Popular Post Larry Buskirk 16,168 Posted January 22 Popular Post Report Share Posted January 22 ...Almost forgot it was Friday Folks! ...Well now that I've remembered that,... it seems like there's something I do on Fridays. ...While I try to remember what that is. ...What's on Your Weekend Agenda? Cal, Gunny, lew and 5 others 2 6 Quote Link to post Share on other sites
Popular Post Cal 8,945 Posted January 22 Popular Post Report Share Posted January 22 Raining pretty good here right now and supposed to keep it up til about mid afternoon. So I don't have a lot on my agenda for today. Supposed to be warmer and sunny tomorrow, so that will be yard work if it's not too windy. Have a bunch more pruning to get done. Also working on my truck. Pulled the rear (seats) out and trim on the rear of the cab. Plan to replace with some type of insulation and flat surface to make the space useable for whenever we use the truck for fetching or traveling. DuckSoup, Thad, Larry Buskirk and 5 others 8 Quote Link to post Share on other sites
Popular Post Gunny 59,537 Posted January 22 Popular Post Report Share Posted January 22 Wet and kinda crappy. Arrived at work, boss is back from vacation, and in good mood. After yesterday's disaster I had braced for impact. Especially when I walked in with my arm in a sling. My apprentice will be working alot harder next few days. HARO50, DuckSoup, Thad and 8 others 4 7 Quote Link to post Share on other sites
Popular Post JimM 2,945 Posted January 22 Popular Post Report Share Posted January 22 4 minutes ago, Gunny said: My apprentice will be working alot harder next few days. Whoa, there - that sounds like management! Fred W. Hargis Jr, Gene Howe, DuckSoup and 10 others 13 Quote Link to post Share on other sites
Gunny 59,537 Posted January 22 Report Share Posted January 22 In this mess is a battery, battery charger, a tire and a jump box. Or I should say what is left of them. DuckSoup, Artie, FlGatorwood and 7 others 10 Quote Link to post Share on other sites
Popular Post Gene Howe 35,444 Posted January 22 Popular Post Report Share Posted January 22 I have no injuries to limit my production. Old ages takes care of that. After the last few weeks of riding herd on workers, we're finally getting back to the shop. We've got 6 more rafters on that house in the shop to remove. Then, the stud wall can come down. The next major step is insulation against the coming summer heat. But, we're a good ways from that step. After insulation comes the plywood wall sheeting and, finally the wiring. Thinking of THHN, unless @Artie dissuades me. We're hoping to be up and running by mid Aprii. But, who knows? DuckSoup, Gerald, Larry Buskirk and 7 others 10 Quote Link to post Share on other sites
Popular Post HARO50 11,854 Posted January 22 Popular Post Report Share Posted January 22 1 hour ago, Gene Howe said: I have no injuries to limit my production. Old ages takes care of that. You're not alone, Gene. There's a LOT of us in the same boat! p_toad, Gunny, Gerald and 8 others 3 8 Quote Link to post Share on other sites
Popular Post Larry Buskirk 16,168 Posted January 22 Author Popular Post Report Share Posted January 22 1 hour ago, Gene Howe said: I have no injuries to limit my production. Old ages takes care of that. 15 minutes ago, HARO50 said: You're not alone, Gene. There's a LOT of us in the same boat! ............Who am I trying to kid? Thad, p_toad, Artie and 6 others 2 7 Quote Link to post Share on other sites
Popular Post DuckSoup 4,051 Posted January 22 Popular Post Report Share Posted January 22 A couple of things to do to get my table saw useable again and then move onto the router table & install the lift. p_toad, Larry Buskirk, Cal and 6 others 9 Quote Link to post Share on other sites
Popular Post Gunny 59,537 Posted January 22 Popular Post Report Share Posted January 22 Have a helper for next few weeks. Friend's son wants to get his feet wet doing woodworking. As my arm is out if commission for week or so, yeah I'll take some help. Gerald, Artie, Cal and 5 others 8 Quote Link to post Share on other sites
Popular Post Gerald 12,772 Posted January 22 Popular Post Report Share Posted January 22 Completed the tenons on stretchers on the ends of the table. Now to sand what is ready and glue it up. Next after that is to cut and glue up the 8 inch pieces for back of drawer box and then some shelves. Who knows I may be done with this by spring yet. p_toad, Thad, Gunny and 4 others 7 Quote Link to post Share on other sites
Popular Post Gunny 59,537 Posted January 22 Popular Post Report Share Posted January 22 As I am standing around, some quality drooling time is in order. p_toad, Larry Buskirk, Gene Howe and 7 others 9 1 Quote Link to post Share on other sites
Fred W. Hargis Jr 11,695 Posted January 22 Report Share Posted January 22 Gene, just curious...why THHN? Cal and FlGatorwood 2 Quote Link to post Share on other sites
Popular Post Gene Howe 35,444 Posted January 22 Popular Post Report Share Posted January 22 (edited) @Fred W. Hargis Jr, everything will be in conduit and, Romex is to difficult to pull and, a hassle to strip back for each switch, outlet, J box. Plus, I can get by with a smaller dia. conduit. Not that I'm cheap or lazy.... Edited January 22 by Gene Howe p_toad, Cal, Gunny and 5 others 5 3 Quote Link to post Share on other sites
Popular Post kmealy 13,473 Posted January 22 Popular Post Report Share Posted January 22 6 minutes ago, Fred W. Hargis Jr said: Gene, just curious...why THHN? I might be wrong, but I thought if wires went into conduit, it had to be THHN. Or maybe it's that you can't strip off the outside of Romex and use that because the individual wires are not labeled. I have put some Romex in conduit, but only for a few feet as it came down a wall surface mounted or underneath open joists to protect from impact. Gene Howe, Artie, Cal and 2 others 5 Quote Link to post Share on other sites
Popular Post kmealy 13,473 Posted January 22 Popular Post Report Share Posted January 22 Things are quiet here. I am putting some varnish on a couple of projects so dust-making is limited right now. I might be starting to put together a presentation for the wood club on measuring and marking tools, as soon as we decide on the rough content. FlGatorwood, Thad, Artie and 3 others 6 Quote Link to post Share on other sites
Popular Post Gene Howe 35,444 Posted January 22 Popular Post Report Share Posted January 22 (edited) 7 minutes ago, kmealy said: I might be wrong, but I thought if wires went into conduit, it had to be THHN. Or maybe it's that you can't strip off the outside of Romex and use that because the individual wires are not labeled. I have put some Romex in conduit, but only for a few feet as it came down a wall surface mounted or underneath open joists to protect from impact. Well Keith, I didn't know about that requirement. Additionally, even #12 wires are stiff enough to discourage me from wrapping them around the outlet or switch screws. Edited January 22 by Gene Howe Gunny, HARO50, Larry Buskirk and 4 others 7 Quote Link to post Share on other sites
Danl 1,443 Posted January 22 Report Share Posted January 22 37 minutes ago, kmealy said: I might be wrong, but I thought if wires went into conduit, it had to be THHN. That is the way you should do it where I live. I believe heat build-up is the issue otherwise. Danl Cal, Gunny, Larry Buskirk and 1 other 4 Quote Link to post Share on other sites
Larry Buskirk 16,168 Posted January 22 Author Report Share Posted January 22 56 minutes ago, Gene Howe said: everything will be in conduit and, Romex is to difficult to pull and, a hassle to strip back for each switch, outlet, J box. Plus, I can get by with a smaller dia. conduit. Not that I'm cheap or lazy.... Never met a mouse that could chew into conduit, but have seen sections of romex stripped clean. Never could figure out why there were no electrocuted bodies nearby. Artie, Gunny, FlGatorwood and 2 others 3 1 1 Quote Link to post Share on other sites
Fred W. Hargis Jr 11,695 Posted January 22 Report Share Posted January 22 That is the code, THHN in conduit...the part I was unaware of was Gene' plan to use conduit. FlGatorwood, Cal and Gunny 3 Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.