the box scraper can help to make more precise cuts. Mike Peace takes a look at some of the advantages and disadvantages of some of the tools- Expand Your Horizons- Don't have a nice piece of wood to turn a larger project? Alan Stratton has the answer- New Turning Items- Woodturners Wonders has a sale on lighting. https://woodturnerswonders.com/collections/lamps?_kx=gV5SF2As_3IwtBi5TrpHVQM0F3UvGVbQKzhWGippDlk.VJvU8R Everything Else- Still working on those rolling pin blanks for a demonstration. Received the last of the wood an hour ago. Going to be in Leesburg VA at the Catoctin Area Turners club tomorrow evening for an Easy Wood Tools product demonstration ( @Jordan Martindale ) Safe turning
- 5 replies
-
- woodturners wonders
- cut offs
-
(and 25 more)
Tagged with:
-
Was covered in dust and crud...View #1 View #2... There is a thumbscrew...that secures the iron.. One end of the "iron" is more like a cutter from a hand plane, however.... Along one side of the iron..there are these profiles.. Not sure what this is for...no markings to be found..
-
Our Ward 57 project was a complete success. Congrats to all of the raffle winners. Sure hope we get to see some pictures of the kids opening their presents! Writing this on Tuesday as Mimi is scheduled to have here right knee replace tomorrow. She had the left one done about a year ago. I'll be on nurse, cook, laundry, dog sitting and general all around house husband for then next couple of weeks. Our Patriot Turners- @jthornton posted a couple of things this past week. First is his segment jig- As often happens, the best laid plans of mice and men... anyway, he discovered the accuracy wasn't spot on. He tells us more in his post- JT went on to show us what he does with the segments he makes. This is an awesome bowl! Check out his post for more images and a little about the build- What’s Coming Up- Registration is at https://streamyard.com/watch/KGRprAZsAGQU More information here- https://woodturner.org/Woodturner/Virtual-Events/Emma_Cook_Resin_Inlay_Platter.aspx For The Newbies- Reverse sanding can be useful but it comes with some possible problems. Mike peace explains in this video- Do you use a scraper when turning? Richard Raffan shows us how to hone it for the best cuts- Expand Your Horizons- I get a lot of turning notification form various social media accounts. One from Sam Angelo popped up covering his home made finish. I was curious about food contact. Sent him a message but haven't heard back. Here's his video- It worried me about the turpentine. Did a little more digging and found something I didn't expect in a post by Kent Weakley. About have way through the article there is information comparing Linseed Oil to Boiled Linseed Oil. I'll let you decide about what/when you use the ingredients- https://turnawoodbowl.com/my-favorite-food-safe-wood-finish-waterproof-almost/ Another social media article popped up about the difficulty between turning large bowls vs. small bowls. Most of the respondents felt small bowls were more difficult. No one told Richard Raffan that! A beautiful maple burl bowl from Tim Yoder- New Turning Items- Couldn't find anything new but I did notice that Niles Bottle Stoppers have added some Yorkshire Grit products. Our generous sponsor Easy Wood Tools ( @Jordan Martindale ) is now the US source for this great sanding finish! Everything Else- Rick Turns list of YouTube woodturning videos from last week- Got to play at the lathe the other day. Everyone was making those Gnomes/Gonks. I got this idea that they should be more than just a shelf setter. Turned this one from maple and walnut. The "fur" is from Hobby Lobby. I found some of the original Niles Bottle stoppers hidden in a box. Wine bottle stopper Safe turning
- 11 replies
-
- easy wood tools
- gnome/gonk
- (and 19 more)
-
Last day of August! Where did the summer go?!?!? Our Patriot Turners- Our turners have been busy this week! @Gerald posted about a novel idea for embellishing a turning. He describes the materials he used and how he obtained the neat colorization in his post- @Gunny posted this in the "What's on tour weekend agenda"- Gunny has these down to an art! @forty_caliber finished up a bowl he started a while back. The grain and color in this one is incredible! He explains the name in his post- @RustyFN posted his beautiful Calabash bowl. He received lots of positive comments and @Gerald was kind enough to post a couple of his bowls for comparison. What’s Coming Up- Hold onto your hats- lots coming up in the near future! A bunch from the AAW. Click on the images for links and information. For The Newbies- Jim Rodgers continues his instruction on how/why catches happen. In this one, Jim discusses the scraper- Expand Your Horizons- Mike Waldt turns and embellishes an ash hollow form- ...and a Yew lidded box Seems we have been really concentrating on making scoops. Another idea but quite different than the previous designs- New Turning Items- SWAT was this past weekend. Cindy Drozda took the opportunity to video many of the vendors and their products. She was live on several occasions. She has posted some of the material on her YouTube Channel. The link to her channel- https://www.youtube.com/user/cindydrozda Craft Supplies USA is having a closeout on a bunch of their products. Some good prices! https://www.woodturnerscatalog.com/Sales/20/Closeout?utm_source=csusa&utm_medium=email&utm_content=closeout&utm_campaign=22-08-closeout Woodturners Wonders Weekly sale: https://woodturnerswonders.com/collections/weekly-sale A couple of weeks ago we mentioned the 3M Xtract sand paper. Taylor Toolworks is currently having a sale on the product- https://taytools.com/collections/3m-xtract?afmc=17p&utm_campaign=17p&utm_source=leaddyno&utm_medium=affiliate Everything Else- Rick Morris must be on vacation this week- He didn't post his usual list of turning videos. Tim Yoder is always a lot of fun to watch- I've been kicking this idea around for a while. Usually, when I make a lidded container, I will use contrasting species for the lid and body. Some things like pepper mills are made from a single piece of the same species. Cutting the blank in half and then creating a tenon can cause a noticeable grain mismatch where the cut/tenon is created. I was watching one of Cindy Drozda's live tool talks and she described a technique that minimizes the material loss and grain mismatch. After cutting the blank, it is glued back together with a sacrificial piece between the halves. This sacrificial piece becomes the tenon. My first attempt at this was a miserable failure. The cuts were not clean enough to create a good glue joint. I'm thinking I need a way to ensure the pieces will look seamless when mated together. My next try was a little better. The first thing was to create a sharp cut with no tear out. I forgot to take a picture in my haste but I used a skew chisel to start the separation cut. Then used my freshly sharpened, shop made, thin parting tool. Also cranked the lathe speed way up to part off the pieces- I did not create a tenon. Instead, I decided to turn tight fitting plug that would be used as the lid tenon. Mortice in one end- Fitting the plug Glue the plug into one of the mortices- the lid on this one. Trim the plug so the two halves fit together- Carefully hollow out the insides making certain not to touch the plug mating surfaces. I did not spend a lot of time sanding the inside. My main goal was to see if the plug idea would work. Some sanding on the outside and testing the grain match- Had to play a little to fancy up the very plain shape- I think this will have a much great effect when used on highly figured wood. This was from a very old piece of air dried walnut. Quite brittle. Safe turning
- 3 replies
-
- wednesday
- wisdom
-
(and 32 more)
Tagged with:
- wednesday
- wisdom
- woodturners
- platter
- wine glass
- copper
- bowl
- calabash
- wit
- helga winter
- emma cook
- kitchen
- scott hampton
- cindy drozda
- lidded chalice
- lidded hollow
- jim rodgers
- catches
- scraper
- mike waldt
- deading
- hollow
- yew
- lidded box
- alan stratton
- scoop ladle
- vendor swat
- craft supplies usa
- woodturners wonders
- 3m xtract
- taylor woodworks
- tim yoder
- tenon
- lid
-
Beautiful day today, 67° and sunny. Tomorrow, winter weather advisory. Ahh, spring time in PA. Our Patriot Turners- @BillyJack asked our members for input on some turning tools. Several gave their recommendations on what he might consider. I hope he posts the tools he gets so we can all drool over his choices! @Gerald gave us a look at some of the turnings that were done at the last club meeting. Gerald posted several more images of turnings that were done during the demonstration. Gerald said their guest demonstrator was Matt Monaco. If you do Instagram, here's a link to Mr. Monaco's page- https://www.instagram.com/monaco_bowls/. Gerald also posted some images, in response to some thoughts from last week's "Wednesday's...", showing some of the embellishments he has done using various tools. See this post for more pictures- I appreciate Gerald's willingness to share his knowledge with all of our turners. What’s Coming Up- Click on the images for links and more information. From the AAW- From Lyle Jamieson From Cindy Drozda- Not sure if you need a Facebook account to view this presentation- For The Newbies- From the AAW, a short video on sharpening- Mike Peace continues his series on lathe drilling. This video discusses drill bit selection- Expand Your Horizons- Cindy Drozda is asking for input on IRD content. She has developed an anonymous online questionnaire. Maybe you could help her by responding. Here's the link- https://us18.list-manage.com/survey?u=4fd7472bedaf1b07e398a732a&id=73c2cb5054&attribution=false Cindy also uploaded a video of the equipment she uses to do her IRD's and training videos. If you have thought about getting into this area, maybe her experiences might be helpful- Alan Stratton finishes up his series on the eccentric chuck and turnings with a video on making his chuck. Carl Jacobson turns a vase with an off-centered lid- New Turning Items- From Ruth Niles' latest newsletter- Click on the image for ordering. From the folks at Woodturners Wonders- FREE Shipping! https://woodturnerswonders.com/collections/new-products/products/powermatic-3520c-lathe-100th-anniversary-edition Everything Else- Rick Turns list of YouTube woodturning videos from last week- No turning for me this week. As the old saying goes- "No good deed goes unpunished". One of those-"if we supply the lumber will you donate your time". A little Free Library for the local state park- Just getting to the roof when the spring pin, in the table saw trunnion worm gear, decided to fall out. Of course everything had to fall down into the dust collector hose. It's a wonderful day in the neighborhood... Safe turning
- 3 replies
-
- ruth niles
- stopper blanks
-
(and 28 more)
Tagged with:
- ruth niles
- stopper blanks
- off center
- carl jacobson
- eccentric chuck
- alan stratton
- scraper
- negative rake
- survey
- drill bits
- mike peace
- video
- sharpening
- video equipment
- cindy drozda
- goblet
- lyle jamieson
- aaw
- chris parker
- embellish
- matt monaco
- tops
- lathe tools
- question
- woodturners
- wisdom
- wednesday
- woodturners wonders
- lathe
- rick turns videos
-
Hard to believe but only two more days left in April! Really looking forward to summer weather. Our Patriot Turners- @Gerald gave us a peek at his shop made parting tool. Unlike a lot of parting tools, this one cuts cleanly. Gerald explains how he created this tool, in his post- @RustyFN posted his almost completed combination bowl. This one is a beauty and combines multiple disciplines. Rusty got lots of positive comments on his work. You can read them in this update to his original thread- Rusty also provide a bit of sage advice. It is self explanatory- @AndrewB is finishing up a pepper mill in which he combined 2 species. They really look nice together- Andrew explains more about this turning in this posting- Andrew also mentioned his wishes to improve his dust collection. Maybe you have some ideas that he could incorporate. What’s Coming Up- Click on the above image for the link to registration For The Newbies- Sanding is one way to remove tool marks. However, a better way is to avoid them as much as possible. Here's a video explaining the possible causes of the marks and what you can so to help reduce them during the turning process- This is another video in the beginners series, from Mike Waldt. This one on scrapers, negative rake grinds and parting tools. It's rather long as it is from his live presentation.- Although aimed at the Record Power Midi Lathe, most of the maintenance tips in this video can be applied to just about any lathe- Craft Supplies USA has been publishing a beginners series of woodturning videos by Dale Nish. This one is turning a bowl from a dried blank- Expand Your Horizons- Lyle Jamieson shows us the thought process for designing and turning a natural edge hollow vessel. The other week we posted some information on purchasing already made wooden threads for lidded projects. With a little practice and a couple of tools, you can create them yourself, as Mike Peace explains- Within Mike's video, he references this from Allan Batty New Turning Items- Couldn't find anything interesting this week, so hang on to that stimulus check! Everything Else- Tim Yoder is having fun with this project to be gifted to a friend Rick Turns' list of woodturning YouTube videos from last week- I finished up the little natural edge bowl I had been messing with. I like the shape but I think I can do better by using less of the logs diameter and making the piece a little longer. I think that will give the piece a flatter more pleasing look. Anyway, used wipe on gloss poly for this one. I'm getting better at making the walls thinner, too. Safe turning and stay well
-
A little longer post this week. Was away last week and didn't have access to my weekly list of stuff to post. Our Patriot Turners- @RustyFN posted a picture of a bowl he started for a continuing project with the turning club in which he is a member. Rusty showed us a picture of what will be added to this turning, during a future club meeting. Turning can be a messy hobby. Rusty posted some of his by-products- @AndrewB continues working on pepper mills. In this post, he shows us one of his maple mills assembled and finished- Andrew also gave us a look at one he had posted previously and is now complete- Andrew started a conversation about beading tools. Beads can be made with a variety of turning tools, however, some projects are more conducive to a dedicated tool. How do you turn your beads? Check out the conversation and give us your ideas- Andrew also spent some time perfecting this sharpening techniques. He showed us his success on a scraper. He received lots of positive comments @Bob Hodge asked about making our own tools using a specific material- "Tantung". If you have any experience with this material, maybe you could pop over to his post and chime in- @Ron Altier dug up an older post that introduced us to the products of our sponsor- Easy Wood Tools. As they say, imitation is the sincerest form of flattery. From all of the other carbide products on the market, @Jim from Easy Wood Tools should be feeling pretty good about starting it all! What’s Coming Up- Click on the above image for the link to registration. Click on the above image for the link to more information and registration. Sponsored by Craft Supplies USA. Click on the above image for more information. Not exclusively for turners but there are turners involved. Click on the above image for more information. For The Newbies- I make no secret about it- I hate sanding. Mostly because I suck at it. Here is some information to help us all improve on our techniques- WF0501p19-21.pdf Andrew mentioned he sharpened his scraper. He received several comments on different techniques. I found this article describing some of those techniques- https://turnawoodbowl.com/scraper-sharpening-bevel-angle-burr-how-to/#:~:text=Some people recommend a 85,to 60-degree bevel angles A video from Mike Waldt on the roughing gouge and spindle gouge. Another in the series for beginners. This is a replay of a live program. It is quite lengthy- Pens are really nice, well received gifts. I've turned lots of them over the years. If the pen is for an older person, as was the case with my Mom, sometimes they have a hard time holding the more delicate (slime) styles. A nice design for arthritic hands- Turned kitchen items are always appreciated. A nice article for turning mixing spoons- https://community.woodturner.org/HigherLogic/System/DownloadDocumentFile.ashx?DocumentFileKey=4ce49ef3-df90-46ee-a6a3-23b92152f2f3&forceDialog=0&_zs=ceDib&_zl=AcdW2 If you are thinking about investing in some Easy Wood Tools, Here is a short video on their use- Expand Your Horizons- Andrew's post on beading tools, and some of the responses led me to this web site. I don't think it would be possible to create these works of art without the aid of a dedicated beading tool- See more of Mr. Meyer's work at http://www.harveymeyer.com/ While Mr. Meyer's is the epitome of geometric shapes, sometimes mother nature can rival this beauty with the organic shapes of spalted wood. You may be lucky enough to obtain naturally spalted pieces. If not, you can help mother nature along- An interesting bowl project. Two bowl blanks make one bowl. A two part video- New Turning Items- You say you want to use wooden threads on that container you just made? But you don't have a pair of Thread Cutters? Not a problem! Ron Brown has you covered! Everything Else- The past two weeks of YouTube videos from Rick Turns- Woodworker's Journal post of Woodturning Monthly- https://www.woodworkersjournal.com/woodturning-monthly/?utm_medium=email Played a little with a piece of the mulberry. The first turning didn't turn out anywhere near the vision in my head. This one is a little more like what I had in mind. I need to get better at centering the the workpiece. The wall thicknesses around the natural edge vary from 1/8" to almost 1/4". I'm still starting with a piece that's too "thick" to get a "flatter" turning and keep the natural edge. Safe turning and stay well
-
Lots happening with our turners this week... Our Patriot Turners- @FrederickH posted a project in the woodworking section. He is making a box for his lathe chuck/jaws. From all the comments and ideas, I thought maybe our turners would like to see what he made and all the other ideas form his post- You can see the build and how he finished the inside to hold his chuck- @Smallpatch showed us his in progress steady rest. Looks like it is going to be a nice one too- Jess' post contains images of his build, lots of comments from our group and some great music! New member @bradleyheathhays asked for our opinion on a lathe he is considering buying. Check out his post and maybe you can provide some input to help him make a choice- @RustyFN has been really busy in his shop putting that new lathe through its paces! Rust is trying some outboard turning by making a large bowl/platter- Lots of great comments on this one- Unfortunately, not every one of Rusty's projects came out as planned. His efforts in turning a winged bowl were all for naught- I think we've all been there, and our members were sympathetic- While Rusty was working, he tried a new tool, for him. He used a round nose scraper which lead him to post a question to our members. As always, our turners had super advice- As is often pointed out here in the Woodturners forum, there is no substitute for learning from an experienced turner. Books and DVD's are helpful but the interaction between teacher and student cannot be overstated. Rusty proves that point in his post describing his experience with his first turner's club meeting. @AndrewB Finished up his new lathe workbench and started in on another pepper grinder. This one is a real beauty. Andrew is getting these down to a science! Check out his post for the production images as his project progresses. What’s Coming Up- Click on the above image for the link to more information and registration. Click on the above image for the link to more information and registration. Want to make your own Blues Bowl instrument? Andrew Hall (the "Hat Man") will hosting a workshop this spring- More information here- https://www.hallwoodhats.com/index.php/purchase/the-blues-bowl-sessions For The Newbies- Rusty's post on scraper generated comments about well known turners and some of their educational materials. Here are some links that will flesh out some of the comments- https://www.robohippy.net/videos-test Reed Gray (aka Robo Hippy) has some great scraper videos. Scrapers from Stuart Batty- Spring is here! For your gardening friends, a nice little project from the AAW Sanding tips from Mike Peace- Getting a fluid curve on the outside of a bowl makes the difference between a nice bowl and an awesome. Here Lyle Jamieson show us a trick to help obtain that curve- If you are thinking about setting up a sharpening station for your lathe tools (or other cutting tools), this video from Axminster has some useful information. NOTE: this video is quite long!!! Expand Your Horizons- A couple of weeks ago, Rusty showed us his segmented bowl. I thought this modification has possibilities for some interesting designs- Rusty's work with a winged bowl happened in the same week as this video was posted- Nick Cook turns a gorgeous coffee scoop (AKA Robert Sorby) @Steve Krumanaker makes some beautiful bird House ornaments. How about some full sized versions for our feathered friends- AW1201p14-18.pdf New Turning Items- This is not a new item but it's a little different from others I've seen. It is from Axminster- https://www.axminstertools.com/us/woodcut-pro-mount-carving-stand-105257?glCountry=US&glCurrency=USD Woodturners Wonders has Rikon items on sale. https://woodturnerswonders.com/collections/sales Everything Else- Rick Turns YouTube video list from last week- I finished up the last piece of nice cherry. Someone actually asked to buy it! Safe turning and stay well
-
I used a scraper for the first time today. I have one that is around 3/4” round nose. It came in a Benjamin’s Best kit I bought years ago. I sharpened it and tried it and liked it a lot. Thinking about buying a good one. Thinking about a 1” with a curved left side. Looking for opinions and good brands.
-
Hope this finds all of you and your families safe and well. The weather here has been beautiful. Even had an awesome thunderstorm last night. Our Patriot Turners- @FrederickH managed to score some really nice turning tools and asked our members their opinions. Check out his post and see if you can provide some additional advice- Most of us have been asked to stay at home during this health crisis. One of the other forums, at the Patriot, is showing our members' quarantine project. @John Hechel posted a beautiful walnut bowl! John says it is his first ever bowl! Wish my first one turned out that nice!!! Check out his project- and other posts at- New member @Purpleheartguy posted some of his turnings in our gallery. He is just getting into turning but it looks like he sure has a knack for it. You can see his other images in the gallery beginning here- @FlGatorwood is turning his first inside-out ornament! He gave us a sneak preview of what it is going to look like! Check out his post at- What’s Coming Up- The Mid Atlantic Woodturning Symposium is still planning to hold their event in September. Click on the above image for the link to their site and more information. As we mentioned last week, our sponsor- Woodcraft- is hosting a Turning Tuesday event each week. If you didn't catch it, Frank Byers demonstrates turning some garden tools. For The Newbies- @Purpleheartguy mentioned in his turning posts that he didn't own a chuck. Yet he turned some beautiful pieces with the tools he had. Here's a video from Mike Peace showing how to create a bowl, on the lathe, without a chuck. There are several videos on YouTube on how to do this- There's always some questions about what's the best way to dry green wood for the final turning. I found this video from Woodcraft San Carlos where the presenter discusses several methods. Easy to understand. Note: Use you wife's microwave at your own risk Negative rake scrapers can be helpful in getting clean cuts and less catches. Sam Angelo has a video demonstrating their use, sharpening and why you might want to consider adding one to your turning arsenal. Expand Your Horizons- Mike Peace has a nice video showing how embellished an ash bowl. Not your typical finish. New Turning Items- If you like the idea of having one handle to be able to be used with a variety of lathe tools, this may be something you cam use- You can see more at- https://woodturningtoolstore.com/modular-woodturning-tool-handle-new-product/ Everything Else- Rick Turns posted his March list of YouTube woodturning videos. Please take a moment to give him a thumbs up, acknowledging his hard work. @Purpleheartguy's comments got me to thinking about some of the chucks I've made. A very useful one is simple a piece of hardwood drilled and threaded to match the headstock threads. Then a piece of scrape glued to the face. The scrape is a sacrificial piece to which the project is glued. Another really useful one is the Longworth chuck. It can be used for reverse chucking a bowl to finish off the bottom. I used the same type of drilled/tapped hardwood block for the mounting portion of the one I made. Sometimes you can get lucky and find a used tap, that matches your lathe threads, at the surplus store. Safe turning and stay well
-
It was more than a hunnert dollahs It was the Glen Lucas one. Anyway I was jonesing to try it So I got myself a hunk of cheap steel bar 3/8" x 1" And I rummaged up a half inch hunk of hardened High speed Steel ( a metal lathe tool bit) TIG Welded 'em together and got this
- 21 replies
-
I've had these forever. They was with my grandfathers tools. I have no idea what they are or what they are used for. Both made by ANDERSON BROS MFG. CO. Both have a slide on them. Both look like a file with no teeth. No sharp edges anywhere.
- 15 replies
-
- anderson bros mfd.
- file
-
(and 1 more)
Tagged with:
-
I have been watching a lot of videos on youtube. It seems like everybody that uses a Scraper ends up with a lot smoother finish before sanding. Does the Scraper really give you a better finish and less sanding? It is worth getting one? Thanks
-
One of my goals in my work, is to avoid using a sander. I have heard such great things about these scrapers, I went and purchased the rectangular and original scrapers from https://www.stewmac.com/ These scrapers will be used for my chair back slates and arms, and of course any other flat or curved work that demands a fine surface. I'll review them first chance I get! The Original below The Rectangular/Concave below A short video on the inventor and how to sharpen this scraper.
-
I was going back and forth over scrapers. I thought maybe I really liked a Glenn Lucas negative rake scraper. Then I saw a Kelton tool. It's got a little pivot. I had a Sorby scraper blade. so I made a Kelton type drop edge tool
-
I love visiting our sponsors "Woodcraft Magazine" site, it's such a cool place to peruse and just hang out, and it looks great! Here is a cool jig I found, thanks Woodcraft!
-
After using one of these in a friend's shop I had to have it. An excellent tool, easily sharpened and fairly inexpensive. Stew Mac
-
And a couple old rusty tools. Found an 18" long Craftsman Backsaw for a dollar bill. And, a Stanley #70 scraper plane. The saw can wait a while, until I have the right sized files to sharpen the DULL teeth with The Stanley #70: It has a curved sole and a cambered iron. Used to scrape off painted labels on wooden shipping crates. This one was very nasty looking. Wire wheels on the Drill press to clean most of the crud and rust off. Gave the iron the once over. Might have used the force, too The chisel came from FeeBay, an Eagle Brand 7, 1-1/2" socket firmer chisel. It needed a handle, and this was all I had on hand. I might try to see what I could turn, if I knew what the original looked like. Stanley #70 had a surprise when i cleaned up the iron, under the "STANLEY" there was a heart with the letters SW inside. The so-called Sweetheart era. handle got a good clean up, then a BLO/Varnish coating. Not too bad a day Tried to upload a few of the finished photos......NADA