Search the Community
Showing results for tags 'cane'.
Found 12 results
-
Lots happening with our turners this week! Our Patriot Turners- We have a new member at the Patriot who is also a turner! @calabrese55 showed us some of his work when he introduced himself. How about this beautiful segmented turning- Check out his post and give him a Patriot welcome! He also posted another bowl in our "Monday Morning" forum- Check it out here- Our "What's On Your Lathe" was also hot this week. New posts start here- Some of the images from @teesquare, @forty_caliber and @calabrese55 @Steve Krumanaker turned a cane for his daughter and his son cast the knob. Andy his an expert on casting! See the cane and the back story in Steve's post- Our resident ornament expert, @Ron Altier, gave us his impressions on turning bamboo. Ron's conclusions are that's it's probably not the best overall species for turning. In one of our posts, there was a mention of the Lichtenberg burning process. @Gerald was kind enough to do a little research on safety when doing this. The process, when ALL safety precautions are observed, can create beautiful patterns. High voltage is dangerous when we become complacent. My neighbor, the electrical safety training officer in our borough, was electrocuted on the job. Insulation, isolation, incomplete human electrical path and full awareness are a must. This is what Gerald found- What’s Coming Up- Click on the images for links to more information and registration- For The Newbies- Richard Raffan turns a nice little shallow dish in real time. Mike Peace shows how to turn a simple but elegant lidded box. He even makes a special chuck to hold one of the pieces. Holding turnings can be challenge. Home made chucks supplement purchased ones. Sometimes adding modifications to a purchased chuck is the answer as Alan Stratton shows us. Looking for an inexpensive gift? How about salt and pepper SHAKERS. This video from Craft Supplies USA shows us how to make them- Expand Your Horizons- Mike Waldt completes a beautiful elderberry vase- Mike also demonstrates his method of turning finials. This video is from a live feed so it is a little long- New Turning Items- Last week we posted a review from Mike Peace on his new Powermatic 2014 lathe. Mike has a chance to use it and has posted more of his impressions- Ron Brown has release his new lathe mounted disk sander Here's the link to more information- https://www.longworthchuck.com/index.php?route=product/product&path=66&product_id=477 Woodturners Wonders is now a Vicmarc Dealer Check out their complete line- https://woodturnerswonders.com/collections/vicmarc?_kx=gV5SF2As_3IwtBi5TrpHVQM0F3UvGVbQKzhWGippDlk%3D.VJvU8R Some great prices, at Spiracraft, on Easy Wood Tools products @Jordan Martindale ! https://spiracraft.com/?inf_contact_key=d8ae9197ac7a87c978260b58c8e41427 Everything Else- Boy did this bring back memories! Safe turning
-
Our daughter has some auto immune issues and when she's having a flare up she needs a cane. Couldn't find one with a handle she liked so she asked to make her one. This is one of those turnings that isn't real flashy and doesn't look like much but it is one of the most difficult things we do as a wood turner IMO. That long taper is tough to do, at least for me. The wood portion is about 33" over all, 1" at the top and 3/4" at the tip. Our son did the resin cast for the knob. The shaft is white oak and looks good at a glance, hands will find some low spots though.
- 8 replies
-
- 12
-
-
-
- lathe
- woodturning
- (and 4 more)
-
Just a reminder that we are about 2 weeks into our summer raffle to help offset the costs of running the Patriot site. If you haven't already picked up your tickets for some awesome prizes, here's the scoop! Our Patriot Turners- Our turners were back at their lathes this week! @RustyFN posted his curly maple segmented bowl and it is a beauty! Rusty received lots of positive comments about it. Check out the post at- @AndrewB turned a slightly different style pepper mill. The grinding mechanism is different from his past turnings- Andrew shows us his progress from the rough blank to the finished mill- Andrew also gave us a review of his new buffing system He gave us the link to this product in his post- One of our long time members posted his first turning. @Ron showed us the beginnings of a cane he is making- He received lots of encouragement and some suggestions on this turning- @forty_caliber poste a question about using the parting tool. Check out his post and see if you can offer some suggestions or ideas- @Steve Krumanaker started turning a tall vase from flame box elder. Looks like this is going to be a beauty! More images in Steve's post- Just a note here, if you subscribe to the Woodworker's Journal, next issue has an article about flame box elder- https://www.woodworkersjournal.com/box-elder/ Steve has decided to up his game, when deep hollowing, and ditch the laser pointer for a more advance method of determining wall thickness. Check out his post on his most recent upgrade- @Gerald challenged us to post our Mother's Day turning gifts. Gerald's gift turning is fantastic! See additional images and our member's comments in his post- I need to start writing down the trails to some of the stuff for each weeks Wednesday's... I can't remember how I came across this video of Gerald's presentation to the Magnolia Woodturners- What’s Coming Up- A little something different from Cindy Drozda- Click on the above image to Cindy's site and registration information. From the AAW- Click on the above image for the link to more information and registration. For The Newbies- We have been linking videos from Record Power on lathe maintenance. Although aimed at a specific lathe model, the information can be pretty much applied to any lathe. Here is part# 3Part# 3 of Mike Waldt's beginner series for turners. Again this is a replay of a live session and is kind of long. From the World Wide Wood Turners, a nice demonstration on various methods of holding a turning. Expand Your Horizons- Mike Waldt has something for the more advanced turner in this video- Alan Stratton's take on chasing threads Mike Peace recently published a video on the various types of spiraling and texturing tools. Within the video, Mike refers to links for longer videos on each tool. He also has a PDF article that can be downloaded at- https://www.mikepeacewoodturning.com/2019/05/03/texturing-and-spiraling/ IMHO, there can be no greater honor than to be asked to create a burial urn. Sam Angelo has a video demonstrating how to calculate the internal volume using some easily made measuring devices. New Turning Items- Robert Sorby Brand Ambassador Darryl Jones introduces the Deluxe Sovereign TurnMaster Box Set- The folks at Woodturners Wonders have a heavy duty compass capable of drawing 28" circles. Check it out at- https://woodturnerswonders.com/products/12-inch-carpenters-compass Premier Gauges has some interestingly designed wall and bottom thickness gauges- More information can be found at- https://premiergauges.com/ Everything Else- Rick Turns list of YouTube woodturning videos from last week- I had one last piece of cherry but it had some pretty nasty cracks. Decided to see what could be found inside. I'm surprised that I could get this much. Sill a couple of cracks that will need taken care of At this point I normally submerge the piece in the soap and water solution for a couple of days and then on to drying in a paper bag with shavings. Turned out my pot is only 12" in diameter!. I CA'ed the cracks, wrapped the bowl in stretch wrap and put it in my little drying box (ala Rick Turns). Then for the cleanup! Safe turning and stay well
- 5 replies
-
- 5
-
-
-
- woodturners wonders
- compass
- (and 31 more)
-
well got my lath finally,and started to turn lol,first attempt at new cane,thought best to start small,cause wife wants new legs for table,lots of fun
-
Several years ago I made a couple of walking canes for my wife and myself. I used 1" dia pine stock from HD and some spalted Apple (maybe Maple) plus an exotic wood for the handle. I shaped the shaft with the sander and stained it. I stained the shaft and finished it all with a nice clear shiny finish. It was very cold at the time and I set them aside. Many things have occured and they stayed stored in a corner for a long time. A couple of days ago we went for a hike and I took the canes with us. I wanted to see what adjustments needed to be made in length and comfort. I knew they were too long. I discovered much more needed adjusted for me. My handle was made all wrong form my hands. It was to thick and the shape pushed my fingers together. Another big thing was the finish, it was too slick. I removed the handle and put it back on the lathe. Then put ridges and valleys in for my fingers. I shaped it to accommodate the variances in my hands by turning valleys and then grasping it with my hand for comfort. I kept doing this until it felt good for my hand size and irregularities. After reassembly and cut to length, I applied a non slippery clear finish. We are happy with them and did discover that they are really nice to walk with. They help with balance and catch us if we trip. At our age, that is a big plus.
-
Here are pictures of some of the hiking staffs I just completed. Merry Christmas to all. Don R
-
It's been a busy week for me but no turning. Computer upgrades and a 1960's tube type stereo problem. Can you believe a 6GW8 vacuum tube is $49.95 + shipping!!!!!!!!!!!!! Our Patriot Turners- @HandyDan posted a pictorial journey of a super cane he made. He explained how he made this beauty and gave us some really great tips! Please check out Dan's post and see how he did this- @Ron Altier used his new Easy Wood Tools faceplate to turn a sweet little pine box. He explained how he felt about the new faceplate in his post- Ron also posted a picture of the new faceplate. Everyone who has used the Easy Wood Tools faceplates agreed with his assessment. @Gerald showed us a "twisted" box he turned. At first I thought it might have been made on a Legacy lathe but Gerald explained how he did it- @Jim from Easy Wood Tools shared a video with us from the "Dread Knot Workshop". This really demonstrates what can be done with the new Easy Wood Tools mini hollowers! What’s Coming Up- The American Association of Woodturners 33rd Annual International Symposium Raleigh, North Carolina July 11-14, 2019 Registration can be done at- https://www.woodturner.org/page/2019RaleighRegistration For The Newbies- @Gerald shared a link to a video series on Beginning Woodturning. The videos are from Fine Woodworking and the author is Mike Mahoney. You can find the link in Gerald's post- We all know lathe chucks are expensive. Every once in a while we might stumble into a good deal but unfortunately the chuck threads and the headstock spindle may not match. Mike Peace put up a video explaining how spindle adapters/inserts may just allow you to take advantage of that good deal- Expand Your Horizons- Some time during the past couple of weeks, one of our turners posted a recommendation for a turning text. I believe it was @Steve Krumanaker. Steve wasn't sure if he did it but he knew the book I was trying to reference. Click on the above image for a link to Amazon to see more about this book. New Turning Items- The folks a Woodturners Wonders have a new respirator available. I'm not sure how this would work with a face shield- Check out the specifications at- https://woodturnerswonders.com/products/cleanspace2-respirator Everything Else- In case you missed the separate post on this https://www.woodworkersjournal.com/woodturning-monthly/?utm_medium=email Tim Yoder has a two part video on turning "Drink Covers". Tim's videos are always a treat to watch. Check out his use of his Easy Wood Tools!!! Part 2 is linked from Tim's YouTube page. Safe turning
-
Got the cane I've been working on done this week. This is the first one I made in two pieces. I started out with two brass bushings. Threaded them to a 3/8" coarse thread. Turned them down to 5/8" and turned notches into the outside so the epoxy had something extra to grab onto. Took a couple 3/8" bolts and drilled a chamfer in the heads to give them a true center point to ride the live center. Did this to make sure they met well when screwed together later. Took a 36" x 1 1/4" birch dowel and cut it in half. Found the centers and drilled a 5/8" hole in one end of each piece and epoxied the bushings in. Drilled the holes using the lathe. Mounted them in the lathe and turned them to a gentle taper and smoothed them out. Even at 18" long they want to chatter. I find a two wheel steady is all that is needed for this. I made it to fit the banjo from another lathe and is easily adjusted for height and closeness. Looked online at Google images for cane handles and decided on which one I liked. Drew it out on a piece of Purpleheart cut it out on the band saw and used the spindle sander to shape it from there. Lots of hand sanding after that but worth it. While turning the shafts I added some small beads under the handle and again at the joint to conceal it. Burned lines between the beads too. I used the lathe as a sculpting vise for the handle. Here is some pictures of that.
-
Saw this on another site today. Not my subject matter (snake or mouse) but the patience, detail, techniques, craftsmanship and vision is something to behold plus it has dog cameos.
-
I was approached by a gal at work asking if I could make a custom cane for her father who needs to use one, but refuses to. I gathered some information from her about her father: 1) he was an avid cb'er - handle was night hawk 747 2) he loves fishing 3) he is a man of God (a minister) 4) his name is Sam 5) his favorite bible verse is Philippians 4:16, and..... 6) he loves the "fish" symbol With that information I proceeded to layout a customized cane for Minister Sam i am extremely glad to hear he refuses to leave home without it and he is excited that the cane initiates many conversation providing him the opportunity to preach the Word of God. Some of the pictures are before the cleanup after staining. I lightly sand the piece to cleanup the areas where the stain got onto the surface.
- 10 replies
-
- 11
-
-
- cane carving
- chip-carving
- (and 3 more)
-
A friend of mine hurt his leg real bad when he slipped on some ice about six weeks ago. After an operation to repair the damage he has been on crutches and is now allowed to start putting weight on it and walk. I made him a cane to help him along. I'm 6'0" and a 36" cane is good for me so since he is 6"6" I made his 39" and it works well for him. Turning the long part required a steady rest. The length and thinness made it whip in the middle. For the handle I cut a tenon on the end and laminated three pieces of Cherry together for the handle. I looked at examples of handles and drew one to my liking and roughed it out on the band saw. I then took a half inch wood chisel and pared away the wood from the edges and then smoothed them out with sandpaper and applied wipe on poly for a finish. The top of the cane is 1.25" and tapers to .75" on the bottom. I found some cane tips at Walmart and they were made to press fit on a .75" shaft. Here are the finished pictures.
-
I have been tinkering with cane making. I made one and it didn't come out as I had planned. However it did give me a better idea. So I got out some Walnut and Maple put my idea to work and came up with this one. I like it, it is light, strudy and looks good too.
.JPG.fb3d5c846a87216659f651ddbe34d03a.JPG.09c837106b1a347f50c4a7a2cae34537.JPG)
.png.795ffcd7331d75d58315bc5e3aea40eb.png)
.png.1c587365d8968dcb48bdde5a507c1bf5.png)
.jpg.c483df9432bfe3a3d77c7c511528893f.jpg.9c3c2364dd452210f74313cebd4257f0.jpg)
.jpg.c483df9432bfe3a3d77c7c511528893f.jpg)
