frenchwwr Posted January 17 Report Posted January 17 So with all the cold weather, I took some time to look at some of my lesser-used tools to get them into shape/sharpened so if I did want to use them they would be ready. I started with my many sets of Auger Bits and found a few pieces I didn't know what they were so I'm starting here HandyDan, steven newman, Grandpadave52 and 1 other 3 1 Quote
HARO50 Posted January 17 Report Posted January 17 And I thought I had some weird tools! Grandpadave52, steven newman and Larry Buskirk 3 Quote
frenchwwr Posted January 17 Author Report Posted January 17 @HARO50I'm only getting started. It's looks like it will be a long winter steven newman, Larry Buskirk, Grandpadave52 and 1 other 4 Quote
John Morris Posted January 17 Report Posted January 17 Moved topic to Members Submitted What's It Larry Buskirk, steven newman, HARO50 and 1 other 3 1 Quote
Gerald Posted January 19 Report Posted January 19 #1 looks like a marking tool. #4 new style drill bits for a brace but I have never seen any like those. #5,6,& 7 extension for a brace. I have a couple of those in my collection. Larry Buskirk, Grandpadave52, steven newman and 1 other 4 Quote
kmealy Posted January 19 Report Posted January 19 #1 is a drill bit for making square holes. Either that or a reamer for tapered holes like in a chair seat. steven newman, Grandpadave52 and HARO50 3 Quote
steven newman Posted January 20 Report Posted January 20 1) Reamer for a Brace 2) Forstner style bit 3) Twist drill bit and a drill point for a brace 4) Extension for twist drill bits for a Brace drill 5) Gardener's Pruner Gerald, HARO50, Grandpadave52 and 1 other 3 1 Quote
Popular Post frenchwwr Posted January 21 Author Popular Post Report Posted January 21 (edited) From the Auger Bit Reference download that I just found: I also found extensions like the one above but mine is slightly different. I haven't found the reamer yet but then there are 313 pages to the download and the reamer is unmarked. Edited January 21 by frenchwwr Headhunter, HARO50, Grandpadave52 and 2 others 5 Quote
steven newman Posted January 22 Report Posted January 22 That Eric Brown is the fellow that does the Nickel Plating on my "Old Tools"....about a 45 minute drive, from my house. Grandpadave52, DuckSoup, Fred W. Hargis Jr and 1 other 4 Quote
frenchwwr Posted January 22 Author Report Posted January 22 I just sent him pics of that extension. It wasn't in download. Grandpadave52, DuckSoup, steven newman and 1 other 4 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.