Search the Community
Showing results for tags 'pictures'.
-
Never done any thing like this so! I think I started with the easiest of the two. I"m using plywood for that will give me some extra lines to tell if I am removing the same amount of wood from each side. And yes it does work. The only aquarium fish I ever saw was guppies but these happen to be ocean type as I was wanting more of an adventure.... I just got through working on my 5 hp 80 gallon air compressor that had quit day before yesterday and I run in to good luck for once for I had bought another compressor very much like the one I already had from brother in law as he was leaving and moving to North Carolina a couple years or so ago. He said he had just got the motor overhauled but he could not make the compressor run....and he was a registered electrician for many years in California before coming back to Texas. Wow, I just happen to see the 4 wires going in to the pressure switch box and yep, he had them installed wrong... I would never have known where they went but a few minutes prior I had just taken the same 4 wires out of the started box so I happed to be lucky for a change. And I kept thinking, please don't be the motor that has worn out or the box that has 4 capacitors for either could cost me a years salary or more but I first tried swapping the pressure switch with the other compressor sitting collecting dust and that fixed my compressor, hurray. So this morning I thought I would celebrate and make some fish. And today my wife told me happy birthday so the compressor thingy did make my birthday a little happier than usual I think for the last 60 years or so I quit celebrating my birthday.
-
I've made a few hundred picture frames from 4"x5" to 4'x6'. Here is a decent article https://www.woodmagazine.com/woodworking-how-to/layout-measuring-marking/the-art-of-picture-framing I get tools and supplies from United Manufacturers Supply https://www.unitedmfrs.com/, a few from Dick Blick https://www.dickblick.com/ and the onsie-twosies from a couple of local art supply stores. I have bought some stuff from the stores like Michaels and Hobby Lobby, but find they are not the most cost-effective (they once tried to charge me $100 for a $12 mat board because that's what they would have charged to have a mat cut that size). I usually make my own framing stock, cutting the profiles with a router and the rabbet on the table saw. Assemble, sand, optionally stain, and apply a finish. You certainly don't need all the tools, but it makes things faster and easier. And for the price of having 2 or 3 things professionally framed, you can buy all the tools you need. I'd get them in this order : Mat cutter, ATG dispenser, point driver (that you can also use to mount glass in frames or cabinet doors with shorter points). There's another good and more indepth article here. The guy that wrote it did a good job. DIY-Picture-Framing - Copy.pdf
-
Here is a topic that may not come up often enough. I am not a professional and do tend to point and shoot, but there are some basics we can all benefit from. Lets start with equipment. A good camera helps, but there lots of them. I like SLR's and have been using them since the early 80's. Now using DSLR. There are plenty of compact cameras out there that will work also. Important is being able to change settings from A,to T to P,or portrait or macro and capability to adjust light balance. The camera does not have to break the bank and if you want a good SLR (film) I have one for reasonable. A tripod is essential to get a good shot and this too could be reasonable as it only needs to hold camera steady but can be difficult to set up so look at reviews before a purchase. A background for the picture helps to eliminate distracting background. Do not use wrinkled fabric. The background should be a neutral color such as gray or gradient gray to white. This can be paper on a roll or plastic in various sizes. You can google search and find many available. The background should go under the work piece. Lighting is essential and it will be very evasive. You will only need one or two light sources and they should be the same color temperature. Do not choose CFL unless you can find the color corrected type. LED's also work just not the white light ones. I use halogen work lights pointed toward the ceiling for reflected light to reduce shadows and glare. You can also use tents and diffusers to soften lights. These you can make from several different fabric types (Tshirt to sheets to shears from curtains) This covers the minimum for photographic equipment to get a good picture of your work. You could spend as much as $2000 or more or as little as 200 based on your budget and how you are bitten by the photography bug. I will be covering other areas in future installments.