The Patriot Woodworkers with Operation Ward 57 Adopt a Wounded Warrior Family for the Holidays - 2019 project is live, please click on link to view our very special annual project.
Search the Community
Showing results for tags '4216'.
Found 1 result
...from this years' Covered Bridge Festival...I was rummaging through a box of stuff sitting on a table when out of the shadows of one corner of the tent a voice called out "everything in that box is one dollar." Not much in tools in that box or the tent for that matter but I spied this in the dollar box... Craftsman #4216 push drill with (3) bits. Has the same Millers-Falls style chuck. While there is no actual number on this drill, inter-web searches list it as a #4216. I haven't nailed down if this was made for Sears by Dunlap or Millers-Falls. both made push drills for Sears-Craftsman. while the handle is not red tenite, it looks and SMELLS identical to the M-F red tenite handle; has the same sort of "oxidation" too. Spent time with a plastic scraper on the handle removing the build-up, then green Scotch-Brite on both the aluminum and the handle then off to the buffer with appropriate compounds. I chose not to dis-assemble at this time since I had all the others in various states of re-conditioning, Polished up pretty nice. I suspect the plunger spring may have a couple of broken coils since the lower shaft will drop into the barrel when inverted. However it seems to function OK w/o any noise, just weak. Someday, I'll disassemble and take a look. Dremel brush to the bits then brush-on Johnson's Wax. It does bear some resemblance to the "Buck Rogers" and has similar features. When the latch is held back, the handle rotates to dispense a bit at one of eight locations. You can feel a slight detent. anyways, not bad for a buck and of course, I didn't have one like this either...Thanks for looking. BTW, push drill summer hunt/ refurb season is pretty much over. I have several in the queue from past picks and who knows what the winter hunt season may yield.