Search the Community
Showing results for tags 'cnc'.
-
Light production, as in 4 from one board, but I think they came out nice. At least they came out like I wanted, anyway. The finish is Nitrocellulose sanding sealer followed by gloss lacquer, then Mohawk glazing stain, final finish is semi-gloss lacquer. These are 9" x 11.25" and the board is the Pine/Spruce/Fir glued up boards they have at Lowe's. David
-
This was just a test piece to make sure my file on the CNC was correct, so I grabbed some 1/2" BB before running this on more expensive Maple. Now that I have cut and finished it I may not make another one, not sure yet. I'll give this one to a friend who's on the front line fighting the virus. David
- 4 replies
-
- american flag
- medicus
-
(and 1 more)
Tagged with:
-
I have wanted to cut something like this for a while and this looked like a good project to test in Carveco. I knew the cutting would be fairly straight forward but was unsure how long it would take because I haven't calibrated this type of cutting in Carveco. The material is 1/2" MDF and it took 40 minutes cutting at 200 ipm, one pass with a 60° 5/8" diameter V bit, 18k rpm, 0.03125" stepover, and cut depth of 3/16". Except for the perimeter cuts it rarely got close to 200 ipm. I probably could have set it to 400 ipm and the results would have been about the same. My goal was to make it look old, somewhat weathered, like it had been discovered in the sand on Tatooine and had been there for years. In other words, 'pristine and perfect' was NOT my goal. The finishing steps were as follows - 1) two fairly heavy coats of Nitrocellulose sanding sealer, 2) one really heavy coat of Rust Oleum brown Hammered paint, 3) brushed thinned black acrylic into the recessed areas and wiped it off, 4) placed in oven at 170° for a couple of minutes and turned off but allowed the piece to stay in until the oven cooled, and 5) one good coat of Nitrocellulose semi-gloss followed quickly by a lighter dusting coat. The lacquer caused the underlying coats to crackle a bit and gave me the desired look, at least I am pleased with the way it came out. On the CNC - Two coats of sealer - Brown Hammered paint - After black acrylic and wiped off - Aged look - Aged look close up - Enjoy! David
- 8 replies
-
- cnc
- aztec calendar
-
(and 2 more)
Tagged with:
-
Today was actually a nice day in the shop. I had time to sit down with my CNC and vCarve Desktop to work on some 1911 grips. I’ve been using my Remington R1 as my test fit piece. These were cut cut but I did t get them sanded and a finish put on them today. I guess I can work on that tomorrow afternoon. mahogany on the top, Purple Heart and Leopard wood on the right. These are all cut from G10 material. Slate color G10 cut with a checking pattern A nice fit on my 1911. Slate G10 Stripes with Mag release cut out. Red and Black G10 with Dots. I sanded this with micro sanding paper then buffed it on my 3 wheel buffer. Nice look. Each set gives the 1911 a total different look. I’ve got to get a few more cut tomorrow. It’s back to work at the Gun Store Monday.
-
I'm not a CNC user. Just passing along this link. https://www.youtube.com/channel/UCMrMqMabXS5_cFcq5K9Ob-w
-
I've got a closet in my spare bedroom (storage room) that I wanted to add another clothes hanger rod to. Among my scrap pieces I had two 1.25" diameter closet rod sections that together would be long enough, but neither was long enough on their own. The distance to span is roughly 22". This is a CNC-cut splice joint I came up with to solve the problem. Test cut on smaller scraps shown in the photos. I'm calling it my radial finger joint. Finished spliced rod now loaded with clothes and seems to be able to handle the weight with no complaint. If it does fail eventually I'll report back. 4D
-
After reading @Steve Krumanaker blog on his laser, it has interested me greatly, but on the cnc router level. But Steve's blog really got me thinking on this. Been looking at CNC Router home made plans and there is a whole community out there for this type of do-it-yourself and they are very supportive of one another, very open source, free plans, open source software, and just a neat community altogether. Thanks Steve for showing me.
- 2 replies
-
- woodworking
- cnc
-
(and 2 more)
Tagged with:
-
The CNC forum has moved to The Woodworking Discussion Forum. It is now a sub forum similar to General Woodworking, Turners, etc. Thank you!
-
Back in April, my wife's cousin was diagnosed with Stage 4 esophageal cancer. Subsequent testing indicated it had moved into his liver, and there were blood clots. His family and friends organized a benefit for him that was held yesterday. Sadly, Dwight passed away last Saturday morning. He had a lot of friends and they turned out in droves for the benefit. At last count, the live auction had raised over $47K...and almost $4K for the silent auction. BBQ plates - yes many were sold at $10 each. 450 went out to area businesses on Friday, and probably about that many more at the benefit. I contributed to the silent auction by making a sign with the Jack Daniels logo carved into it. As far as I know, it is a one of a kind. It turned out pretty nice and drew a lot of attention. Thirteen bids in all, and yes, some were repeat bidders. My wife said she noticed one lady that kept walking over to check out the latest bid. We think she may have been the eventual high bidder. And the good part is it sold for $240. That made me really happy. But in all honesty, I think it would have sold for more in the live auction, but that wasn't my decision. There were some deep pockets in the crowd. Here are some pictures of the construction and the auction. It was one of my first efforts with the new CNC. It took me longer to design the project than it did to carve it. RIP Dwight Cahanin. Mike
-
I need to replicate one part several times. It's 5.5" X 2" X 3/4". Material just needs to be fairly rigid, as in mdf or mdo. If you're interested, shoot me a PM. Thanks in advance for any replies.
-
Since this is a forum with a heavy emphasis on patriotism I figured we should have something for those who served in the military. These are the first two I tried. Was also thinking of possibly combining something like this with a bottom "tail" that could be carved with someone's name, dates of service, places of service, or anything one would want. These are cut from 15" blanks. Sizes can be increased to 18 or even 24 inch I would think.
-
Not sure if CNC er is a proper word. My name is Scott, I go by Scottart on most forums. I have been a carver for about 40 years. I say carver and not just wood carver as I also have spent some considerable time carving snow and Ice.. We won the national snow carving competition 3 times and have won a number of ice carving events. I also spend a lot of time chainsaw carving and as a result have way to many chainsaws, die grinders, angle grinders, and small dremel like devises by the box load. My wife and I raised 4 kids. the oldest did 9 years in the Marine Corp so we have a strong affection for the members of the services. While I worked a corporate career, we always had a small business selling my art, carvings, paintings, pyrography and in 2012 we opened up a 3000 sft art gallery on the Parks HIghway in WIllow, Alaska. Willow creek Studio. We have about 60 local artists there, and make all kinds of man cave stuff. log furniture, cabin signs, benches and signs for lodges, and just plain old chainsaw carvings and quite a bit of carved relief panels and doors. The CNC is a major part of our business and the largest single contributor to our income stream. I am currently retiring at 61. the Cnc and the gallery are allowing us to transition to retirement about 5 years ahead of prior schedule. So I am a believer in using the cnc to make money... albeit, our investment is significant with 40 years of marketing behind me, years of exposure as and artist, and a gallery on the major highway in Alaska all combine to make it possible. I use Aspire to create almost all of my models. I occasionally sell some of the models and also just donate a few. Each year we set a side some time to donate some projects for some worthy local military groups. Last year it was a memorial for Vietnam era bomber squadron reunion, and currently I am working on a big wall piece for a returning battalion of Air Cavalry troops. I enjoy helping and learning in these blogs..... feel free to contact me any time. www.scottthompsonart. https://www.facebook.com/WillowCreekGallery/?ref=bookmarks tundrafish1@yahoo.com
- 17 replies
-
I think this is fitting for just about anyone here. Carved from an oddball piece of 16 x 10 cut off aspen.
- 3 replies
-
- shop signs
- signs
-
(and 1 more)
Tagged with:
-
Jay Skelton sent me to Menards and said to get some of these. They are corian, quartz, acrylic (?) pieces that measure about 11.5 inches square. Polish festivals are coming up. Can be used as a trivet, display, or cutting board for serving things like cheese or dips or whatever.
-
Had an order for 3 buffalo nickel banks. Since they do involve a lot of time and finishing I decided to make a few extra while I had everything all set up for each stage. Each one (funny how it worked out this way - must be the magic resizing feature of Aspire) was cut from a single 1 x 12 x 48 Baltic birch glued up board that was on sale at Menards earlier. Not as good as David Falkner's videos, but you people are smart and can put it all together. Started by cutting the inside spacers for the $$ and the pieces for the cradles. Then each side of the "coin" had to be cut. This gave us all the pieces necessary for each bank. Some glue, clamps, and a little cussing gave us the rough banks - ready for sanding and filling where necessary. The two piece cradles lined up nicely, and a little time with the Ridgid oscillating belt sander (this is a life saver - $199 well spent) we were ready to finish. A couple coats of Rustoleum aluminum metallic paint (this is some great stuff), two screws through the bottom and we have finished pieces. The nice thing about the CNC is the same file is used over and over. Everything lined up regardless of what pieces were used.
-
The cause As you know we had a wonderful project that spanned from October to the end of the year of 2017 that involved the Gold Star widow and her two children as assigned to our community by Operation Ward 57. You can see the project at: The Patriot Woodworkers with Op Ward 57 Adopt a Gold Star Family for the Holidays - 2017 The donation During the project we witnessed many forms of heart felt giving, from the actual raffle ticket purchases, to the exchanging of the winnings from one member to another. Every step of the way, everyone who participated in this project performed heroically, I want to thank everyone once again for their giving, and participation in this very important annual tradition of ours. Thank you! Sometimes, things happen in these projects that are, well, just pretty danged cool, and one of those things was the shipment I received from Patriot Woodworker @honesttjohn. The shipment contained one blanket for each member of the Merlo Family. These blankets were hand made by Mrs. Mordus, (spouse of John Mordus aka honestjohn). John informed me the items were on their way, and I was expecting them, but what I was not expecting was the handwork that went into this operation. My own mother is a crocheter, I grew up with the craft, so I understand the time and heart that goes into this craft, the blankets of Mrs. Mordus were knitted. I am showing images of the work the night before we shipped the gifts from our home to the Merlo Family. I want to apologize for the image quality, it was late, the lights were dim in our home, shortly after I took these pictures our kids wrapped each blanket individually and put a name tag on the gifts before we put them in the shipping box for delivery the next day. This knitted blanket was made for Mrs. Merlo, the knitting is exquisite and detailed, can you imagine spending the time that it takes to make every single tiny square and creating those squares methodically around each heart. I had a chance to feel this blanket, it was very soft, and it had considerable heft to it as well, I was tempted to wrap myself in it but my heart said no, the first wrap should be performed by the honored recipient, Mrs. Merlo. Look at those tiny knitted stitches The hearts The following are images of the blankets Mrs. Mordus created for the children, Camilla and Charlie, the baseballs went to the boy, and the butterflies went to the girl. Mrs. Mordus crafted a border around the fleece fabric of both blankets. This is a style of making blankets that my own mother has been wanting to do for sometime now, mom was over at this time, and she closely examined the borders to see how Mrs. Mordus fabricated them. I wish I had taken close up images of the borders, I don't know why I did not. At this writing I am right now kicking myself. Camilla's flutterby blanket Charlie is a baseball fanatic! And of course, do you think @honesttjohn could let that box of blankets ship without something from the shop! John installed a completely wonderful keepsake box for Mrs. Merlo that he created. This was unexpected, a beautiful touch to an already incredible shipment for the Merlo Family. I am not sure what the box was made from, it may have been John's trademark Pine that he uses in many of his plaque projects, hopefully John will chime in here and let us know. And the grand finale, the Merlo kids with their warm blankets on Christmas morning. You can tell they are very happy. We do not have an image of Mrs. Merlo with her blanket, it was not provided, but I can surmise why we do not have that image, well you know how ladies are, early in the morning, just out of the rack, hair not straight yet, I am sure the image is out there, but Mrs. Merlo surely wasn't going to let that one get out! Without further adieu, the kids Charlie and Camilla and their cherished blankets. (these images shown here, with permission given by mom Merlo) Little Camilla showing off mama's blanket In closing Again, I want to thank everyone who was involved in this project, it was a huge success this year thanks to you all. And on behalf of our entire Patriot Woodworker community, Thank you Mr. and Mrs. Mordus for this very special gift, that will keep on giving to this family for years to come, as they curl up during cold season with these blankets. This topic is long over due, and I want to also apologize to @honesttjohn for taking so long to get this up and live, thanks for your patience John.
-
Had an order for 30+ backers that a brass plate would affix to. I never made 30 of anything before so it was a learning experience. This is what they had to look like. Of course, that's not a shape included with Aspire so a quick email entitled "Help" was sent to MEBCWD. Once the file was made (rather easily and quickly) I cut a 4' - 1 x 12 poplar glued up board from Menards in half, put the two pieces together, let the program copy and line up the rows and columns with it's array copy feature. Saved the file and hit go. Repeated the process 3 times and we had 36 identical plaques. Could have done it in two cuts of 18 each but was unsure of the layout so I chose to do it in 3 cuts. Cut the tabs and popped them out. Ready to sand and finish. Stained and polyed ready to ship!!!
-
Introduction Our very own Patriot Woodworker John Mordus, or better known in our circles as @honesttjohn, is an artist on CNC (computer numerical control) woodworking. John was one of the first CNC woodworkers to join our community and helped crowd our new CNC forums. One of John's favorite creations he performs on his CNC machine are the military plaques he enjoys carving. You can see his CNC gallery featuring these very plaques here at: John's Contribution John contacted us and asked us if we could use any of his work to benefit our current project for our Gold Star Widow Nicole Merlo. As you all know we are in the midst of raising funds for the Merlo Family. The carvings below are for sale. All the proceeds from the sale of these items will be used to purchase their Christmas meal for the family, which is a stipulation of our project as assigned to us by Operation Ward 57. Yes I know, 200 dollars is a good fair amount for a Christmas meal, but let's hope the Merlo Family will have a Christmas meal they will never forget! Perhaps they'll invite some friends over, perhaps they'll go a Prime Rib route in addition to the traditional Turkey and Ham. Whatever they decide to do, it will be memorable, and they can shop without worry for their memorable Christmas meal as provided by you, The Patriot Woodworker's. Each plaque has approximately 10 hours of glue up and carving labor into them. These are American Crafts of high quality and workmanship. (shipping will be paid by the TPW community, so that all 200 dollars will reach the Merlo Family) How to purchase Please leave a reply to this topic here if you wish to purchase one or both of these beautiful carvings. Keep in mind, these are also displayed throughout our Merlo Family project portals such as Facebook and Twitter, we reserve the right to sell these carvings outside of our Patriot Woodworker community, all here will be notified immediately if one or both carvings sell outside of our community before they sell here. In Closing We want to thank everyone who has contributed to this project with your raffle ticket purchases, your "getting out the word campaigns", just being here, and all your best wishes for the success of this years Christmas project. And we want to thank John Mordus for his material contribution to the project. You all have come through wonderfully this year, nothing more can be asked of you all, we have some big donors of treasure through our raffle, and we have had some very important smaller donors through our raffle, because even though they don't have much for themselves, they still managed to come up with a few extra dollars to help make a difference in a Gold Star widows Christmas. All contributions hold equal weight, we have all given what we can, and most importantly, it was all done with heart. We truly have the greatest and smallest woodworking community in the cyber world. After all, we are: The Few, The Proud, The Patriot Woodworkers! Thank you Patriot Woodworkers!
-
Had a lady who wanted a Xmas gift for her dad that could be handed down when the time came. He was very proud of serving his country as well as his Polish heritage. She wanted to incorporate it all as well as having the family name. I had to play with it for a while. The Marine emblem just didn't fit in with all the other components. This is what we agreed on, and she was very very happy when she picked it up. Ended up about 22 x 18 finished. She even tried to give me a generous tip, so she also got a camping sign to give as another gift.
-
This is an amazing piece of equipment but, I'm easily impressed. http://lumberjocks.com/mikeacg/blog/103346
-
Last week, I received my order of a little GearBest 1.6 w. Laser engraver. Friday, my son and I....actually my son and 12 Y.O. grandson...assembled it. I watched. My son is a robot tech and assembly was easy for him. I would still be arranging the parts. I left it at his house in Tucson and he's going to going to get it up and running. He's somewhat of an Arduino freak and wants to play around with getting the laser to interface with a Raspberry Pi instead of a computer. All, way above my pay grade. So, I guess I've stuck my toe .... barely... into the CNC world. My son is a busy guy so, it may be a while before we'll have an operational machine. But, I've got plenty of other toys to keep me out of trouble.
-
OK, I going to try and stimulate this section a little bit with a simple challenge. If you were to guide a complete newbie on what to get, how to configure it, best sources of equipment and prices, and what software to use, what would your advice be for that person starting out? Recognizing that this is a broad subject, in order to narrow it down a little, and provide some guidelines, consider that; it is for hobby shop use, cost/size should be best value for the price, ease of set-up, ease of programming (best software), etc. I think that this should cover it...you get the idea. Basically, a primer on how to get started for someone who wants to get involved in CNC type work. Let's see where this goes and eventually get a step by step guide available as a suggested guideline. Bill
- 11 replies
-
-
A while back I got a set of plans for a kids rocking dinosaur. It was printed on both sides of a large piece of paper and folded like a road map. The parts were "traceable" as advertised, BUT large pieces of carbon paper were required and the various parts had lines that crisscrossed each other all over the place. To keep the original plans I tried making a copy but that turned out to be a mess. Then I got a bright idea and sent it off to MEBCWD to see if he could work his magic and turn it into a CNC file. He emailed me a file back that showed up like this. Mike is good with Aspire. He's even better than good, and ...... reasonable. $$ well spent. Got busy cutting parts out of 1" panels and 2 x 12's Parts are cut out!!! I took the edge off the exposed edges with a round over bit and did a little (very little) sanding. The rockers were just mirrored, so they were exactly alike. A cut up piece of 1 x4 and the platform was made. Now the big test. Will the parts all go together. So far so good! A couple of minor adjustments and the dino fit on the platform. There's 2 - 2 1/2 " construction screws in each foot driven in from the bottom. Mixed up some Rustoleum Hunter Green and Gloss White paint and made a mess. You can saw a wooden ball in half and make fancy eyes or cheat like I did and go to Michaels. The mouth is just painted on. It could be Vcarved if you wanted to do the two sided carving step. Advantage of using the CNC --- all the parts are as exact as you need for assembly. The band saw was never turned on. Each part is exactly the same allowing you to make 3-4-5 units at a time. Or, as many as desired, even if it's just one. Sanding is minimal. More on the finishing surface than the edges. Once you have a file on a thumb drive, you save it and bring it out whenever needed.
-
Drafting and Design Have an idea you can’t translate into a drawing? The Design Services team at Laguna can help you with your design goals. 3D Modeling We can create models from scratch or using existing documents tailored for your manufacturing capabilities and provide file formats you can use with your CAM software. Toolpathing Our Design Services team can prepare toolpaths for your existing designs to get you up and running quick. If you want, we’ll even explain the process to you after so you understand each step. Software Training Our objective is to make sure that Laguna Customers have all the tools to bring their ideas to reality. We offer in-house and online software training sessions for VCarve, Aspire and RhinoCAM customers.
- 1 comment
-
- software
- laguna tools
-
(and 1 more)
Tagged with: