Popular Post Larry Buskirk Posted September 27, 2022 Popular Post Report Share Posted September 27, 2022 21 hours ago, steven newman said: Monday? Monday? Meh....wake me up for a Monday? Let me know when Tuesday get here.... It's Tuesday. Fred W. Hargis Jr, Cal, Harry Brink and 6 others 1 7 1 Quote Link to comment Share on other sites More sharing options...
Popular Post Cal Posted September 27, 2022 Popular Post Report Share Posted September 27, 2022 16 hours ago, Fred W. Hargis Jr said: Somber day at our house Very sorry to hear this Fred. Larry Buskirk, HARO50, Fred W. Hargis Jr and 4 others 6 1 Quote Link to comment Share on other sites More sharing options...
Popular Post Woodman Posted September 27, 2022 Popular Post Report Share Posted September 27, 2022 The Crafting of Week 40 began Thursday with timber yard scavenging, then the butchering (sectioning) of a beam with circular saw. Continued Friday with 2.75 hours ∆ Delta table saw action and an excellent vending experience (translation: new friends ) Saturday. Great head start for this week; small trays just about done. I'm nearly ready for a clean sweep fore and aft, to begin final assembly of Table No. 5. Heartpine deck, rails, legs. The top is three planks butt-joined, planed, scraped, ready for action. The frame is dado'd to accept the top; I'll rabbet the corners together then sink in a few 1/8" birch dowels. And try not to forget to insert the deck before closing up the top's frame. Then figure out simple folding legs. The prototype sold two weeks ago, and I prefer two tables, so gotta git'er done. Thinking of a dado blade for the TS. A single blade with flat teeth is fine, as my width depends on the stock, which is never consistent. I've been getting a lot of action out of Gerald's suggestion to hold my hand plane diagonal to direction of travel. It is nearly time to sharpen the 60 1/2, touch up the others, and burr a few card scrapers - I've got half a dozen with clean square edges; my new practice is to dress all of them to square then burr a couple at a time; the scraper will tolerate a fresh burr a few times before leaving circulation to await the file. How about you, John Morris? Time to share steven newman, lew, Cal and 4 others 7 Quote Link to comment Share on other sites More sharing options...
Popular Post Woodman Posted September 27, 2022 Popular Post Report Share Posted September 27, 2022 On 9/26/2022 at 7:35 AM, Cal said: apple ply Mmmm … need to hit a diner for a nice wedge of pie and a vanilla milkshake steven newman, HARO50, Fred W. Hargis Jr and 4 others 6 1 Quote Link to comment Share on other sites More sharing options...
Popular Post Grandpadave52 Posted September 27, 2022 Popular Post Report Share Posted September 27, 2022 19 hours ago, Fred W. Hargis Jr said: Somber day at our house (huge understatemant). We just got back from having our little dog put to sleep. Only 5, she developed some kind of neural problem where she couldn't stand, walk, or do much of any movement. I gotta tell ya', it hurts. We really loved our little dog. My deepest sympathies Fred. So sorry to hear. She was a cutie and quite protective of her family and property recalling my visit there. She knew she was loved. Prayers for both you and Marie. HARO50, Cal, Woodman and 4 others 6 1 Quote Link to comment Share on other sites More sharing options...
Popular Post Grandpadave52 Posted September 27, 2022 Popular Post Report Share Posted September 27, 2022 (edited) Mrs Grandma Grandpadave took yesterday off trying to use up vacation time so she had plans which I learned included me. She drove but we ran some errands. One stop included a visit at the local GM hospital to visit the Buick. Long talk with Assistant Service Manager resulted In a simple diagnosis of, "after working on it for the past week, we're clueless. Everything checks out...all the work done so far prior to us has been done well. I have my top tech on it...IDK, NEVER saw anything like this on this engine family." Waiting on a response from Buick today...still considering engine replacement or at least a "long block" as the fix??? Seems like an expensive long shot guess to me. Out of the thousands of these on lots across the country, leave it to me to pick this one at random. Lots of catch up projects on the list after losing the past couple of weeks due to COVID cooties.Still pacing myself as I'm short on HP myself. Wonder if changing my engine would help? Careful out there this week whatever you're doing and especially if you're located in Florida. Edited September 27, 2022 by Grandpadave52 lew, Woodman, steven newman and 3 others 6 Quote Link to comment Share on other sites More sharing options...
Popular Post steven newman Posted September 27, 2022 Popular Post Report Share Posted September 27, 2022 Tuesday it is! Made a Lumber Run this afternoon.... 8bft of Spalted Maple 24 bft of Ash Cost? other than the gas for the round trip....$25 for the lumber....mainly all 1 x 6s...took a while to both load up the Chevy Equinox, and then unload it into the house...that Ash is heavy...had to cut some of the boards down, so that they would fit into the Chevy...I'm bushed... stay tuned.. HARO50, Fred W. Hargis Jr, Cal and 4 others 7 Quote Link to comment Share on other sites More sharing options...
Popular Post Grandpadave52 Posted September 27, 2022 Popular Post Report Share Posted September 27, 2022 (edited) 49 minutes ago, steven newman said: Tuesday it is! Made a Lumber Run this afternoon.... 8bft of Spalted Maple 24 bft of Ash Cost? other than the gas for the round trip....$25 for the lumber....mainly all 1 x 6s...took a while to both load up the Chevy Equinox, and then unload it into the house...that Ash is heavy...had to cut some of the boards down, so that they would fit into the Chevy...I'm bushed... stay tuned.. Do I smell a project(s) for September oops, I meant October brewing in Ohio? Edited September 27, 2022 by Grandpadave52 HARO50, lew, Cal and 4 others 2 5 Quote Link to comment Share on other sites More sharing options...
Popular Post Grandpadave52 Posted September 27, 2022 Popular Post Report Share Posted September 27, 2022 On 9/26/2022 at 7:17 AM, John Morris said: Please tell us what's happening in your shops, your life, Big weekend approaching isn't it "poppa". You ready? Nervous? Cal, steven newman, Woodman and 2 others 5 Quote Link to comment Share on other sites More sharing options...
Popular Post Woodman Posted September 27, 2022 Popular Post Report Share Posted September 27, 2022 1 hour ago, steven newman said: $25 for the lumber Wow, even driving 60 miles west to the sawmills near Conowingo, I can't get hardwoods less than $2/bd.ft. ! So, I was a'thinking . . . You know you are a woodworking enthusiast when . . . A slice of fudge cake looks as good as a freshly-made block of parquet stock. forty_caliber, Cal, HARO50 and 4 others 5 2 Quote Link to comment Share on other sites More sharing options...
Popular Post John Morris Posted September 27, 2022 Author Popular Post Report Share Posted September 27, 2022 1 hour ago, Grandpadave52 said: Big weekend approaching isn't it "poppa". You ready? Nervous? Ye it is Gramps! And guess what, I came down with a horrible flu today, home from work trying to get well before the big day this Saturday. Timing is everything aint it? I've been pretty stressed about the whole thing, and I think my immune system took a hit. Grandpadave52, lew, Woodman and 4 others 2 5 Quote Link to comment Share on other sites More sharing options...
Popular Post Grandpadave52 Posted September 27, 2022 Popular Post Report Share Posted September 27, 2022 2 hours ago, John Morris said: Ye it is Gramps! And guess what, I came down with a horrible flu today, home from work trying to get well before the big day this Saturday. Timing is everything aint it? I've been pretty stressed about the whole thing, and I think my immune system took a hit. Dang, sorry to hear that John. Take care of yourself. Perhaps it's just a case of the pre-wedding jitters. I've heard about a few grooms bellowing for "Ralph" prior to the ceremony. Preacher took a good look at my best man and groomsmen just prior to walking out to the alter then said, "wait a minute, let me look at the bottom of your shoes." Apparently he had encountered encyptic as well as not so subtle messages in previous ceremonies when the couple kneeled at the alter. Fred W. Hargis Jr, Larry Buskirk, lew and 5 others 1 7 Quote Link to comment Share on other sites More sharing options...
Popular Post steven newman Posted September 27, 2022 Popular Post Report Share Posted September 27, 2022 Teaser? Hard to get the full lengths in ONE photo....there are 8 boards at 1 x 6 x 4' standing in front of the taller ones... 1 x 6 x 6' Ash...and a sample of the Maple.. Camera turned things a bit reddish..found a single defect in all of these boards... And this was it... Letting these sit a few days..while I figure out a Project or two..one for the Ash...one for the Maple. Stay tuned.. Larry Buskirk, Cal, Woodman and 4 others 7 Quote Link to comment Share on other sites More sharing options...
Popular Post Gerald Posted September 28, 2022 Popular Post Report Share Posted September 28, 2022 I know the feeling as we lost one at six. Sorry to hear Fred W. Hargis Jr, lew, steven newman and 5 others 4 1 3 Quote Link to comment Share on other sites More sharing options...
Popular Post Gerald Posted September 28, 2022 Popular Post Report Share Posted September 28, 2022 Just this this week steven newman, Cal, Woodman and 5 others 3 1 1 3 Quote Link to comment Share on other sites More sharing options...
Popular Post Grandpadave52 Posted September 28, 2022 Popular Post Report Share Posted September 28, 2022 8 minutes ago, Gerald said: Just this this week WOW. Where you headed.? HARO50, Fred W. Hargis Jr, Larry Buskirk and 3 others 6 Quote Link to comment Share on other sites More sharing options...
Popular Post Gerald Posted September 28, 2022 Popular Post Report Share Posted September 28, 2022 Alaska Fred W. Hargis Jr, HARO50, Cal and 3 others 2 4 Quote Link to comment Share on other sites More sharing options...
Popular Post Grandpadave52 Posted September 28, 2022 Popular Post Report Share Posted September 28, 2022 2 hours ago, Gerald said: Alaska I'm old and don't get out much so PICTURES PLEASE! Cal, steven newman, HARO50 and 3 others 6 Quote Link to comment Share on other sites More sharing options...
Popular Post lew Posted September 28, 2022 Popular Post Report Share Posted September 28, 2022 2 hours ago, Gerald said: Just this this week That’s a BIG boat! Cal, HARO50, steven newman and 3 others 5 1 Quote Link to comment Share on other sites More sharing options...
Popular Post Larry Buskirk Posted September 28, 2022 Popular Post Report Share Posted September 28, 2022 10 hours ago, Gerald said: Alaska Winter can't come fast enough for you? We've got Frost/Freeze warnings just a bit north, and west of us. steven newman, Fred W. Hargis Jr, HARO50 and 3 others 4 2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.