Search the Community
Showing results for tags 'osb'.
-
Was at the furniture bank today catching up on repairs of a large donation. A lot of today's repairs were loose pieces, often legs. Now just don't expect any of this upholstered furniture to be passed down to your grandkids. OSB as a structural frame? Really? Three pieces not repairable because the legs cannot be reattached.
-
Always check your circular saw depth. A friend of mine, who is a retired professional woodworker and has written a number of books on the subject, was cutting some sheet goods on his sawhorses. Result:
-
I posted this in a separate listing in the Turner's Forum earlier this week but am adding it here to help spread the word. During SWAT, our most generous sponsor- Easy Wood Tools ( @Jim from Easy Wood Tools ) donated the profits from a special T-Shirt sale to the Vetsturn program provided by ToolMetrix. The Vetsturn program is looking for 8 additional qualified veterans to participate in their next session. They have posted this YouTube video with the information and additional details. Please watch this video at the YouTube site and check out the links provided for additional information and links. In addition, the following link will take you to an article in The Woodworker's Journal detailing the program- https://www.woodworkersjournal.com/vetsturn-helping-heal-ptsd-through-turning/ Our Patriot Turners- @HandyDan was kind enough to create a detailed how-to on his baby rattles. The complete steps are here- Thanks, Dan! @forty_caliber worked on rough turning some pecan bowl blanks. These surely have some gorgeous grain- More about each one can be found in these posts- "Forty" also posted a picture of some bowl blanks from which he is going to turn presents for his Mrs. The blanks are from Cook Woods- Check out his post for more about the species. @aaronc posted images of some maple limbs he cut and set aside for turning. The dark and contrasting light colors should make for some fantastic turnings. Check out his post at- @Steve Krumanaker started a large platter on which he will perform his pyrography magic! In his post, Steve shows us a bit his plan for the design- What’s Coming Up- Last week we mentioned the 2022 Christmas ornament contest was about to start. Here's the video with all of the necessary information- For The Newbies- The screw chuck is often overlooked as a method of holding pieces on the lathe. In these two Richard Raffan videos, he demonstrates using this method for several types of turnings Expand Your Horizons- Picked this up from the AAW. Using the beading tool to create some nice designs- Last week we posted a video from Alan Stratton where he turned a vase from OSB. He has since improved the end results by stabilizing the material. Bird house turnings make fine Christmas ornaments. With the ornament contest just starting, this video from Mike Peace may give you some ideas for an entry- New Turning Items- Woodturners Wonders has a sale on lights- https://woodturnerswonders.com/collections/weekly-sale Everything Else- Whether you are doing an IRD, in-person demo or instructional video, these are some great tips from Ron Brown. Copied and pasted from Mr. Brown's newsletter: Start At The End That sounds backward. There is a very famous quote from Napoleon Hill, “What the mind can conceive, it can achieve.” Scripture tells us that “Where there is no vision, the people perish.” If you will take the time to see the end, the finished project, and the final result before you ever begin, all you have to do is figure out how to get there from here. If you don’t know where you are going, you’ll get there every time, and all too often, you won’t like where you ended up. In this age of YouTube, Vimeo, and TikTok videos, it aggravates me to no end when folks present a video of them making something. They start at the beginning without any preview of the finished project. You most often have no inkling of even what they are making until almost the very end. And about 90% of the time, it was something I had no interest in viewing. My plea, especially in this age of hybrid meetings including Zoom, is to begin at the end. Have examples of the finished project, or at least illustrations so folks know where you are going. Then show them how you get there. Your presentations will be much more effective when your audience knows where you expect to end up. That approach also keeps you focused on the end result of your process. As an example, let us use something as simple as turning a natural edge bowl from green wood. It could even be a limb or a branch. 1. Show a finished natural edge bowl so folks know what you are talking about. 2. Begin with a half log with the bark still attached. 3. Mount the blank in the lathe between centers with the bark side toward the headstock. 4. Bring up the live center and shape the outside of the bowl including a tenon at the tailstock end. Be sure to leave a divot in the center of the tenon. You will need it later. 5. Sand and finish everything but the tenon. 6. Turn the blank around and mount it in a 4-jaw chuck. 7. Remove the inside and turn the walls to final thickness leaving the bark attached. 8. Use a jamb chuck to press against the inside of the bowl and turn it around with the tenon toward the tailstock. 9. Use the divot you created in the center of the tenon. Place the point of your live center in the divot and lock the bowl against the jamb chuck. 10. Carefully shape, or remove, the tenon down to a small nub and finish the outside of your bowl. 11. Remove the bowl from the lathe and finish the nub by hand. 12. Since the blank was green, it will go oval. Expect it, celebrate it, love it. 13. You can leave the bowl unfinished, but my preference is to apply a few coats of Walnut Oil finish. You began by showing folks a finished Natural Edge Bowl so they knew what it should look like. Then you executed all of the steps to make one before their very eyes. When you finished, they knew what to expect and how they can do it themselves. You are a master!!! You may have been the most effective demonstrator they ever saw. Follow this recipe and you will have great success every time. Remember that wherever you go, there you are. Rick Turns list of YouTube woodturning videos from last week- Safe turning
- 4 replies
-
- videos
- rick turns
- (and 24 more)
-
Congrats to all the winners of our summer fundraising/raffle event. A great big THANK YOU to everyone who participated in helping keep our site alive!! The Patriot Woodworker site is dedicated to helping veterans. Our very generous sponsor Easy Wood Tools ( @Jim from Easy Wood Tools ) is offering a limited edition T-Shirt and they are being sold to support combat veterans through VetsTurn. Please show your support by ordering a shirt today. The shirts are $35 each and include shipping within the USA. Please consider helping out VetsTurn and our combat veterans. Shirts can be ordered at https://www.easywoodtools.com/ Our Patriot Turners- @Gerald gave us a look at a tool stand he made. This one certainly won't tip over! Gerald tells us about where he got the base in his post- What’s Coming Up- From the AAW list of upcoming events- https://www.eventbrite.com/e/the-kitchen-series-part-one-woodturning-platte-tickets-392861458197 For The Newbies- Mike Peace continues to produce short videos covering turning topics often over looked. This one is on lathe vibration- You don't necessarily need a large chunk of a log to turn something beautiful. In this video, Richard Raffan demonstrates using a flitch to create bowl blanks. Watch how a professional handle the occasional chuck problems, too. Here's a project that can be sent home with the grandkids. Take the phone off of the hook after they leave- Expand Your Horizons- It has always bothered me to waste so much material when creating a bowl. In this video, Mike Peace visits a turner who demonstrates using the Oneway Coring System- I know @Steve Krumanaker and @Gerald both embellish their turnings with pyrography techniques. This video, from the AAW, provides some tips for those who might be interested in getting started with this- Not a material I have ever considered using to do a turning but Alan Stratton creates a really nice looking segmented vase from OSB! Mike Waldt turns a gorgeous vessel from "American Mountain Mahogany". I had never heard of this species but it sure is beautiful when turned- New Turning Items- Not a new item but new sale price from Woodturners Wonders- https://woodturnerswonders.com/collections/weekly-sale Everything Else- Rick Turns list of YouTube woodturning videos from last week- If you missed the online Virtual Craft Festival last week, each presenter's video is listed in Rick's post. Safe turning
- 3 replies
-
- woodturners wonders
- american mnt. mahog
-
(and 24 more)
Tagged with:
-
Hi here i go again. Bought a veneer door from big box stoors. Says finish with oil based material. Oil based stain still around oil based poly or lacq no more. 1. Finish sand 320 then 400. 2. Apply minwax dye/stain. 3. Seal with sellac blonde or garnet. 1.5 lbs cut two coats. 4. Sand down shellac where needed. 5. Apply water based poly or lacq. The veneer does not play well with water. How does my above receipe sound?