Search the Community
Showing results for tags 'lathe drilling'.
-
Nice little 3" snowfall this morning. Used the snowblower for the first time this winter. Our Patriot Turners- @Steve Krumanaker Showed us a really neat beading tool handle he made. The handle serves the normal handle function while turning but Steve also designed it to act as a storage place to protect the tip during transportation- Steve created a video of the build and posted it to his YouTube channel- Instead of just making a just a handle, @HandyDan made a complete beading tool! Dan details the tool fabrication and the operation in his post- Beading tools and bowls dominated our posts this past week. @HandyDan has been turning some little bowls and used his beading tool to decorate them! He shows us what he made in this post- @jthornton continues working on his popcorn bowls segments. If you missed what JT has done, check it out here- @smitty10101 is looking for some ideas on making a hand help drill chuck. He posted his questions in our Woodturners Tips sub-section Our members have offered several ideas/suggestions. Maybe you could drop by his post and see if you can help him. @Bob Hodge added to his post on lathe tool carbide cutters. He was curious about the cost and quality of the various suppliers. Check the latest in his post and see if you can offer some suggestions- What’s Coming Up- Click on the images for links to more information and registration. For The Newbies- Neat little project from Carl Jacobson to practice spindle turning- A short video from Stuart Batty on grain direction- Want to make that turned bow even more attractive Kirk DeHeer shows what can be done in this video from Craft Supplies USA- Twice turned bowls are a great way to have finished bowls that are symmetrical and less likely to crack. Richard Raffan discusses it in this video- If you've been turning for awhile and thinking about moving up to a new lathe, Mike Peace has some things to consider- Expand Your Horizons- Richard Raffan discussed the procedure of twice turned bowls but bowls can be turned start to finish with "green" or wet wood. Alan Stratton turns this bowl and adds carved feet. I think I found what my relatives will be getting next year for Christmas- New Turning Items- You may remember that Easy Wood Tools has purchased Yorkshire Grit. Another product often used in conjunction with the grit is Hampshire Sheen. Hampshire products are featured on their YouTube channel. They are constantly adding new products. https://www.youtube.com/@HampshireSheen Their products can be ordered from https://thewalnutlog.com/ Everything Else- I see Rick is back! Rick Turns list of YouTube woodturning videos from last week- Safe turning
- 5 replies
-
- green wood bowl
- alan stratton
-
(and 26 more)
Tagged with:
- green wood bowl
- alan stratton
- mike peace
- lathe choice
- kirk deheer
- craft supplies
- richard raffan
- inllay
- turned box
- grain direction
- stuart batty
- carl jacobson
- mushrooms
- stewart furini
- carbide cutters
- question
- lathe drilling
- bowls
- handles
- beading tool
- woodturners
- wisdom
- wednesday
- carved feet
- volcano salt urn
- hampshire sheen
- rick turns
- videos
-
My apologies to @Smallpatch for giving credit to another member on making the chess piece. I have totally lost my mind. Finally got that computer change-over done (I think), we'll see whether the phone rings tonight. Note to self: clean out your own contact's list. No one need 2894 contacts to try to inform of a new email address. Our Patriot Turners- @Smallpatch was asked to recreate a chess piece. Can’t wait to see the results! Jess has a funny story to go along with the request. Be sure to check out his post- @HandyDanTurned a set of incredible earrings. Dan is our resident "inside-out" turning expert and these beauties accent his talents! Dan received lots of comments and he also describes his process in this post- It is encouraging to see our turner's progress as they post their projects. Some of our member have years of experience while others are relative new to the discipline. @Bob Hodge tells us about how he is developing his creativity gene. I love the way he has chosen to display his turnings. So much better than setting on a shelf. Please check out his post with his feelings about turning Patriot member @BillyJack posted a question for our members about lathe tools. Maybe you can help him decide on what to get- We've had a couple of additional comments added to previous posts. @Bundoman Update his post about his winter projects and his daughter's new lathe- And going back into October on a post concerning end grain turning problems, @Bob Hodge added this information- What’s Coming Up- Pretty well caught up-to-date on what's happening in the near future. For The Newbies- A couple of videos from Mike Peace on drilling on the lathe- and- An older video but a nice useful beginner project from Robo Hippy The first installment on spoon turning from Neal Brand- Expand Your Horizons- Alan Stratton continues his demonstration of the eccentric chuck. Stay tuned to this channel as he \has pronised to show how to make the chuck- Richard Raffan turns square plates- not without a little problem- Cindy Drozda discusses turning tool handles. This was a live presentation and a little lengthy but has great information- New Turning Items- If you turn segments pieces, you are probably aware of the wedgie sleds for the table saw. This video shows a similar device for the bandsaw. Not exactly new, the Tormek wet grinder has been around for a long time. Here's Glenn Lucas demonstrating the turning sharpening jigs for woodturning tools- Craft Supplies USA has some new turning blanks available. These are Chroma-Ply blanks https://www.woodturnerscatalog.com/t/29/Project-Blanks?b=chromaply&utm_source=csusa&utm_medium=email&utm_content=chromaply&utm_campaign=22-02-blanks Woodturners Wonders has a Valentines sale. Check the website for more items and coupon code for discounts- https://woodturnerswonders.com/collections/sweetheart-sale-2022 Everything Else- Rick Turns list of YouTube woodturning videos from last week- I have a Sorby spiraling and texturing tool. I'm not very good with it. But I've seen some awesome patterns created by turners like Darryl Jones- https://www.instagram.com/dreadknotwoodshop/?hl=en This is one of his pieces from his Etsy shop It amazes me what he, and others, can do. Anyway I've been practicing and recording results so I can reproduce the embellishments on other pieces. I probably should have picked a softer wood than white oak. Sometime back I made a tool described by Mike Peace for small pieces (the one with the brass shank). I use it on bowl bottoms for a spiral pattern. Safe turning and stay well
- 5 replies
-
- cindy drozda
- square plate
-
(and 31 more)
Tagged with:
- cindy drozda
- square plate
- richard raffan
- eccentric
- alan stratton
- neal brand
- mike peace
- robo hippy
- wooden knob
- lathe drilling
- jacobs chuck
- daughter lathe
- end grain
- artist
- bowls
- inside-out
- earrings
- chess piecs
- wisdom
- woodturners
- wednesday
- woodturners wonders
- darryl jones
- videos
- sorby texture
- question
- lathe tools
- tool handles
- accu-wedge
- glenn lucas
- tormek
- chroma-ply
- lathe
-
Saturday is the twentieth anniversary of 9-11. Tragic national events have a way of sticking with us and we remember exactly where we were. I have vivid memories of two such event. President Kennedy's assignation- I was in Memphis going to Navy electronics school. The 9-11 attack- I was teaching at the Vo-Tech school. Our Patriot Turners- @Fred W. Hargis Jr had a little misfortune with a small bowl he was turning. We never know just how deep some of the cracks can be in a blank- Fred asked our turners what they thought he should do at this point and he received lots of helpful advice. @Gerald teste his new laser on his hollowing rig! What a fantastic turning rig. Gerald said it is from Tim Yoder. He tells us more about this tool and some modifications in his post- Gerald was kind enough to give us information concerning some of the vendors at S.W.A.T. in a response to last week's "Wednesday's..." Our turners have also posted some of their work in other forums here on the Patriot- In the "What's On Your Weekend Agenda" section, @forty_caliber showed us a little problem he had with his lathe- Powermatic sent him a replacement for the handle. Forty also posted some turning he is doing, here- In our "Good Monday Morning" section, Forty posted a lid he is turning for the bowl pictured above- And, in our newly christened "Hump Day" section, @Fred W. Hargis Jr gives us a quick update on some handle turning- @forty_caliber made a design change in the lid for his bowl- @Gerald is setting up for a club meeting- What’s Coming Up- As a reminder, a couple of AAW associated on-line events coming up. Click on the images for links to registration. For The Newbies- New lathes usually come with a faceplate. That one may, or may not, be ideal for your needs. Alan Stratton shows us how to make several faceplates and why you might want several different types- Lacquer can make a nice finish on a turning. Here is Sam Angelo discussing use, application and thoughts on a lacquer finish- Expand Your Horizons- Carl Jacobson takes his beading and burning techniques to the next level! Has this happened to you? Someone asks you to make a turning but you discover that your lathe isn't long enough to make the piece. Here, Ernie Conover gives us techniques to overcome the problem- sorry, it's not buying a bigger lathe And, just for the heck of it, watch Tim Yoder turn a gigundous platter- New Turning Items- The folks from Woodturners Wonders have a new smaller 4-in-1 CBM wheel. This one is 6" in diameter- Check it out at- https://woodturnerswonders.com/collections/6-inch-wheels/products/6-4-in-1 Everything Else- Rick Turns' list of YouTube woodturning videos from last week- Time to replenish my stock of rolling pins. The most time consuming part of them is making the walnut and cherry inserts- which does not require any turning. I had a cherry board in the shop but needed to drag up a few walnut boards from the wood storage shed. Each insert strip needs to be 10.5" long x 2" wide and .125' thick. I got started by ripping all the boards to the 2" width and 22" long. The thicknesses varied from about 1" to 1.25"- Next, surface plane to one good side- Then I need to re-saw the pieces into thinner slices. My old Taiwanese bandsaw doesn't do well with a rip fence so I scribe a line to follow. Just a tad under 3/16" Using a re-saw post and slice off a strip- After all the boards have the thin strip removed, it's back to the planer to smooth away the saw marks for the next strip. Wash, Rinse and Repeat until all of the boards have been converted into thin strips The strips have one smooth side- from the planer, and one rough side from the re-saw operation. They are all about 3/16" thick but have slight variations. To bring them to the final thickness and remove the saw marks, out comes the shop made drum sander. The drum sander was built just for this purpose. I used to use the oscillating spindle sander and a fence but I couldn't get consistent thicknesses along the length of the inserts. Notice there is no belt feed! Also, about the maximum I can remove with one pass is .01". This is gonna take a while!!! 3 passes thru and still need about 3 or 4 more to get to .125" Safe turning and stay well