Search the Community
Showing results for tags 'ringmaster'.
Found 16 results
-
Just a few bowls for the parent-type's 65th anniversary get together. A bread bowl from teak with a walnut foot. Then two same but different candy dishes. Both teak and mesquite. Just a little shuffling of rings to put the accents in different locations. Was hoping for a bit more color contrast but not too bad as is. Thanx for looking.
-
Back from the beach. For those who can relate: Wife and Dog necessities- Navy veteran- Our Patriot Turners- @forty_caliber has been working on some calabash bowls- Love the grain in this one. And another one- Forty also showed us a gorgeous shaving brush turning- @Headhunter posted some more of his beautiful segmented turnings in our Ringmaster subforum- Check out his post for more examples! We've had some more comments in our on-going thread "What's On Your Lathe" and @Gerald posted his cool Dice Cups! I'm gonna have to have him teach me how he gets those spirals/cross hatches so evenly spaced! What’s Coming Up- The AAW symposium starts tomorrow! Check our post from 2 weeks ago for the Virtual Signup. Also, you can see some of the goings-on from Lyle Jamieson (and Mike OB), Joe Fleming, and Cindy Drozda. They will be live at the AAW Trade Show. Tod Raines and Steve Worcester will be at their shops in Texas. They'll all be on the Vendor Showcase Live Stream!! Don't miss it! Friday, June 2nd, 3:30 pm Eastern (19:30 UTC). It's FREE! https://streamyard.com/watch/HPPX7NfwzCzN?fbclid=IwAR1Uyxj3nbHf-v1JR55ZeXuu8ugsGIfV6a8LrVlA4Qd0oa2sZtnE-G7jN4w https://www.youtube.com/@Lyle/streams For The Newbies- Keeping the Morris taper, on your lathe, clean will assure a solid grip. You can purchase a cleaning tool or make one. Jim Rodgers shows us how- Do you use paper towels to apply finish? Tired of cutting them into little square pads? Mike Peace has a solution- Baby rattles are fun to make. This video from Craft Supplies USA gives us step by step instructions and several ideas on different shapes- Expand Your Horizons- In our last post, we listed several videos on making kitchen utensils. Richard Raffan demonstrates how to turn a spatula using my old nemesis, the skew! Mike Waldt turns a beautiful cherry goblet from a log- New Turning Items- Our last post had a review, by Mike Waldt, on the Woodcut Max 4. This is a follow up and Mike answers some questions about the product. Another coring product from Hunter. The Hunter Korpro Cartridge that retrofits onto the existing OneWay™ coring system. https://huntertoolsystems.com/product/coring-cartridge/ This vide, from Mike Peace, shows it in action- The Vendor's Showcase, listed above, may reveal some new items. Check it out! Everything Else- No shop time for me. still trying to catch up with all of the phone message requests while we were away.
- 4 replies
-
- 2
-
-
- oneway coring system
- hunter korpro
- (and 23 more)
-
Third day of May here in South Central PA- Sleet on the back deck this afternoon! Our Patriot Turners- @jthornton Is giving us a great tutorial on how he does his his "dizzy bowl". He has uploaded process shots, with explanations, in his post- @Headhunter got us caught up on some of the things he has been making. Make sure you see all his stuff by subscribing to our "Ringmaster Turning sub-forum". His work certainly has some gorgeous patterns! He posted lots mor pix here- @Fred W. Hargis Jr posed a question about lathe speed fastest rpm. Several of our members provided their thoughts. Why not hop on over to Fred's post and give him your thoughts- @Masonsailor is taking a little break from his laundry room project to make a bowl. Paul explains the materials and the purpose of the turning, in his post- We've had several additions to our "What's On Your Lathe"! This is where we left off last week- What’s Coming Up- Click on the images for links to more information and registration- For The Newbies- Richard Raffan explains the shear scraper- I think this happens to us all. Sometimes more than once. Whether you're a newbie or experienced turner- Expand Your Horizons- Something from Tim Yoder- In my own turning, it seems my bowls don't have much variation is shape/design. Ernie Conover shows us examples of different bowl shapes. Being the first of the month, Sam Angelo, Mike Peace, Richard Raffan and Tomislav Tomasic have put together the "4 Ways" videos. New Turning Items- This is not new but a chance to have input on the design of a relatively new product- If you would like to submit input, the email address is- nilesstopper@gmail.com Everything Else- An interesting read from Ron Brown's newsletter- “Dividing up the budget is a zero-sum game.” Don’t live your life like it is a zero-sum game. When you give encouragement to someone, your optimism bottle won’t run out. When you teach someone about lessons you’ve learned, your box of skills is just as full, and likely even more full. When you gift a nice piece of wood to someone, you can be sure there is another one headed your way, probably even nicer. I have a few special methods in my manufacturing processes, and the more I help others, the more I am helped. That is simply the law of sowing and reaping. If you want better tools, start giving some tools away! If you want to turn better pens, teach someone who wants to learn to turn pens; amazingly, you will begin to make better pens yourself. If you want more friends, be friendly; invite someone to coffee, breakfast, or lunch. Try hosting a small impromptu-turning get-together for 2 or 3 folks at your shop. One of the paradoxes in the life of a turner is how quickly turned items multiply! You make a few bowls, pens, or Christmas Ornaments, and the next thing you know they are everywhere. There is literally not room enough to contain them. You think about selling a few after you’ve given every relative, friend, and neighbor something you’ve turned, and still, the turnings keep multiplying. They are like Tribbles (Star Trek reference) only real. My encouragement today is to not be afraid to give to others. It really doesn’t mean you will have less, in fact, you will get more. Remember that wherever you go, there you are. A little lathe time for me. A couple of natural edge bowls from a flowering cherry tree limb. Not quite finished. Pulled the elm platters from the soapy water soak today and placed them in the drying box. Pretty ugly looking rite now. Probably take about a week to reach equilibrium. Safe turning
- 7 replies
-
- 3
-
-
-
- ron brown newsletter
- bronze threads
- (and 25 more)
-
Remembering all my Brothers and Sisters on this 50th anniversary of the end of the Vietnam War, Welcome Home. Our Patriot Turners- @Headhunter posted some of his Ringmaster turnings in our sub-forum. Thought it would be nice to share them with the entire group. He also posted an awesome open segment turning. Headhunter was kind enough to add a photo of how he created the blank to create this beauty. @forty_caliber Has bee working with some spalted pecan. I really like the way he embellished the rim of this bowl- Check out his post to see what our turners had to say- Forty also posted an inquiry asking if any of our members had any experience with a specific type of knot/gap filler. Please check out this post and offer any additional help- Can't express how happy I am to see everyone adding to our continuing thread of "What's On Your Lathe"! Some of the recent additions include- This is about where we left off last week- What’s Coming Up- Click on the images for links to more information and registration- For The Newbies- Found this article that compares these tools. https://turnawoodbowl.com/carbide-vs-traditional-hss-wood-turning-tools-high-speed-steel/ Alan Stratton's video on turning a box from tree to display. To add interest to the turning, Alan burns some detail lines. Check out his wire burning tool at 9 minutes- Expand Your Horizons- Carl Jacobson turned a small lidded box, and used the urn threaded rings. This was a live demonstration so it's a little long- Mike Waldt turns a hollow Mulberry hollow form- New Turning Items- Couldn't find anything new but checkout this week's Vendor Showcase (link above). Not sure what they will be doing. Everything Else- From Ron Brown's newsletter- Driving A Stake In The Ground Sometimes progress seems so slow that you have to drive a stake in the ground to see if you are moving. I first heard this phrase when I worked on the railroad as a long-haul trainman. The first half of our route took us from near sea level over a 4,000 foot high mountain range. Sometimes I could run alongside the train faster than it was moving! Developing our skills can be a lot like that. You want to be able to use a skew chisel like they do on YouTube and roll perfect beads, disks, and wonderfully symmetrical coves. But you get catch after catch and it seems like you are never going to figure it out. Or the grain tears on the outside of your bowl blank even with freshly sharpened tools. You wonder if you will ever be able to start sanding with 120 grit or higher rather than 60 or 80 grit. You look forward to the day you don’t have to spend so much time sanding. Practice makes perfect because each time you try, you get a little bit better. You develop muscle memory whether you know it or not. Suddenly, or so it would seem, you can roll a beautiful bead with that skew and not get a catch. Where is the stake now? I used spinning tops as my demonstration canvas on the Woodworking Show Circuit for 13 seasons. I glued up 1,200 top blanks at the beginning of each season and more when those ran out. All day long I would load a blank into the lathe’s collet chuck for my next demo. I used a skew to turn the disk to round in less than 3 seconds. Then I shaped the disk in preparation for texturing. That took another 10-15 seconds, one pass on the front, and one pass on the back. In one continuous motion, I shaped the stem using the same spindle gouge I had shaped the front and back of the disk. Then I made 3 cuts with the texturing tools and finished with various color combinations. I had developed so much muscle memory that I could carry on a lucid conversation and make the top at the same time. Elapsed time, less than 5 minutes including all of the decoration and coloring. It didn’t start out like that, but after the first thousand tops, it got easier. I’ve told you before that you don’t really know how to make something until you made 50 or 100 of the same thing. Then you begin to understand but still have much to learn. So, drive that stake in the ground, metaphorically, and watch as you get better each time you try again. Remember that wherever you go, there you are. Safe turning
- 4 replies
-
- 2
-
-
- ron brown newsletter
- hollow form
- (and 24 more)
-
Can you believe it? November already!! Our Patriot Turners- @Steve Krumanaker Finished up his turned, carved and pyro embellished platter. It is incredible- Check out this post for other images and the positive comments from our turners- Steve also showed us some really special ornaments he turned from his scrap bin- I really love these birdhouses! Included in his post is an image of some really nide ornament display stands. Check it out- @Ron Altier created an angular ornament that has some lathe work, too. Ron shows us how he created the pyramid shaped top- @RustyFN finished up a beautiful pecan bowl. Really spectacular grain patterns- See his post for more images @Headhunter spent some long awaited quality time at the lathe using his Ringmaster tool. Looks like he has lost any of his skills while away! These are some real beauties!! Check out more of his bowls in this post- We've also had a couple of questions posted this week. First comes from @smitty10101. Smitty is trying to match the headstock spindle to some of his accessories. Seems like his lathe had metric threads and he needs to adapt to Imperial threads. Please check out this post and offer any suggestions for sources- The second question came from @Jlockard1 and was posted in a thread started by @Ron Altier on stainless steel measuring cup kits. Jamie found the quality of the PSI cups less than satisfactory due to poor quality of the welds. He wondered if anyone could provide a source for a better quality kit. He explains in his post to Ron's thread- If you know of a source, please give him a heads up. What’s Coming Up- If you missed Cindy's live hollowing presentation, using Lyle Jamieson's equipment, she posted it to YouTube- From the AAW, Todd Raines will have an lesson on turning candlesticks. Looks like these will make super Christmas presents- For registration- https://community.woodturner.org/events/event-description?CalendarEventKey=4c1e49a4-b327-419c-8977-83da01e77a45&Home=%2fevents%2fmanage-events&_zs=ceDib&_zl=npbJ3 Picked this up from social media. Our very generous sponsor, Easy Wood Tools, is helping out with the Small Turning Expo! Registration and more information from this link- https://www.accelevents.com/e/mpg-small-turning-expo For The Newbies- Looking for some ideas for Christmas gifts? Christmas ornaments might just be the ticket! From Alan Stratton- Burls (burrs) can be used to create some gorgeous turnings. Mike Peace has posted a video covering some of the information to help you get started- Picked this up from Ron Brown's Newsletter- "The Divot – A Turner’s Secret Weapon Def: a small dent: a small depression or hollow Some things are intuitive and just obvious, but the importance of the divot was not one of them for me. I had been turning for quite a while before Chris Stott, a well-known English turner looked at me with amazement and asked, “Why don’t you leave the divot?” Chris was spending a week with me during one of his annual summer trips to America. He is the author of “Turned Lidded Boxes – 50 designs”. That book became a springboard for my turning career because it laid the foundation for so many basic skills one needs as a turner. Chris is the same professional turner who asked me on the second day if we were friends yet. I said yes and he replied, “Everything you are doing is wrong!” Let’s learn the right way. And so it began. Chris explained how incredibly handy leaving a divot until the last possible moment could be with all sorts of projects. Bowls, plates, platters, hollow forms, etc. When you turn the tenon on the bottom and form the outside, make a divot in the very center of the tenon and leave it there for now. During the last step, cleaning up the bottom and removing the tenon, the divot will act as an easy center-locating device. No matter what device you use to grip your project for the last step, using the divot and a cone center in the tailstock will help you perfectly re-center it quickly and easily. This applies to Longworth-style chucks, doughnut chucks, friction chucks, all kinds of jamb chucks both internal and external, Cole jaws, Nova chuck jaws, and vacuum chucks. Spindle turnings – turned lidded boxes, acorns, Christmas ornament globes, spheres, etc. For spindle-turned projects that require you to turn them end-for-end to work on what was the headstock end, a divot can be incredibly useful for quickly aligning it to run concentrically when you turn it around. As an example, let’s consider any small turned-lidded box project. There are two pieces to plan for: the base and the lid. Both will need to be flipped end-for-end, once to finish the inside and once to finish the outside. A divot speeds up this process immensely rather than the old turn and tap method. My turning life got much less difficult when Chris taught me this simple trick. Just as a divot helps us keep our turning work centered, our faith in the One who holds our tomorrow helps keep us centered when our day-to-day world tries to get out of alignment. For that kind of divot, I use my daily guide for living. Remember that wherever you go, there you are." Expand Your Horizons- These videos are from the AAW and provide maybe a little more information than you ever wanted to know about spalting. New Turning Items- Niles Bottle Stoppers has a new stopper design. These can really help focus on the stopper tops you design. Check them out at- https://nilesbottlestoppers.com/product/ss-7000-bottle-stopper/ Everything Else- Rick Turns list of YouTube woodturning videos from last week- Safe turning
- 4 replies
-
- 3
-
-
-
- mark lindquist
- sara robinson
- (and 31 more)
-
Our Patriot turners have been busy in their shops this week with a wide range of project! Our Patriot Turners- @Steve Krumanaker accepted his club president's challenge for making gnomes or "gonks". Steve received lots of comments and questions. Please check out his post for more images and ideas- Steve also showed us a new toy he bought. I have to say, I'm kinda partial to this one myself Sooner or later it happens to all of us. @Gerald was turning a bowl and disaster struck. But undaunted, Gerald pressed on and salvaged what otherwise would have been firewood. Check out what he did and the end results at- New member @Reese Aukee posted some of her awesome turnings. Reese is new to turning but it looks like she is a natural and a real eye for creativity!! She shared more of her work here- @Ron Altier is finally getting back into the shop after a brief hiatus as caregiver. As for most of us, woodturning is our relaxation and meditation- All did not goes as planned for Ron. As often happens, "the best laid plans of mice and men..." This post by @Headhunter reminded me that we really haven't promoted our "Ringmaster Sub-Forum" very often. Check out this post for some fantastic creations! Here is the link to the Ringmaster sub-forum- https://thepatriotwoodworker.com/forums/forum/98-ringmaster-turning/ What’s Coming Up- Click on the images for the links to registration and more information- From the AAW- From a social media post by Rebecca DeGroot- For The Newbies- From Carl Jacobson, a video covering some tools that make turning easier- Turning a thin walled bowl has a bit of a learning curve but they are beautiful and elegant. However, thin walled bowls are rather fragile and may not be suitable for utilitarian use. Here, Kent from Turn A Wood Bowl, demonstrates how to have to the best of both worlds. Mike Peace shows us we don't need a chainsaw or a chunk of log to make a bowl- Expand Your Horizons- Some turning, some carving and a lot of sanding when Tim Yoder tackles a Manzanita root- This one's for @Ron Altier. Ron turns crochet hooks for his Mrs. This video, from Alan Stratton, shows how to turn quilting tools. New Turning Items- Woodturners wonders have their Lathe Track System on sale. Check it out at- https://woodturnerswonders.com/collections/lathe-track Mentioned this before. Ruth Niles sold her business to Carl and Robin Jacobson. Ruth is holding a clearance sale to avoid having to ship a lot of stock from Pennsylvania to Oregon. Here are some examples of the savings available- Click on the image for the link to more sale items. The sale ends April 3!!! Everything Else- Rick Turns list of YouTube woodturning videos from last week- Cherry burl/wood platter from a piece of wood I got at the Nittany Woodturners Club meeting a while back-
- 5 replies
-
- 3
-
-
-
- kent weakley
- alan stratton
- (and 26 more)
-
After the recent bowl swap mentioned in another thread, I commented to the participants that some ideas I had may get me sent to a room with rubber wallpaper. I'll let you folks weigh in on that with these. The first pic is of the cantilever design in two versions. One straight cantilever (2nd pic) and the Springbowl (3rd pic) where the connections are offset opposite to each other. Bowls are NOT meant to be springy! These are hickory and mesquite. The 4th pic is just an offset that leaves open spaces between rings. The concept works but there are some serious details I need to work out yet. Black walnut for this one. The last pic is a follow-up to the chaos bowls I posted previously. Getting closer to what I want but not quite there yet. Need to smack the idiot who glued this together upside the head for not paying attention to what he was doing. Black walnut and Spectraply here.
- 6 replies
-
- 5
-
-
- lathe
- ringmaster
- (and 1 more)
-
Needed some small table lamps so I went to my trusty Ringmaster to fix the problem. The pair are on our bedroom dresser and the single lamp is in the living room. The single is mainly a conglomeration of leftover rings from other bowl projects. But it works.
-
A lot of people on different forums talk bad about the Ringmaster and how it only makes straight sided, cone shaped bowls from one board. Complex, compound curves can be achieved using multiple boards but that is something I haven't really gotten into. Instead, I like to explore "What would happen if....?". The 'cookie jar' shapes are two boards with lids made from the same board as the top section. The suspended bowls are made from one board with the lid being made separately. These are some of the shapes and concepts I have come up with so far. All are from several years ago. I can post some how-to tips if anyone is interested. Thanx for looking.
- 9 replies
-
- 10
-
-
- ringmaster
- form
- (and 3 more)
-
Since this forum got started, I am now officially interested. What is Ringmaster, what's the big deal, where do you get one, what is the experience level for using one? Thanks!
-
Hasn't been this busy on our forum in quite a while so let's just jump right in! Our Patriot Turners- We have had a new sub-forum added to the Woodturners Forum. The Ringmaster sub-forum is dedicated to those makers who create bowls using the Ringmaster method. You can find it listed under the main Woodturners Forum- https://thepatriotwoodworker.com/forums/forum/98-ringmaster-turning/ Let's see some of those beautiful creations!! @Gerald gave us a look at a commissioned bowl he is in the process of turning- Gerald tells us about the species and more in his post as well as a bit about his "new" kiln- Gerald also posted an interesting article by Ron Brown providing some additional thoughts on Carbide tipped tools. We have had several insightful discussions here on the forum comparing traditional and carbide tools. @FrederickH posted a question to the group about using a fluted parting tool. Several of our members provided their insights. If you can help out Rick, give him your thoughts at- One of our newer members @adot45 gave us a look at his latest fantastic turning. Please see his post and welcome him to the forum! More about Dave and some additional images are in this post- And more here- Even @smitty10101 is getting into the stacked ring bowls! He is looking for information about a thin parting tool. If you have a source or have made such an animal, why not share your knowledge with him- @forty_caliber and family have taken some friends under their wing. As a way to help ease the sorrow of a loss, he has turned a memory box for a family member- Forty shows us some additional images in his post. Note the laser burned embellishments! Last week we had a question about bowl saver tools. Not sure this is what the author had in mind but @forty_caliber found one that will certainly doe the trick! @forty_caliber's post from last week generated additional input that might be useful for those following the discussion of hollowing tools- Or resident Christmas ornament designer has done it again. @Ron Altier turned this gorgeous little jewel- Ron explains his design idea in his post We had lots more from our members on @FlGatorwood's little train that could. If you missed it, here's where the discussion left off- @bradleyheathhays's post from last week also continued to receive comments and inputs. Here is the entire thread location- @Grandpadave52 gave us a heads up on the contest being run by Woodworker's Journal. The challenge was to turn a honey dipper. Not sure if our own @Steve Krumanaker entered the contest or he decided to let someone else win first place . https://www.woodworkersjournal.com/honey-dippers/ What’s Coming Up- Women In Turning in conjunction with the AAW presents Kailee Bosch, Rebecca DeGroot, and Marjin Wall to give short presentations about their work, ideas, and inspirations, followed by a group discussion and Q&A, led by artist and moderator Hayley Smith. The event is free and open to the general public. For registration- https://www.woodturner.org/Woodturner/WIT/WIT-Home-Page.aspx?WebsiteKey=c9100f02-c77e-4177-a9bc-7d3eb0216238&hkey=7f6a65b2-ec98-472f-a7b6-2ac573f7258d&New_ContentCollectionOrganizerCommon=8&_zs=lMMTa&_zl=02Hp2#New_ContentCollectionOrganizerCommon For The Newbies- Nice little project for the coffee lover in the family. If you prefer a heavier version, Ruth Niles, https://nilesbottlestoppers.com/ , has some stainless steel kits. https://www.woodworkersjournal.com/project-classy-espresso-tamper/ Expand Your Horizons- Turning demo from Mike Waldt- New Turning Items- Tim Yoder has an improved hollowing rig- The folks at Woodturners Wonders have some special, short time deals on grinders- https://woodturnerswonders.com/pages/grinders Everything Else- Rick turns list of YouTube woodturning videos from last week- Safe turning and stay well
- 8 replies
-
- 7
-
-
-
- grinders
- woodturners wonders
- (and 26 more)
-
Well it would be nice if I could recover all my posts on WWF but can't do that so here goes. My Ringmaster came from a deceased woodworker and was set up for a 12 inch lathe. Well after checking with machine shop to get block made to setup on my Jet 1442 The cost was astronomical so I call RM and sent back to them . I think the rework was maybe $200. I have not gotten away from simple basic bowl but have done some pie shaped blanks. This is my first try in the press which is used to glue the rings together. This is the first bowl completed. This is the glued up board blank. After it is planed we measure in four or 5 spots to determine thickness so we can set the cutter angle. This may be the bowl from the bowl from the board above. This is a slightly busier glue up. This is one form resulting from the blank above. Note the rim is left wider in this version. This is the finishes bowl. Ordinarily you cannot use turning tools on a RM bowl. Yes, I have tried even with warnings and blew a ring or two off a bowl. yes it did explode. Now since that is the disclaimer I do know a turner who makes his rings 1/2 inch and used tools. I do 3/8 and use coarse sandpaper to sand those rings flat and you see in next to last picture above. More later on how all this is done.
-
Here is a jewelry box made with segments then cut on the Ringmaster lathe.
-
The Ringmaster Bowl Turners sub-forum is live and ready for your posts!! You asked for it and our gracious site administrator spent sleepless nights; slaving over a hot computer; consuming copious amounts of coffee and from what I hear revisiting his Marine language to make it available. Please use this sub-forum for all things Ringmaster. Show off your turnings, techniques and tools! Please be sure to add TAGS to your posts to help others during their searches. I am looking forward to seeing what you all do! POST AWAY!!!!!!!!!!!!!
- 1 reply
-
- 5
-
-
-
- sub-forum
- ringmaster
- (and 5 more)
-
In doing ringmaster bowls it is sometime difficult to decorate the bottom on lathe and the many stripes of the glueup would make it a little blurry. On one of these I tried something different. I carved a flower and burned the background to make it stand out.Woods used are cherry,walnut, river birch and exotic I cannot remember.
- 4 replies
-
- 6
-
-
- ringmaster
- carve
- (and 2 more)
-
Been planning on more Ringmaster bowls since DIL sold one. Steve inspired me to do some carving and burning . Has been maybe three years since doing a RM bowl so had to relearn some. When cutting the first ring it is waste so not worried if it stayed in one piece. So in cutting the first ring on two large bowls it broke and one hit the deflector and then bounced on my forehead. So i put my face shield on (open top) and the first one on next bowl broke and dangedif it didn’t hit the top of my head.
.png.ce0dbf50f4d0b2d6d9489ab2578b19fa.png)
Facebook.png.ff598683b484782f6ee0fd94e9db4cad.png)
.JPG.46403e9e923299806a35b2fbbd9a6580.JPG.9312cfb1f8979d068e9602e692b86afd.JPG)
CindyDrozda_Facebook.png.c821f43d9cc4da3484c10d88773ab31d.png)
CindyDrozda_Facebook.png.1d63780924801e6b55025309d4add959.png)
.png.e387a3bc0edad1ec5cf3e76f39c65ff3.png)
.png.a5f282aceaa8649378af2102dfe8c15c.png)
.thumb.jpg.573d1497d0675219908c85aabefd797a.jpg)
