Search the Community
Showing results for tags 'kiln'.
-
The weather turned out to be much nicer today than the weather man said it would be. A balmy 73. I decided to get this build done today instead of tomorrow. Box with shelving and rear baffle removed. Removed and discarded OEM low voltage fan. Installed 110v 210 CFM axial fan. Air flows to the rear of the box into a plenum. Air is diffused through the vent at the top. Baffle reinstalled. Hygrometer / Thermostat power distribution control. Fan is wired to the hygrometer, light bulb is wired to the thermostat. Set controls to run the fan until it drops below 10% RH. The light bulb runs until the temperature reaches 110. These are initial settings and will need to be adjusted based on actual performance. Sensor I used a 4 1/2" hole saw to make two ventilation holes. I installed a 4" louvered vent with bug screen on the outside and a dust collection blast gate on the inside of each hole. The blast gate provides air flow adjustment. Added some rough turned bowls. Using a moisture meter, each was marked with today's reading.
- 7 replies
-
- kiln
- turning blanks
-
(and 2 more)
Tagged with:
-
Well, I've graduated to Headquarters Driver but still TAD to Ships Laundry and assistant Coop cleaner. Mimi goes for her follow-up 2 week appointment with the surgeon tomorrow. Probably remove the staples and start therapy as well. Our Patriot Turners- @John Morris posted an inquiry on the popularity of pen turning. Turners seem to follow trends and pens were all the rage a while back. Our turners had several thoughts on the subject- I had missed one of John's post from back in December. He wondered, if given a choice, what would be our favorite three traditional turning tools- Check out what several of our members chose and while you're there tells us what you would select- @forty_caliber finished his drying kiln. He has really thought this through and looks like the internal environment will really do the job- There's a bunch more photos in his post along with descriptions of the controls he is using- @jthornton continues to work on his chevron bowls. He took the time to perfect the accuracy and it shows in the alignment of the design- JT's post takes us along through the glue-up and turning process. Please check it out! You may remember from last week that JT's original idea for this design was to create "popcorn bowls". As with all turners, design changes are part of the game. Check out what JT decided to do with the popcorn bowl design- JT was also one of the lucky winners of our Ward 57 raffle. He tells us about the prize we won - @HandyDan posted information about a great deal from Penn State Industries and gave us a look at how he modified a set of chuck jaws to suit his needs. From PSI- The link-https://www.pennstateind.com/store/CUG3418CCX.html?utm_source=Google_Shopping&utm_medium=organic&utm_campaign=&utm_term=CUG3418CCX&gclid=Cj0KCQiAq5meBhCyARIsAJrtdr70ldWCA_YmLJ606Nrzu2Q_cEi44g6K3bWv-v2lWtTpmg-0b7wwgpAaAksvEALw_wcB @Steve Krumanaker can't wait for Christmas! He has already started on his ornaments for 2023! I love these little birdhouses. What’s Coming Up- Click on the images for links to more information and registration- Cindy Drozda does a lot of free online programs. Her only request is that you signup for her emails. Click on the image to get to the signup page For The Newbies- Keeping your lathe Morris Tapers clean is important to ensure the centers don't slip. You can buy brushes but Mike Peace shows us how to make one- Lyle Jamieson demonstrates how to create an Koa crotch bowl with undercut rim. This is a piece of beautiful wood. The techniques can be used on any species. Expand Your Horizons- From the AAW, this quite long video from a live demonstration by Al Stirt. He demonstrates carved square platters Adding threads to a lidded box can add another level of pizzazz to your turnings. The following three videos offer several considerations. @jthornton showed us his segmenting procedures. This video from Jim Rodgers shows his methods of designing, cutting, gluing and turning. Within the video, there is mention of software that can be used to assist in design and calculations. The link to WoodturnerPro software- https://www.woodturnerpro.com/ New Turning Items- Not specifically a turning item but Starbond Adhesives has released a new odorless thin CA. From their website- NO-05 Starbond Infiltrant Odorless Thin CA Glue is a 3D printer infiltrant that is fumeless, odorless, and hypoallergenic. This watery-thin adhesive is perfect for getting into those hard-to-reach hairline fractures, pores, and narrow slots. Our NO-05 is ideal for porous materials such as foam, soft wood (balsa), ceramics, unpolished minerals, and fossils. Often used as a glossy finish, this glue can be sanded, then polished to perfection! Using capillary action, the NO-05 glue works wonders on inlay applications as it penetrates and stabilizes the material. Click on the above image for the like to the product page. Everything Else- Not sure what happened to Rick Morris (Rick Turns). His weekly list of YouTube woodturning videos has been missing for a while. Hope he is OK.
- 3 replies
-
- wisdom
- woodturners
-
(and 27 more)
Tagged with:
- wisdom
- woodturners
- pens
- traditional tools
- kiln
- shopmade
- bowl
- segments
- psi
- chuck
- modification
- ornaments
- birdhouse
- lyle jamieson
- scott hampton
- kade bolger
- turned box
- meet the woodturner
- cindy drozda
- mike peace
- morris taper bursh
- undercut rim
- al stirt
- carved platter
- wednesday
- threaded inserts
- software
- jim rodgers
- starbond
-
Had a call before we went on a trip . Customer got my name from woodworking club member. He had cut some 1 inch River birch and wanted bowls for Christmas. At the time I did not have a way to dry bowls that fast but acquired a kiln to do that job. He brought it over today and wants 5 bowls . He said he would sand and finish but I told him sanding would be tough off lathe. So being the one always in a rush I turned one today. He wanted thick so it is a tag 0.47. Bottom is a bit thinner. By the way the bowl is sitting on the kiln.
- 23 replies
-
- river birch
- turning
-
(and 2 more)
Tagged with:
-
Happy Thanksgiving! Here's hoping this year has been kind to everyone and that you are trying to get back to "normal". Well gang, we are about 1/3 the way to our goal! Don't wait until the last minute to get in on the fun! Our Patriot Turners- With the holiday season upon us, the main theme this week seems to be Christmas ornaments. @Steve Krumanaker posted a little birdhouse ornament and asked the group their opinions on the design. Steve received lots of positive comments and suggestions- @Ron Altier is always ahead of the game when it comes to ornaments. This one has a beautiful combination of species/colors. Ron tells us about why he turned this one- @Gerald started a post asking what we were making for Christmas gifts this year. Gerald has turned a colorful bell ornament- And @HandyDan posted one of his gnome ornaments- See what our members had to say about these and add pictures f what you are making! @Gerald also gave us a more detailed look at his new kiln. He posted several images of the working parts and answered questions- I want to thank @FlGatorwood for giving me a heads up this turning video from Mike Peace. Really show the processes for turning a pepper grinder from a pre-drilled blank. Thanks, Steve! What’s Coming Up- Join Cindy Drozda, Lyle Jamieson, Steve Worcester, Joe Fleming, John Jordan, and Tod Raines for 3 evenings of fun to kick off the holiday season. There will be six mini demonstrations, questions & answers, tool showcase, vendor specials, raffle prizes, and fun and popcorn as we hangout together. This is a FREE Zoom meeting on Friday, Saturday and Sunday- November 26-28. Sign up here- https://us02web.zoom.us/meeting/register/tZEvduuurTgoHtH9C61nkAf2dy14df57RmrB 6 Turners LIVE Holiday Special! IT’S THE 12 TURNINGS OF CHRISTMAS! Registration- https://woodturnersretreat.com/ For The Newbies- Looking for a simple Christmas and would like to try bowl turning? Kent from "Turn A Wood Bowl" shows us how to get two for one! Scott Hampton's presentation on sharpening from World Wide Woodturners- @Gerald's little Christmas ornament really stands out with his choice of using color as an embellishment. The New Jersey Woodturners recently hosted an IRD with Michael Kehs demonstrating embellishing techniques on a turning. Expand Your Horizons- A couple shop made lathe hacks from Fine Woodworking- A disk sander- https://www.finewoodworking.com/2011/07/19/turn-your-lathe-into-a-disk-sander Using a router at the lathe- https://www.finewoodworking.com/2020/02/21/using-a-router-at-the-lathe Another awesome multi-axis Christmas ornament from Alan Stratton- Jim Rodgers turns a sweet little one piece scoop, on the lathe, using a custom made chuck- New Turning Items- Tim Yoder turns a huge chunk of olive wood into a utensil holder. He does the hollowing using his new Eblo 2 hollowing rig. Tim provides some great tips on using the hollowing system. Everything Else- Rick Turns list of YouTube woodturning videos from last week- Safe turning and stay well
- 5 replies
-
- wednesday
- wisdom
-
(and 28 more)
Tagged with:
- wednesday
- wisdom
- woodturners
- adopt-a-family
- ornament
- kiln
- pepper mill
- mike peace
- cindy drozda
- lyle jamieson
- steve worchester
- joe fleming
- john jordan
- tod raines
- vendor showcase
- zoom meeting
- woodturners retreat
- bowls
- scott hampton
- embellish
- michael kehs
- sharpening
- disk sander
- fluting
- scoop
- jim rodgers
- elbo 2
- tim yoder
- rick turns
- videos
-
Hasn't been this busy on our forum in quite a while so let's just jump right in! Our Patriot Turners- We have had a new sub-forum added to the Woodturners Forum. The Ringmaster sub-forum is dedicated to those makers who create bowls using the Ringmaster method. You can find it listed under the main Woodturners Forum- https://thepatriotwoodworker.com/forums/forum/98-ringmaster-turning/ Let's see some of those beautiful creations!! @Gerald gave us a look at a commissioned bowl he is in the process of turning- Gerald tells us about the species and more in his post as well as a bit about his "new" kiln- Gerald also posted an interesting article by Ron Brown providing some additional thoughts on Carbide tipped tools. We have had several insightful discussions here on the forum comparing traditional and carbide tools. @FrederickH posted a question to the group about using a fluted parting tool. Several of our members provided their insights. If you can help out Rick, give him your thoughts at- One of our newer members @adot45 gave us a look at his latest fantastic turning. Please see his post and welcome him to the forum! More about Dave and some additional images are in this post- And more here- Even @smitty10101 is getting into the stacked ring bowls! He is looking for information about a thin parting tool. If you have a source or have made such an animal, why not share your knowledge with him- @forty_caliber and family have taken some friends under their wing. As a way to help ease the sorrow of a loss, he has turned a memory box for a family member- Forty shows us some additional images in his post. Note the laser burned embellishments! Last week we had a question about bowl saver tools. Not sure this is what the author had in mind but @forty_caliber found one that will certainly doe the trick! @forty_caliber's post from last week generated additional input that might be useful for those following the discussion of hollowing tools- Or resident Christmas ornament designer has done it again. @Ron Altier turned this gorgeous little jewel- Ron explains his design idea in his post We had lots more from our members on @FlGatorwood's little train that could. If you missed it, here's where the discussion left off- @bradleyheathhays's post from last week also continued to receive comments and inputs. Here is the entire thread location- @Grandpadave52 gave us a heads up on the contest being run by Woodworker's Journal. The challenge was to turn a honey dipper. Not sure if our own @Steve Krumanaker entered the contest or he decided to let someone else win first place . https://www.woodworkersjournal.com/honey-dippers/ What’s Coming Up- Women In Turning in conjunction with the AAW presents Kailee Bosch, Rebecca DeGroot, and Marjin Wall to give short presentations about their work, ideas, and inspirations, followed by a group discussion and Q&A, led by artist and moderator Hayley Smith. The event is free and open to the general public. For registration- https://www.woodturner.org/Woodturner/WIT/WIT-Home-Page.aspx?WebsiteKey=c9100f02-c77e-4177-a9bc-7d3eb0216238&hkey=7f6a65b2-ec98-472f-a7b6-2ac573f7258d&New_ContentCollectionOrganizerCommon=8&_zs=lMMTa&_zl=02Hp2#New_ContentCollectionOrganizerCommon For The Newbies- Nice little project for the coffee lover in the family. If you prefer a heavier version, Ruth Niles, https://nilesbottlestoppers.com/ , has some stainless steel kits. https://www.woodworkersjournal.com/project-classy-espresso-tamper/ Expand Your Horizons- Turning demo from Mike Waldt- New Turning Items- Tim Yoder has an improved hollowing rig- The folks at Woodturners Wonders have some special, short time deals on grinders- https://woodturnerswonders.com/pages/grinders Everything Else- Rick turns list of YouTube woodturning videos from last week- Safe turning and stay well
- 8 replies
-
- grinders
- woodturners wonders
- (and 26 more)
-
I kinda inherited this. The club member whose shop we have been cleaning out built this and one for a friend (twice this size). So last thing to haul off and I am going to try it out. The friend he built the larger one for showed me some 2x2 blanks he dried from soaking wet and not a crack. It has holes drilled top and bottom and a incandescent bulb for heat. Uses a computer fan to circulate air. The thermostat is set to low of 90 and high of 100 but as I set this up noticed the thermostat is in Celsius so go to internet and get 32.22 to 37.78 ok I used 32 to 38. Will test this in November when I get back from the Lake.
-
Woodturners took a page out of the lumber industry playbook for drying their bowl blanks. If you can speed up drying lumber, why not a bowl blank. Turners have been building/repurposing equipment to create drying kilns for some time. The trick to incorporating this method is not to dry the bowl blanks too quickly. As with the previous methods, controlling the moisture loss to equilibrium is a balancing act. Too slow and you'll grow old waiting as well as mold can grow on the blanks. Too fast and the blanks run the risk of cracking. A quick Internet search will yield a plethora of ideas, videos and "professionals". I've tried to pick more authoritative sources for reliable ideas. This first exchange is from the American Association of Woodturners. The original poster inquired about a shop made kiln. The responses were from experienced turners and they offered good advice/ideas. https://www.aawforum.org/community/threads/home-made-kiln.12618/ Following along with this post, led me to Cindy Drozda's site and her instructions on a drying kiln- http://www.cindydrozda.com/handouts_Pdfs/handouts/demo handouts/drying_kiln.pdf Another woodturning organization- The Baltimore Woodturners- wrote this article on how one of their members built/modified his kild- https://www.baltimoreareaturners.org/articles/bowldryingkiln.pdf All of the preceding ideas are based around drying a lot of bowls. Not every turner (myself included) needs to process a dozen or more bowls at one time. For me, I needed to find something that could dry a few small bowls (5" to 6" in diameter) or maybe 1 or 2 medium to large bowls. Rick Morris (aka Rick Turns) came up with a space saving idea using readily available materials. His kiln idea can be set up to dry a bowl(s) and then disassembled when done. With my small shop, this idea was really appealing. Rick's video goes shows how he made his kiln/drying box- Never one to let well enough alone, I had to add my twist to what Rick did. If the entire heat/air mechanism could be incorporated into one unit, storing it would be easier and I might not forget where I put all of the pieces. I used Sketchup to design a one piece unit To hold the unit snuggly to the card board box, there are a couple of long sheet metal screws that pierce the box and grab the cardboard. Some foam rubber, self sticking, air barrier tape makes a pretty good seal. I had to experiment with the bulb size to prevent the temperature from going too high. So far this is a workable idea. The Sketchup model is available to anyone who wants it. Kilns work by applying heat to the outside of the wood and migrating to the inside. What if we applied the heat to the inside and allowed it to migrate out? A turner, somewhere, thought- "the microwave heats like that!" Placing the rough blank in the microwave for a few minutes at a time can be used to drive out the moisture. This turner suffered severe injuries when his wife returned home and found him in her kitchen. If you decide to use this method- buy your own microwave! Again, I've tried to find reputable sources for ideas and tips. The first 2 are from the AAW and contain additional links to more information- https://www.aawforum.org/community/threads/drying-wood-in-oven-or-microwave.6855/ And- https://www.aawforum.org/community/threads/microwave-bowl-drying.9555/ This video, from Kent Weakley, describes the process and provides a bunch of tips Another method of applying heat is to use a dehydrator. With the proper temperature settings this can also be a viable drying procedure Next up we'll look at some not so traditional methods of drying
-
- rick morris
-
(and 8 more)
Tagged with: